FISHER PAYKEL AHCLRD80A Classic Handle Kit for Integrated French Door Refrigerator Freezer User Guide
- June 12, 2024
- Fisher & Paykel
Table of Contents
FISHER PAYKEL AHCLRD80A Classic Handle Kit for Integrated French Door
Refrigerator Freezer
Product Information
The AHCLRD80A is a Classic Handle Kit designed for Integrated French Door Refrigerator Freezers with a width of 80cm. The kit includes three pieces of accessory handles that are compatible with RS80A models. It has a classic style that can be paired with a Fisher and Paykel stainless steel door panel or cabinetry panel made by your cabinet maker. The product dimensions are as follows:
- Height: 679mm
- Width: 727mm
- Depth: 55mm
Please note that the specifications mentioned in this manual are subject to change at any time due to our policy of continuous improvement. For the latest information on the product dimensions and specifications, please contact Fisher & Paykel’s Customer Care Centre.
Product Usage Instructions
To use the AHCLRD80A Classic Handle Kit, follow these steps:
- Ensure that you have a compatible RS80A Integrated French Door Refrigerator Freezer with a width of 80cm.
- Identify the location where you want to install the handle kit on the refrigerator.
- If you’re using a Fisher and Paykel stainless steel door panel or cabinetry panel, ensure that it has been installed correctly by your cabinet maker.
- Take the three pieces of accessory handles from the kit and align them with the holes on the refrigerator where you want to install them.
- Insert the screws provided in the kit through the holes on the refrigerator and into the handles. Tighten them securely with a screwdriver.
- Repeat this process for all three handles until they are all securely installed on the refrigerator.
- Test the handles by opening and closing the refrigerator doors to ensure they are working properly.
If you encounter any issues during installation or have any questions about
using the product, please contact Fisher & Paykel’s Customer Care Centre for
assistance.
Classic style Accessory Handle Kit for Integrated French Door Refrigeration, 3
Pieces. Compatible with RS80A. Pair with a Fisher and Paykel stainless steel
door panel or cabinetry panel made by your cabinet maker.
DIMENSIONS
- Height 679 & 727mm
- Width 55mm
- Depth 22.4mm
SKU 26601
The product dimensions and specifications in this page apply to the specific
product and model. Under our policy of continuous improvement, these
dimensions and specifications may change at any time. You should therefore
check with Fisher & Paykel’s Customer Care Centre to ensure this page
correctly describes the model currently available. ? Fisher & Paykel
Appliances Ltd 2020
A PEACE OF MIND SALE
24 Hours 7 Days a Week Customer Support
T 08000 886 605
W www.fisherpaykel.com