BIRDSNAP Smart Bird Feeder with Camera User Guide

June 17, 2024
BIRDSNAP

BIRDSNAP Smart Bird Feeder with Camera

BIRDSNAP Smart Bird Feeder with Camera

FCC WARNING

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation.

ISEDC RSS WARNING

This device compiles with ISEDC licence-exempt RSS standard(s).Operation is subject to the following two conditions: (1)This device may not cause interference, and(2) this device must accept any interference, including interference that may cause undesired operation of the device.

BASIC PARAMETERS

Cable length 3m
Operating voltage 5V DC
Operating temperature -20.5°C to 48.5°C(-5°F to 120°F)

What’s In The Box

If some items are missing or damaged, please contact AI- Birdfy@outlook.com

  • Solar Panel *1

  • Universal Joint *1

  • Socket Nut *1

  • Locking Screw Cap *1

  • Base *1

  • Screws *4

  • Wall Anchors *3

  • Quick Start Guide *1

INSTALLATION

  • Place Solar Panel in an area with consistent sunlight throughout the year. It only needs a few hours of direct sunlight each day to keep your camera powered.
  • Wipe the face of the solar panel with a soft, damp cloth regularly to clear any dust or debris.
  • The amount of energy that the solar panel produces is affected by weather conditions,  seasonal changes, geographic location, etc.

Step 1: Fix the Base to your mounting location using the included Screws.

Installation

Step 2: Install the Locking Screw Cap into the Universal Joint and screw the circular Socket Nut into the Universal Joint.

Installation

Step 3: Screw the Universal Joint into the Solar Panel.

Installation

Step 4: Screw the Locking Screw Cap into the Base.

Installation

Step 5: Adjust the angle of Solar Panel.

  1. Loosen the Locking Screw Cap.

  2. Turn the Universal Joint (sleeve rod ).

  3. Orient the Solar Panel towards a direction with longer light hours (recommended upward 30°)

  4. Tighten the Locking Screw Cap when the Solar Panel is in position.

Customer Support

Email address: AI-Birdfy@outlook.com

Logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals