8BitDo Pro 2 Wired Controller Designed for Xbox User Manual
- June 3, 2024
- 8Bitdo
Table of Contents
8BitDo Pro 2 Wired Controller Designed for Xbox User Manual
Pro 2 Wired Controller Designed for Xbox
Connectivity
Xbox One / Xbox Series X / Xbox Series S
Connect the controller to your Xbox One and Xbox Series X/S via its USB cable. Status LED is on when the controller is successfully connected
Windows10
- Connect the controller to your Windows device via its USB cable. Status LEO is on when the controller is successfully connected
- Required system: Windows 10 or above
Button Swap
1. press end hold any two of A/B/X/Y /LB/RB/LSB/RSB buttons you would like to
swap
2. press the star button to swap them,profile LEO blinks to indicate the
success of the action
3. press and hold any of the two buttons which have been swapped and press
the star button to cancel it
- Button mapping goes back to its default mode when controller is turned off
- Please visit support.Sbitdo.com for further information and assistance
Volume Control
1. Press and hold profile + up/down to turn up/down in-game volume
2. Press and hold profile + left/righ t to adjust the balance between voice chat and game volume
8BitDo Ultimate Software
Button mapping, thumb stick sensitivity adjustment & trigger sensitivity
alteration
Press profile button to activate/deactivate the customization. LEO turns on to
indicate the activation
- e.g. set P1/P2 buttons as L3/R3 and more
- Available on Xbox/Windows 10/Android/iOS
- Please visit Microsoft Store, App Store, Google Play or support.Sbitdo.com to download the software
Support
Please visit support.8bitdo.com for further information & additional support
FAQ – Frequently Asked Questions
What devices and platforms does the controller work with to play games?
It works with Xbox One / Xbox Series S / Xbox Series X consoles & PC for Window 10/11.
How long is the cable of Pro Wired Controller Designed for Xbox? What is the function of the outer ring on the cable at the front?
The length of the cable is 3 meters, which can meet most of the requirements.
The front head part is a breaker, which is used to prevent the console from
falling down accidentally when dragging.
ATTENTION!!! The breaker can’t make sure to prevent the console from falling
effectively every time, it should also keep the controller close enough to the
console even the breaker is on the cable, so as not to cause cable tension.
What kinds of earphones/headsets is the Wired Pro 2 Controller designed for Xbox compatible with? How do I control the volume of the microphone and earphones/headsets?
Make sure your earphones/headsets has a 3.5mm jack (4-segment, downward compatible with 3-segment). The 4-segment jack has the microphone function and adopted with international standard CTIA. The microphone and your earphones/headsets won’t work if it’s a jack with a 4-segment international standard OMTP. The 3-segment jack is compatible with general stereo earphones/headsets without microphone function. Please confirm the specifications of your earphones/headsets with the manufacturer before using.
About Volume Control:
Press home button(heart icon)+D-pad(↑↓) to adjust the volume in games.
Press home button(heart icon)+D-pad(← →)to adjust the balance between voice
and game volume.
In the process, the controller vibrates when the volume is 50%(Default) and you can hear the beep sound when you adjust the volume to maximum or minimum.
Does Pro 2 Wired Controller Designed for Xbox supported by 8BitDo Ultimate Software ?
Yes. You can use the 8BitDo Ultimate Software on Windows PC , Xbox console(Download from Microsoft Store) and Android /iOS devices. It connects the Android and iOS mobile phones with BLE wireless Bluetooth, it doesn’t interrupt the operation during the game, the settings take effect immediately and it’s much more convenient.
Is Pro 2 Wired Controller Designed for Xbox compatible with the games on Android/iOS?
No. You can only do settings on 8BitDo Ultimate Software for the controller, it’s not compatible with the games on Android/IOS.
What special features does the trigger button have on Pro 2 Wired Controller Designed for Xbox?
The trigger button adopted with hall sensor, the magnetic trigger button feels more evenly elastic with longer service life and accurate pressure sensing control. At the same time, the trigger button is equipped with independent rumble motor, which can be more immersive in games.
What kinds of functions can be set on 8BitDo Ultimate Software for Pro 2 Wired Controller Designed for Xbox? Is macro function available?
It gives you elite control over every piece of your controller: customize button mapping, adjust stick & trigger sensitivity and vibration control. The macro function is not available on this controller.
Does it have a mac version of the 8BitDo Ultimate Software on PC for Pro 2 Wired Controller Designed for Xbox?
No. It only has the version for Windows PC & Xbox consoles.(From Microsoft Store)
Are there any games that support the impulse triggers?
The games that support the impulse triggers are [FORZA HORIZON 4/5] [Gear of wars 4] [Halo 4] [COD] and etc. For any further information please refer to the relevant support description of the game developer.
What causes the indicator to blink when I press a key on the controller?
The controller has the quick buttons swapping feature, the keys you have set for swapping cause the LED indicator to blink when pressing. Hold either two buttons you would like to swap (A/B/X/Y/LB/RB/LSB/RSB) and then press the STAR button to enable the quick swapping function.(LT/RT are not included). Hold the buttons you have set then press the STAR button can return to the default setting.
- The swapping buttons won’t be saved after you power off and reboot the device.
Is the cable connector an USB – A or USB – C?
It is an USB – A connector.
Does it have turbo function while using on PC?
No, it doesn’t. Neither in the 8BitDo Ultimate Software.
Is it compatible with Switch/Windows 7,8/iOS/Android/macOS?
No. But it has the 8BitDo Ultimate Software for iOS/Android.
Is it compatible with the Xbox headset?
Yes, it is.
Is the cable of Pro 2 Wired Controller Designed for Xbox detachable?
No. You can only disconnect the breaker on its cable.
Can I disable the joysticks(L3/R3) inputs if I map them to the back buttons P1/P2?
Yes you can. Just set L3/R3 as “Null” in the 8BitDo Ultimate Software and map them to P1/P2.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>