GYROS S107H Drone Alloy 2.4 GHZ Height Hold Helicopter Instruction Manual

GYROS S107H Drone Alloy 2.4 GHZ Height Hold Helicopter

Product Information

Specifications

• Product Name: Drone
• Model Number: S107H
• Brand Name: SYMA
• Contact Person: Ivan
• Telephone: +86-0754-86381701
• RF Frequency Band: 2415-2465MHz
• Transmitter Power: 1.7dBm
• Maximum Operating Ambient Temperature: 30°C

Product Usage Instructions

Safety Precautions

Before using the drone, please read and follow these safety precautions:

• Keep the drone away from children and pets.
• Do not operate the drone in bad weather conditions, such as strong wind or rain.
• Ensure that you have enough open space to fly the drone safely.
• Always keep the drone in your line of sight during flight.
• Do not fly the drone near airports, restricted airspace, or other prohibited areas.
• Turn off the drone immediately if you notice any abnormal behavior or malfunction.

Getting Started

Follow these steps to get started with your drone:

1. Charge the drone’s battery using the provided charger. The charging time may vary depending on the battery level.
2. Insert the fully charged battery into the drone.
3. Turn on the drone by pressing the power button located on the drone’s body.
4. Ensure that the drone and the remote control are properly paired. Consult the user manual for pairing instructions.

Basic Controls

Learn the basic controls of the drone:

• Use the left joystick on the remote control to control the drone’s altitude and rotation.
• Use the right joystick to control the drone’s forward, backward, left, and right movements.
• Press the designated buttons on the remote control to perform additional functions, such as taking photos or activating flips.

Flying Tips

Follow these tips for a successful flight:

• Start with gentle movements and gradually increase your flying skills.
• Avoid sudden changes in direction or altitude to maintain stability.
• Practice in an open area away from obstacles until you are comfortable with the controls.
• Be mindful of battery life and land the drone safely before the battery runs out.

Maintenance and Care

To ensure the longevity of your drone, follow these maintenance and care guidelines:

• Regularly inspect the drone for any damage or loose parts before each flight.
• Clean the drone after each use using a soft, dry cloth.
• Store the drone in a cool and dry place away from direct sunlight.
• Follow the manufacturer’s instructions for battery maintenance and storage.

FAQ (Frequently Asked Questions)

Q1: How long does it take to charge the drone’s battery?

A1: The charging time may vary, but it usually takes around 60-90 minutes to fully charge the drone’s battery.

Q2: Can I fly the drone at night?

A2: It is not recommended to fly the drone at night or in low-light conditions as it may affect visibility and increase the risk of accidents.

Q3: What should I do if the drone loses connection with the remote control?

A3: If the drone loses connection with the remote control, try re-pairing them following the instructions in the user manual. If the issue persists, contact customer support for further assistance.

Q4: Can I replace the drone’s battery?

A4: Yes, you can replace the drone’s battery with a compatible one. Make sure to follow the manufacturer’s guidelines and use only recommended batteries.

it is strongly recommended to read the manual carefully before Flying Inappropriate operations may lead to unintended crashes of injuries (of the pilot or third parties).

Understanding the Transmitter

Installing and charging the battery

Installing transmitter batteries

Transmitter battery installation: open the battery cover at the back of the transmitter. Install 4pcs AA batteries according to the polarity indications (Note: batteries are not included).

1. During the battery installation, it must be ensured that the polarities of the batteries are matched with that of the battery box. No battery shall be installed with the opposite polarity.
2. Please do not use new and old batteries together
3. Please do not use different types of batteries together.
4. Do not use rechargeable batteries.

Charging the helicopter

Charging instructions: switch off the helicopter (on/off switch is at the top of the helicopter); insert the charging cable into a USB port on your computer (the charging cable indicator light will turn on); connect the charging cable to the helicopter (the charging cable light will go off); the charging time is about 60 minutes; unplug the charger cable when the light turns on.

The charging time is about 60 minutes, flying time is about 5 minutes.

