BORMANN BLF2000 Solar Light Installation Guide
- June 4, 2024
- BORMANN
Table of Contents
BORMANN BLF2000 Solar Light
Installation Instructions
Inspection before installation
Connect the floodlight and solar panel, solar panel faces the sun and/or
bright light, the floodlight doesn’t work; Disconnect the solar panel, the
floodlight works. Push button “Auto”, it lights on; Push button “OFF”, it
lights off. The solar floodlight works properly.
P.S: The remote control distance: 8-10 meters
Solar Panel Installation
Install the solar panel on the roof or wall; The solar panel faces south and
westward 5-10 degree, have a certain angle to the roof/wall, generally 30
degree in south, 45 degree in north. Picture 1.
P.S: Make sure the longest direct sunlight time, it cannot be sheltered
by other buildings or trees; it cannot be installed under the glass or indoor.
Floodlight Installation
Install the floodlight and adjust the angle of light as necessary. Connect to
the solar panel, and fix the waterproof cap. Picture 2 & 2a.
Safety Notes
Do not connect to solar panel with voltage output 6V or above, to avoid damage
to the battery of the solar flood light;
Do not connect to the 220V power, to avoid damage to the solar flood light;
Install the light and solar panel firmly, to avoid damage to the people in
windy weather;
Do not open the solar lights; it will affect the warranty;
Clean the surface of the solar panel regularly, in order not to affect the use
of the lights;
Check the cable connector regularly for the loosening or being blown off by
the wind;
After installation, the lights must be charging more than 3 hours before
using;
After the waterproof connector is connected, it must be wrapped with
electrical tape for several rings, to prevention of leakage of electricity;
The solar panels must be installed in an area where sunlight is not blocked.
Picture 1
Remote Control Instructions
| AUTO | Auto Mode, Keep light on whole night. |
|---|---|
| OFF | Turn Off |
| 3H | Keep light for 3 hours. |
| 6H | Keep light for 6 hours |
| 8H | Keep light for 8 hours |
| Power Consuming. Red: Battery storage < 30%;
Green
Battery storage 30% 80%; Red & Green
Battery storage 80% 100%.
MT| Turn on/off in the day; Double press.
Technical Data
Model| Power| Solar Panel| Battery| Luminous
Efficacy| Additional Specs
---|---|---|---|---|---
BLF2000| 25W| 6V 8W| 3.2V 6Ah| 90Lm/W| Ra>70, IP65, 4000K, Remote
control
BLF2100| 40W| 6V 12W| 3.2V 12Ah| 90Lm/W| Ra>70, IP65, 4000K, Remote
control
BLF2200| 60W| 6V 20W| 3.2V 18Ah| 90Lm/W| Ra>70, IP65, 4000K, Remote
control
BLF2300| 100W| 6V 25W| 3.2V 24Ah| 90Lm/W| Ra>70, IP65, 4000K, Remote
control
BLF2400| 150W| 6V 30W| 3.2V 25Ah| 90Lm/W| Ra>70, IP65, 4000K, Remote
control
BLF2500| 200W| 6V 35W| 3.2V 30Ah| 90Lm/W| Ra>70, IP65, 4000K, Remote
control
- The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the products. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired.
- Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.
- To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.