kogan NB14T20DSBA Adjustable Dress Form User Guide
- June 4, 2024
- Kogan
Table of Contents
NB14T20DSBA Adjustable Dress Form
User Guide (SIZE 14-20 & 8-14)
NB14T20DSBA & NB8T14DSBKA
COMPONENTS
A Pole | D Hem Gauge Arm |
---|---|
B Base | E Dress Form |
C Sliding Slotted Legs |
OVERVIEW
ASSEMBLY
- Assemble the pedestal by sliding slotted legs (C) into the base (B), and repeat with four legs. (see below pictures).
- Insert Hem Gauge Arm (D) onto the pole (A).
- Insert pole (A) into the base (B), and ensure the pole sits well in the base.
- Stand up the base assembly and let the dress form (E) slide gently over the top of the pole assembly.
- To rotate from 90°, lift the dress form slightly and turn.
Tips:
- Keep the plastic bag provided to cover the dress form and help eliminate dust
- For form-fitting dresses, always leave a vertical seam partly open, and finish sewing the seam after having removed the dress from the form
- To close the dress form, use the following sequence: waist height adjustment, neck dial, bust dials, waist dials, and hip dials
ADJUSTMENTS
Waist Length Adjustment:
To lengthen the torso/waist, turn the red collar slightly to the left to
disengage retainer teeth, pull down until the desired length is obtained, and
twist the collar to the right to re-engage the teeth. To return to the
original height, simply reverse the procedure.
Adjusting Body Sizes:
- Using the desired body measurements, begin with the bust measurements
- With one hand hold the body form and with the other hand compress the upper white and lower red indicator together located on the front dial marked “AB”
- Turn clockwise until the red indicator lines up with the bust measurement. Release dial.
- Follow with adjusting waist size (AW) and hip measurement (AH).
- Program sizes on the back panels from top to bottom and then two sides from top to bottom
Personalizing Figures:
To personalize for larger or smaller bust cups or for narrower or wider backs,
adjust the four bust dials (AB) to compensate so that their sum total divided
by four equals the total bust size.
Example:
(Front 90cm + Side 88cm + Side 88cm + Back 94cm) / 4 dials= 360 / 4 = 90cm Hip
measurements may also be customized by adjusting hip dials (AH)
Neck Adjustment
Adjust neck size after having properly adjusted body sizes. To adjust, depress
and turn the neck dial. Check collar size with a flexible tape measure.
Setting the Hemline Gauge:
With the hem gauge bar in the horizontal position, disengage the center collar
retaining clip. Slide the collar up or down until the top of the collar lines
up with the required height.
Engage the center collar retaining clip. For full or flared hemlines, place
the dress on the dress form inside out or turn the hem up to face.
Need more information?
We hope that this user guide has given you the assistance needed for a simple
setup.
For the most up-to-date guide for your product, as well as any additional
assistance you may require,
head online to help.kogan.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>