levenhuk WA10-S Discovery Report Sensor for Weather Stations Instructions

: June 4, 2024
: levenhuk

Table of Contents

levenhuk WA10-S Discovery Report Sensor for Weather Stations
OVERVIEW
Getting started
Sensor connection
Specifications
Care and maintenance
Battery safety instructions
Levenhuk Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

levenhuk WA10-S Discovery Report Sensor for Weather Stations

OVERVIEW

Wall mount hole 7. Sensor connection status
°C/°F button 8. Outdoor temperature
Battery compartment 9. Outdoor humidity
Channel switch (1—3) 10. Current channel
Stand 11. Low battery indicator
LED indicator
Sensor connection status
Outdoor temperature
Outdoor humidity
Current channel
Low battery indicator

Getting started

Open the battery compartment cover (3) and insert 2 batteries. Close the cover.
Remove the protective films from the sensor display.

NOTE! Each remote sensor that is to be connected must be operated on a different channel.

Sensor connection

Place the base station and the remote sensor within the effective transmission range. Ensure that the channels are assigned after you set up the power supply for the base station and all the sensors.
If the reception is successful, the display will show the temperature and humidity of the respective outdoor sensor. If the values are not received from a channel, “– – _ – –°C” appears on the display. Сheck the batteries and try it again. Check if there is any source of interference.
When changing batteries, replace the batteries first in the base unit, and then in all the sensors, to re-establish the connection. If you change the batteries only in one of the devices (for example, in the sensor), the signal may not be received correctly.
The effective range may differ depending on the unit’s position. Due to interference (various remote control devices, etc.), the maximum distance between the base unit and the sensor may be significantly reduced. In such cases, we suggest moving the base unit and sensor a little. Sometimes it is enough to move one of these units a few inches!

NOTE! Although the sensor is weather resistant, never place it in direct sunlight or in the rain or snow.

Specifications

Radio signal frequency 433MHz
Radio signal radius up to 100m (328ft.)
Operating humidity range (outdoors) 1… 99%
Operating temperature range (outdoors) –50… +70°C (–58… +158°F)
Power supply 2 AAA batteries (not included)
Dimensions 40x104x26mm (1.6×4.1×1.0in.)

The manufacturer reserves the right to make changes to the product range and specifications without prior notice

Care and maintenance

Take the necessary precautions when using the device with children or others who have not read or who do not fully understand these instructions.
Do not try to disassemble the device on your own for any reason. For repairs and cleaning of any kind, please contact your local specialized service center.
Protect the device from sudden impact and excessive mechanical force.
Store the device in a dry, cool place away from hazardous acids and other chemicals, away from heaters, open fire, and other sources of high temperatures.
Operate the device only in a completely dry environment and do not touch the device with wet or damp body parts.
Only use accessories and spare parts for this device that comply with the technical specifications.
Check this device and its cables and connections for any possible damage before use.
Never attempt to operate a damaged device or a device with damaged electrical parts! Damaged parts must be replaced immediately by an authorized service agent.
If a part of the device or battery is swallowed, seek medical attention immediately.
Children should use the device under adult supervision only.

Battery safety instructions

Always purchase the correct size and grade of battery most suitable for the intended use. Always replace the whole set of batteries at one time; taking care not to mix old and new ones, or batteries of different types. Clean the battery contacts and also those of the device prior to battery installation. Make sure the batteries are installed correctly with regard to polarity (+ and –). Remove batteries from equipment that is not to be used for an extended period of time. Remove used batteries promptly. Never short-circuit batteries as this may lead to high temperatures, leakage, or explosion. Never heat batteries in order to revive them. Do not disassemble batteries. Remember to switch off devices after use. Keep batteries out of the reach of children, to avoid risk of ingestion, suffocation, or poisoning. Utilize used batteries as prescribed by your country’s laws.

Levenhuk Warranty

Levenhuk products, except for their accessories, carry a 2-year warranty against defects in materials and workmanship. All Levenhuk accessories are warranted to be free of defects in materials and workmanship for six months from the purchase date. The warranty entitles you to the free repair or replacement of the Levenhuk product in any country where a Levenhuk office is located if all the warranty conditions are met. For further details please visit: www.levenhuk.com/warranty If warranty problems arise, or if you need assistance in using your product, contact the local Levenhuk branch.