8BitDo Zero 2 Bluetooth Gamepad User Manual
- June 3, 2024
- 8Bitdo
Table of Contents
8BitDo Zero 2 Bluetooth Gamepad User Manual
Zero 2 Bluetooth Gamepad Diagram
- Press t tart tot\lmon thecontroller
- Press & hold start for 3 seconds to tum off the controller
- Press & hold atut for 8 seconds to force tum off the controller
Switch
1. Press Y & start to turn on the controller. Blue LED blinks 4 times per
cycle
2. Press uct button for 3 seconds to enter its pairing mode.. LED starts to
rapidly blink
3. Go to your Switch Home P•g• to click on Controllert. then dick on Chenge
Grip/Order. Blue LED become-S solid when connection is successful
4. Controller will auto reconnect to your Switch with the p,us: of ,tart once
it hu been paired
- Wtien connected to your Switch. select + Dpad_Down = Switch HOME button, select + start = Switch ZL + ZR Button
Windows (X-Input)
1. Press X & start to turn on the controller. Blue LED blinks twice per cycle
2. Press alart button for 3 seconds to enter its pairing mode. LED starts to
rapidly blink
3. Go to your Windows device’s Bluetooth setting, pair with ( 8BitDo Zero 2
gamepad ). Blue LED becomes so1id when connection is successful
4. Controller will auto reconnect to your Windows device with the press of
start once it has been paired When connected to your Windows, select +
Dpad_Down = HOME button
Android
1. Press 8 & ,tart to turn on the controller. Blue LED blinb once per cycle
2. Press Hlect button for 3 seconds to enter its pairing mode-. LEO starts to
rapidty bUnk
3. Go to your Android device’s Bluetooth setting, pair with (8Bit0o Zero 2
gamepad). Blue LEO becomes So1id when connection is successful.
4. Controller will auto reconnect to your Android device with the press of
start once it has been peired.
MacOS
1. Press A & start to turn on the controller. !Mue LED blinks 3times per
cycle
2. Press select button for 3 seconds to enter its pairing mode. LED starts to
ra pidty blink
3. Go to your MacOS device’s Bluetooth setting, pair with [ Wireless
Controller ] Blue LEO becomes solid when connection is succssful
4. Controller will auto recoooect to your MacOS device with the press of
etert once it h.&s been Paired
Battery
| Ststus | LED Indicator |
|---|---|
| Low battery mode | LED blinks |
| Battery charging | Red LED stays solid |
| Battery fully charged | Red LED turns off |
- Buitt–in 180 mAh Li-ion with 8 houra of play time
- Rechargeable via USB cable with 1-2 hour charging time
Power Saving
- Sleep mode -15 minutes with no use
- Press start button to wake up the controller
Support
Please visit support.8bitdo.com for further information additional support.
FAQ – Frequently Asked Questions
What is the difference between Zero 2 and Zero?
Exterior design
A. Controller body color
B. Branding
Compatibility
Zero 2 – Switch, Windows 10, macOS, Steam, Android and Raspberry Pi
Zero – Windows 10, iOS, Android and Raspberry Pi
Firmware
Zero 2 – upgrade-able firmware
Zero – firmware can not be upgraded
Special controller mode
Zero 2 – N/A
Zero – iCade mode for iOS and camera selfie mode
Does Zero 2 have Home button when connected to Switch?
DOWN + SELECT = Home button when connected to Switch.
Does Zero 2 have motion controls and vibration?
No, it does not have either.
How can I fix it when my Zero 2 freezes?
Press and hold START button for 8 seconds to force turn off the controller first, then press START again to turn it back on.
Does Dpad on Zero 2 function as a joystick or Dpad?
Its mapping by default is left joystick. However, it can be mapped as:
LEFT + Select : set Dpad as left analogue stick
Up + Select : reset Dpad
Right + Select : set Dpad as right analogue stick
Press and hold any of the key combinations above for 5 seconds to set the mapping.
LED will blink in red to indicate the success of each mapping.
*You need to reset the Dpad manually.
How can I get to the menu page when playing Switch Online games?
Select+Start = ZL+ZR to bring out the menu.
What systems does it work with? Does it auto reconnect to those systems?
It works with Switch, Switch Lite, Windows 10, macOS, Android, Raspberry Pi.
It does auto reconnect to all the systems mentioned above with the press of
START once they have been successfully paired.
How do I charge the controller? How long does the battery last when fully charged?
We suggest you charge it via a phone power adapter.
The controller uses 180mAh rechargeable battery with 1-2 hour charging time.
The battery can last up to 8 hours when fully charged.
How can I use Zero 2 to control painting applications on my phone/tablet?
A. Press R+Start to turn on the controller.
B. Go to your iOS device bluetooth setting, choose ‘8BitDo Zero 2’ to pair.
C. Go to your painting App and set the controller as ‘keyboard’ before using.
*Suggested App – Clip Studio Paint
Can I use this controller via the USB connection?
No, you can not. The USB connection is for firmware upgrade and power charging only.
Does Zero 2 work with 8BitDo retro receivers and USB adapters?
Yes, it does. It works with all 8BitDo retro receivers as well as USB adapters.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>