Spa World SCSS0009 Sauna Controller Instruction Manual

: June 17, 2024
: Spa World

Table of Contents

Spa World SCSS0009 Sauna Controller
Product Information
Product Usage Instructions
FAQ
Important safety guides
Structure of infrared sauna
Installation process
Installation precautions
Installation precautions
Control panel operation
Control box
Maintance
Troubleshooting
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Spa World SCSS0009 Sauna Controller

Specifications

Product: Infrared Sauna
Operating instruction included

Product Information

The Infrared Sauna is designed to promote a healthy and relaxing experience. It utilizes infrared technology to provide numerous benefits for the body and mind. The structure of the sauna includes various components such as a control panel, control box, heating elements, and ventilation system. Please read the following instructions carefully to ensure safe and effective usage of the sauna.

Product Usage Instructions

Important Safety Guides

Children must be supervised by an adult while using the sauna.
Do not allow them to play with the equipment.
Avoid inserting objects like fingers or sticks into the heating tube plate to prevent any accidents.
Never pour water onto the equipment or heating pipes/boards.
Keep flammable gases or liquids away from the sauna to avoid fire hazards.
Avoid placing any items inside or on top of the sauna.
Do not touch the power control panel or any electrical components with wet hands to prevent electric shock.
Avoid using the equipment during thunderstorms to prevent electric shock.
Do not tilt the equipment or use sharp objects to strike it.
After continuous use of 4 hours, shut down the equipment for at least half an hour.
Avoid operating the equipment in a high temperature environment for an extended period of time.
Exercise caution when using the sauna after consuming alcohol.
Individuals with hemophilia or a tendency to bleed should avoid using the sauna.
If you have any existing medical conditions or are taking medication, consult your doctor before using the sauna.
Wait until your body temperature returns to normal before using the sauna after intense exercise.
If you experience any discomfort, discontinue use immediately.
Be mindful of your head when entering and exiting the sauna.
Do not sleep inside the sauna while it is in operation.
Avoid using any bath products inside the sauna.
To prevent burns, do not touch the heating element.
WARNING: Do not cover the heater or infrared emitter as it may cause a fire risk.
If you have any questions or concerns, please contact the supplier.

Structure of Infrared Sauna

The infrared sauna consists of various components:

Duster cover
Speaker
Control box
Left board
Control panel
Front board
Handle
Door glass
Hinge
Ventilation
Temperature sensor
Top board
Back board
Heater frame
Right board
Bench
Bench front board
Bottom board
Foot rest board

Installation Process

Follow the installation process below:

Start by assembling the bottom board.
Attach the back board to the bottom board.
Install the left and right side panels (left board and right board).
Attach the bench front board.
Place the bench onto the assembled structure.
Install the foot rest board.
Attach the front board.
Finally, install the top board.

Please note that the structure and assembly process may vary slightly depending on the model of the sauna. Refer to the instruction manual for specific details.

Installation Precautions

When installing the left and right side panels, follow these precautions:

Suitable for processes 3 and 4

Refer to the instruction manual for detailed instructions on installing the left and right side panels.

FAQ

Q: Can children use the sauna without adult supervision?

A: No, children must always be supervised by an adult while using the sauna for safety reasons.

Q: Is it safe to touch the heating element?

A: No, touching the heating element may cause burns. Please avoid any contact with it.

Q: What should I do if I experience discomfort while using the sauna?

A: If you feel any discomfort, stop using the sauna immediately and consult a healthcare professional if necessary.

Q: Can I use bath products inside the sauna?

A: No, it is recommended to avoid using any bath products inside the sauna to maintain its cleanliness and functionality.

Infrared makes life more healthy

Due to our continued product improvement, product illustrated on this instruction manual may vary slightly from the actual product.

