8BitDo SN30 Pro for Android User Manual
- June 3, 2024
- 8Bitdo
Table of Contents
8BitDo SN30 Pro for Android User Manual
SN30 Pro for Android Diagram
Bluetooth Connectivity
- Press Xbox button to turn on the controller, white status LED starts to blink
- Pess pair button for 3 seconds to enter its pairing mode, white status LED starts to blink rapidly
- Go to your Android device bluetooth setting, pair with [8BitDo SN30 Pro for Android]
- White status LED stays solid when connection is successful
- Controller will auto reconnect to your Android device with the press of Xbox button once it has been paired
Button Swap
- Press and hold any two of A/B/X/Y /LB/RB/LSB/RSB buttons you would like to swap
- Press the star button to swap them, profile LED blinks to indicate the success of the action
- Press and hold any of the two buttons which have been swapped and press the star button to cancel it
- Button mapping goes back to its default mode when controller is turned off
- Please visit https://support.Bbitdo.com/ for further information and assistance
Custom Software
- Button mapping, thumb stick sensitivity adjustment & trigger sensitivity alteration
- Press profile button to activate/deactivate the customization, profile LED turns on to indicate the activation
- Please visit https://support.Bbitdo.com/ on Windows to download the software
Analog Trigger to Digital Trigger
- Press and hold LT+ RT + star button to shift trigger input to digital
- Profile LED® blinks when LT/RT are pressed to indicate they are on digital mode
- Press and hold LT+ RT+ star button again to shift the trigger input back to analog, Profile LED ceases to blink
- Trigger input goes back to its default mode – analog, when the controller is turned off
Battery
| Status – | LED indicator – |
|---|---|
| Low battery mode | Red LED blinks |
| Battery charging | Green LED blinks |
| Battery fully charged | Green LED stays solid |
- Built-in 480 mAh Li-ion with 16 hours of playtime
- Rechargeable via use cable with 1- 2 hour charging time
- Sleep mode – 2 minute with no eluetooth connection and 15 minutes with no use
- Press Xbox button to wake up the controller
- Controller stays on at all times on use connection
Support
Please visit support.8bitdo.com for further information & additional support
FAQ – Frequently Asked Questions
What is the difference between SN30 Pro for Android and SN30 Pro?
The differences are:
A. Different body and button colour
B. Motion control, rumble, Turbo function are not supported
C. Supports button swap function, 8BitDo Ultimate Software, and analog
triggers
D. Works on Android only
What systems does it work with? Does it auto reconnect to those system?
SN30 Pro for Android is a Bluetooth controller, it works with Android devices
to play Cloud gaming with Xbox Game Pass and controller-supported Android
games.
It auto reconnects with the press of START once it has been successfully
paired.
- Cloud gaming with Xbox Game Pass may not be available in some countries/regions, please contact Microsoft Customer Service for details.
Does it work with Windows?
You can use it on Windows 10 and Switch using the 8BitDo USB Wireless Adapter.
Does it work with PS5, Xbox Series S/X, PS3, PS4, Xbox One, Xbox 360, Wii, Wii U?
No, it does not.
How do I change the controller? How long does the battery last when fully charged?
We suggest you charge it via a phone power adapter and original USB cable.
The controller uses 480mAh rechargeable battery with 1-2 hour charging time.
The battery can last up to 16 hours when fully charged.
Does it have vibration?
No, it does not.
Does the Mobile Gaming Clip fit my phone?
The clip is expandable to fit Min 49mm, Max 86mm smartphones.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>