aCS ACR1552U-A2 AquaGuard NFC USB Reader User Manual
- June 1, 2024
- ACS
Table of Contents
Advanced Card Systems Ltd.
Card & Reader Technologies
User Manual V1.00
ACR1552U-A2
AquaGuard NFC USB Reader
Introduction
ACR1552U-A2 is the USB NFC waterproof reader developed based on 13.56 MHz
contactless technology. It is an IP67 contactless reader that can access
contactless smart cards following the ISO 14443, ISO 15693 and ISO 18092
standards. MIFARE® (T=CL), FeliCa, NFC Tags, SRI/SRIX, CTS, Innovatron,
Picopass and Topaz Card are also supported.
Certified with an IP67-compliant rating that ensures complete protection
against the ingress of dust and water, AquaGuard is thus an ideal choice for
outdoor applications. It also complies with both CCID and PC/SC, this plug-
and-play USB NFC device allows interoperability with different devices and
applications.
This IP67-rated reader is capable of three modes of NFC namely: NFC
Reader/Writer, Card Emulation and Keyboard Emulation. NFC technology not only
supports payment functions but can also be used for various applications such
as access control systems, transportation ticketing, loyalty programs, etc.
The flexibility of NFC readers allows for a wide range of potential
applications and benefits, such as epayment, access control systems, and
transportation ticketing.
1.1. Waterproof Enclosure Design
Certified with IP67, the ACR1552U-A2 USB NFC reader is dusttight and can be
submerged in water for a limited time without damage.
Its waterproof feature significantly expands its potential applications in
outdoor environments, making it a durable and reliable option among NFC
readers available on the market. 1.2. Firmware Upgradeable
Feature To save valuable cost and time, the firmware of ACR1552U-A2 could
conveniently be upgraded in-field to allow users to cope with the fast-
changing technology for their applications in order to suit different
scenarios.
1.3. Multi-Platform Support
ACR1552U-A2 is a PC/SC and CCID-compliant reader. With driver support on
different platforms, ACR1552U-A2 can operate in Windows® , Linux® , macOS and
Android™ operating systems.
Features
- USB NFC Smart Card Reader (Contactless)
- USB 2.0 Full Speed Interface
- Plug and Play – CCID support brings utmost mobility1
- USB Firmware Upgradeability2
- Contactless Smart Card Reader:
- Supports ISO 14443 Type A and B cards
- Supports ISO 15693 cards
- Supports ISO 18092 NFC
- Supports MIFARE® (T=CL), FeliCa, NFC Tags
- Supports SRI/SRIX, CTS, Innovatron, Picopass, Topaz Card
- Built-in antenna for contactless tag access, with a reading distance of up to 70 mm (depending on tag type)
- Built-in anti-collision feature (only one tag is accessed at any time)
- NFC Support:
- Card reader/writer mode
- Card emulation mode
- Keyboard emulation mode
- Application Programming Interface:
- Supports PC/SC3
- Supports CT-API (through wrapper on top of PC/SC)
- Supports Windows®, Linux®, macOS, and AndroidTM operating systems.
- Built-in Peripherals:
- One user-controllable bi-color LED
- One user-controllable buzzer
- Compliant with the following certifications and standards:
- IP67
- CE
- UKCA
- FCC
- RoHS
- REACH
- WEEE
- J-LIS
- VCCI
- KC
- Microsoft® WHQL
- ISO 14443
- ISO 15693
- ISO 18092
- PC/SC
- CCID
- Applicable under PC-linked mode
- Same as above
- Same as above
Typical Applications
- e-Government
- e-Banking and e-Payment
- e-Healthcare
- Transportation
- Network Security
- Access Control
- Loyalty Program
- Smart Poster/URL Marketing
Driver Installation Procedure
The installation procedure is the same for ACS PC/SC Driver version 1.0.4.0 and above. The latest device drivers of the ACS Smart Card Readers may be downloaded from the ACS Driver Download Webpage: http://acs.com.hk/en/drivers/
To install the ACS Driver:
-
In the ACS PC/SC Driver folder, run the file Setup.exe.
-
Choose the language, and then click OK.
-
The Setup Wizard will be displayed. Click Next to proceed with the installation.
-
Click Next to install the driver to the default folder located at C:\Program Files\Advanced Card Systems Ltd\ACS PCSC Driver 1.0.4.0\, with C as the drive letter of your local drive.
Otherwise, click Change to choose another destination folder.
-
Click Install to begin the installation.
-
Wait for the installation process to finish.
-
Once the driver installation is finished, click Finish to exit the setup wizard.
Technical Specifications
Contactless Smart Card Interface
Supported Card Types
| ISO 14443 Type A & B Parts 1-4, ISO 15693, ISO 18092 NFC,
MIFARE®, FeliCa, SRI/SRIX, CTS, Innovatron, Picopass, Topaz Card
Operating Frequency| 13.56 MHz
Reading Distance| Up to 70 mm (Depending on tag type)
Read/Write Speed| 106/212/424/848 kbps (IS014443) 26/53kbps (IS015693)
Supported NFC Mode| Card Reader/Writer, Keyboard Emulation, Card Emulation
Host Interface
Protocol| USB CCID
Connector Type| USB Type-A
Speed| USB 2.0 Full Speed (12 M bps) compatible with USB 3.0
Supply Voltage| SVDC
Current Consumption| Max. 300mA
USB Firmware Upgrade| Supported
Physical Characteristics
Dimension (LxWxH)| Main Body: 85.0 x 60.0 x 9.0 mm
Weight (±5 g)| 67g (USB Type-A)
Available Colour| White
USB Cable Length| 1 m (Non-detachable)
Peripherals
Buzzer| 1 x Programmable Buzzer (Mono-tone)
LED| 1 x Programmable LED (Blue & Green)
Operating Condition
Temperature| 0 – 60°C
Humidity| 90% (Non-condensing)
MTBF| 500,000 Hours
Certifications & Compliances
Certifications| CE, FCC, UKCA, VCCI,
KC, RoHS, REACH, WEEE, J-LIS Microsoft’ WHQL, IP67
Comfiances| USB CCID, PC/SC
libraries & Tools
Libraries| CT-API
Tools| Software Develoment Kit
Drivers & Support
Driver Supported OS| Windows’, Linue, macOS, Androidn”
Warran| 1 Year
Model/Part Number
USB Type-A| ACR1552U-A2
macOS is a registered
trademark of Apple Inc., registered in the U.S. and other countries.
Windows® is a trademark of Microsoft Corporation in the United States and/or
other countries.
AndroidTM is a trademark of Google LLC. Linux ® is a registered trademark of
Linus Torvalds in the U.S. and other countries.
FCC Caution:
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
IMPORTANT NOTE:
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm
between the radiator& your body.
Subject to change without prior notice
info@acs.com.hk
www.acs.com.hk