Warning

The appliance is to be continuously attended；
The sauna room or cabin is to be inspected before setting the appliance to a standby mode for a delayed start.
Cleaning with steam cleaners, high pressure cleaners and spraying water is not allowed.
it is recommended that the infrared cabin should not be used within 24 h after UV radiation exposure from artificial sources or sun-bathing;
individuals who may be at risk from hyperthermia, such as indi-viduals suffering from cardiovascular disease, should seek medical advice before use of infrared warming cabins;
when persistent erythema (reddening of the skin lasting more than a day) and netlike colour changes persist after regular expo-sure to infrared radiation, exposure should not be repeated and medical advice should be sought to prevent development of erythema ab igne;
if you are a person with compromised heat pain sensation or under the influence of alcohol or tranquilizers you should not use infrared warming cabins.
a pilot lamp showing that the heater or infrared emitter is switched on is to be installed in the attendant’s room.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

Important safety guides

Please strictly follow safety precautions when using!

Children must be using the equipment under the care of an adult. For safety, do not play with it；
Do not insert objects such as fingers or sticks into the heating tube plate to prevent danger；
Never pour water to the equipment or the heating pipe (board)；
Do not use or store flammable gas or liquid such as hair spray, oil paint, gasoline, etc near the equipment to avoid fire；
Do not place items inside or on top of the sauna；
Do not touch the power control panel and any electrical components with wet hands to prevent electric shock；
It is forbidden to use the equipment during thunderstorms to prevent electric shock；
Do not tilt the equipment, do not use sharp objects to strike；
Shut down the equipment for half an hour after 4 hours continuous working；
Do not operate the equipment in a long-term high temperature environment；
Use with caution after drinking alcohol；
Those who have hemophilia or are prone to bleeding should avoid using it；
Please consult your doctor before using if you are in period of disease and taking medicine；
Do not use after intense exercise, wait until the body temperature returns to normal before using；
If you feel any discomfort, please stop using immediately；
Mind your head when get in and out of the equipment；
Do not sleep inside the equipment when it is working；
Do not use any bath products in the sauna；
To avoid burns, do not touch the heating element；
WARNING:Covering the heater or infrared emitter causes fire risk!
If you have any questions, please call the supplier.

Structure of infrared sauna

Duster cover
Speaker
Control box
Left board
Control panel
Front board
Handle
Door glass
Hinge
Ventilation
Temperature sensor
Top board
Back board
Heater frame
Right board
Bench
Bench front
board Bottom board
Foot rest board

Attention

The minimum distance between the top of an infrared emitter and the ceiling of the cabinis 100 mm;
The minimum distance between the bottom of an infrared emitter and the floor of the cabin is 40 mm, unless this distance is determined by the construction of the intrared emitter;
The minimum horizontal distance between an infrared emitter and any com-bustible material of the cabin is 5 mm, unless these distances are determined by the construction of the infrared emitter;
The minimum distance between adjacent infrared emitters is 5 mm.

Installation process

The structure may vary from different models.Due to our continued product improvement, product illustrated on this instruction manual may vary slightly from the actual product.

Installation precautions

Large plate assembly

Suitable for processes 3 and 4 Installation method of the left and right side panels
Suitable for process 8 Installation method of the front board

Installation precautions

The product is connected to the main power supply through the cable.
the brown core of the cable is connected to the live wire of the main power supply, the blue core is connected to the neutral wire of the main power supply, and the yellow green core is connected to the ground wire of the main power supply

Control panel operation

Temperate display screen
For temperate.
Timer display screen
For timer.
USB function
Touch this key to start USB function.
Light button
Touch the key to turn on/off the light. See the next page for details.
Power button
Press and hold this button to switch on and off.
Temp control
After heater is turned on, press TEMP- and TEMP+ to adjust the heater temperature.
See the next page for details.
Time control
Touch the ‘+’and ‘-‘ buttons to set the timer from 5 to 60 minutes. Stepping is 5, when the countdown is to 5 minutes,
it will beep 3 times.
Audio function
See the next page for details.
Button lock function
Long press LOCK button for 5S, indicator light is on, it means the button is locked. Long press this button again for 5S to unlock the button, indicator lamp is not light.