Important: battery charging information

• Rechargeable batteries should be removed from the toy before being charged.
• Rechargeable batteries should only be charged under the supervision of adults.
• Exhausted batteries should be removed from the aircraft.
• Caution: Risk of explosion if battery is replaced with incorrect ones. Please dispose the batteries according to the instructions.

Flying Instructions

1. Turn on the transmitter.
2. To turn on the helicopter, move the on/off switch at the top of the helicopter to the ON status/position. The power light will turn on.
3. Place the helicopter on the ground. Make sure the rear end of the helicopter faces the pilot.
4. Move the throttle stick fully up and after fully down. The helicopter indicator lights will stop flashing and turn solid indicating successful pairing. The helicopter is ready to fly.

Height Hold
Use the left stick (throttle) to achieve the desired height and after allow the left stick to fall back to its default middle position.

Up/Down
When the left stick (throttle stick) is pushed up/down the helicopter will ascend/descend.

Left/right rotation
When the right stick is moved left/right the helicopter will rotate left/right.

Forward/Backward
When the right stick (directional stick) is pushed up/down the helicopter will fly forward/ backward.

If the helicopter begins to rotate quickly while hovering (left stick is not moved left/right), please adjust the trim button on the transmitter until the helicopter starts hovering as normal.

If the helicopter rear end motor spins clockwise making the helicopter unstabel, please press the right trimming button on the transmitter until the helicopter regains stability.
Notice: Make sure the rear end of the helicopter faces the pilot.

If the helicopter rear end motor spins counter clockwise making the helicopter unstabel, please press the right trimming button on the transmitter until the helicopter regains stability.
Notice: Make sure the rear end of the helicopter faces the pilot.

Safety Guide

1. Non-rechargeable batteries should not be recharged; Batteries should be inserted with a correct polarity; Different types of batteries, new or used batteries should not be mixing.
2. The supply terminals should not be short-circuited.
3. Only use the included charger.
4. Attention: Drone assembly under adult supervision.
5. Open the battery cover of the toy with screwdriver.
6. The packing has to be kept since it contains important information.
7. Charger used with the drone should be examined regularly, such as the cord, plug, enclosures and other parts. In case of any damages is found, please stop using it unless it is repaired or replaced.

FCC

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements.
“This device complies with FCC radiation exposure limits set forth for general population (uncontrolled exposure).

This device must not be collocated or operating in conjunction with any other antenna or transmitter.*

Decoration of Conformity Inserts:
“Hereby, GuangDong Syma model drone Industrial co.,Itd, declares that this drone is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU,*

A copy of the full DoC is attached.

Operating Instructions:
The product is made out of light and thin materials. Inappropriate operations may lead to unintended crashes. It may cause the helicopter to be easily damaged.
After flying the helicopter avoid touching the motors. The motors may be very hot and can cause burns if touched.

Flying Environment:

1. Suitable for flying in calm indoor areas. Pay attention to air conditioner/electric fan air flows.
2. Spacious areas. Rocommended flying area size: 20 feet X 20 feet wide and 10 feet heigh.
3. Calm areas. It is strongly recommended to fly in areas without air flows. Do not fly in areas with: air conditioners/electric fan or table lamp, or other electric equipment that may be easy damaged.

Accessories/Parts (Optional)

The following parts can be selected by a customer. For your convenience, we have selected every part and accessory. The parts and accessories can be purchased throuah local distributors.

• Do not mix old and new batteries
• Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) battorico
• This equipment maximum operating ambient temperature is 30°C

RF frequency band :2415-2465MHZ
Transmitter power :1.7dBm
Sold to EU country product name: [Drone] model number: [S107H] Brand name :SYMA
Contact person: Ivan
Tel: +86-0754-86381701

Hereby, [SYMA MODEL AIRCRAFT], declares that this [Drone ] is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
The full test of the EU declaration of conformity is available at the following internet address: www.symatoys.com

SIMPLIFIED EU DECLARATION OF CONFORMITY

Manufacturer
Guangdong Syma Model drone Industrial Co., Ltd.
The Crossing of No.2 West Xingye Road and North Xingye Road, Laimei.
Industrial Park Chenghai District Shantou City Guangdong China.
The company has the right of final interpretation of this instruction manual statement.

References

• SYMA Official Site

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>