Control box

This control box is the control center of sauna room,it is installed on the top board,input/output connections as below.

Main power of sauna room.
Lamp power output cable
Heaters power output cable（LOAD A–LOAD F)
Fuse reset
12V output
- Temperature sensor connection port Control panel connecting
- Antenna
- USB output
- Color lamp power output
- Audio output

Maintance

Before using

Please be sure to follow the instruction manual before operations；
Prepare a towel on the seat bench to prevent sweat from dripping onto it.To avoid affecting the quality and beauty of wood.

After using

Please unplug the power plug in time；
Open the door to let the heat and humid water vapor dissipate and keep the sauna cabin dry.

Stain on wood

The outer cabin can be wiped with a wrung wet towel; The inner cabin can be wiped by small vacuum cleaner.
Do not use organic solvents to decontaminate, such as gasoline, alcohol, etc. wipe the sauna surface;
Do not use sharp objects in sauna cabin to prevent scratching woods.

Stain on glass

Wipe the glass with soft paper;
Stubborn stains can be wiped with a damp cloth, then dry with a dry cloth;
Do not scratch the surface with a sharp object to prevent scratching the glass.

Transportation and storage

Avoid water, snow and intense impact during the transportation;
Do not store it in a humid environment;
The northern climate is relatively dry, often wipe the product with a wrung wet towel;
The climate in the south is relatively humid and can be ventilated and dried frequently.

Troubleshooting

Number	Problems	Possible reasons	Countermeasure

1

|

Indicator light for powersupply not working

| The connector is not connected properly| Check the connector or replace a new one

No power supply input

| Chick the circuity ( especially weather there is power supply input)
Indicator light is broken| Replace the circuity panel

2

|

Indicator light for function is not working

| The heating indicator light is broken| Replace the relevant control panel
The circuit board or components are broken|

Replace the circuit board

The temperature sensor is broken| Check if the connect is loosen and replace it

3

|

Infrared Heater not heating up

|

The heater is broken

| Replace with a new one Of the same specifications
The wire junction or the heater’s wire is loosen| Check and make them tight

The temperature sensor is broken

| Check if junction of the temperature sensor is loosen and replace it
The circuit board of the relay is not work| Replace the circuit board

4

|

Odor from the sauna

|

The circuit‘s problems

| 1) There is eyewinker around, remove it

2）Some heater’s temperature over high,cut off the power

supply,replace it.

Parts on the circuity is broken

Number	Problems	Possible reasons	Countermeasure

1

|

Poor display

| Digital tube quality problem|

Replace the display panel

The controller’s connection is loose

| Check for power

Reconnect the control computer cable

3

| Temperature display is

not normal

| Temperature sensor damaged|

Replace temperature sensor

| | Check if other devices

were paired

| Disconnect the original paired

device

4

| Bluetooth is not paired properly| Check if the Bluetooth version is compatible.

The system supports

version 2.0 or 4.0.

|

Replace the matching version

| | Bluetooth driver module is broken| Replace the four-in-one module

5

|

Radio without sound

| Radio module is broken

Speaker cable is broken or the speaker is broken Motherboard amplifier is

broken

| Replace the four-in-one audio module

Replace the wire or replace the speaker

Replace the motherboard

| | The screen displays EO

and alarms

| Sensor disconnection
6| System

alarm

| The screen displays HH

and alarms

| Excessive temperature
| | The screen displays E1

and alarms

| Sensor short circuit

7

| Stop heating after heating for a while| The system has overload, overcurrent protector action

Temperature sensor partial overheating

| First check if there is an open circuit, if no open circuit, restart

current limit protector

Check why the partial area is overheated

FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement.
To maintain compliance with FCC’s RF exposure guidelines, the distance must be at least 20 cm between the radiator and your body, and fully supported by the operating and installation