8BitDo Ultimate 2.4g Wireless Controller User Manual
- June 3, 2024
- 8Bitdo
Table of Contents
8BitDo Ultimate 2.4g Wireless Controller User Manual
Ultimate 2.4G wireless Controller
- Press home button to turn on the controller
- Hold home button for 3 seconds to turn off the controller
- Hold home button for 8 seconds to force shutdown the controller
- The controller will turn off when placed on the dock
- Plug the 2.46 receiver into the charging dock, then connect it to your windows device via usb cable for better user experience
Windows [ X-input ]
Required system: Windows 10 (1903) or above
Wireless Connection
1. Connect the 2.46 receiver to the USB port of your Windows device
2. Turn the mode switch to X
3. Press home button to turn on the controller, wait till the controller is
successfully recognized by the system to play, status LED stays solid
Wired Connection
1. Turn the mode switch to X
2. Connect the controller to your Windows device via USB cable, wait till the
controller is successfully recognized by the system to play, status LED stays
solid
Android [ D-input ]
- Android system needs to be 9.00 or above
- OTG support is required on your Android device, please contact your manufacturer for more information.
Wireless Connection
1. Connect the 2.4G receiver to the USB port of your Android device
2. Turn the mode switch to D
3. Press home button to turn on the controller, wait till the controller is
successfully recognized by the system to play, status LED stays solid
Wired Connection
1. Turn the mode switch to D
2. Connect the controller to your Android device via USB cable, wait till the
controller is successfully recognized by your Android device to play, status
LED stays solid.
Turbo Function
- Status LED blinks continuously when the button with turbo functionality is pressed.
- D- pad, Joysticks are not included
- Hold the button you would like to set turbo functionality to, then press the star button to activate/deactivate its turbo functionality
Battery
| Controller Status | LED Indicator |
|---|---|
| Low battery | Red LED blinks |
| Battery charging | Red LED stays solid |
| Battery fully charged | Red LED turns off |
| Charging Dock Status | LED Indicator |
|---|---|
| Battery charging | White LED stays solid |
| Battery fully charged | White LED turns off |
- 15 hours of playtime with a 480mAh built-in battery pack, rechargeable with 2 hours charging time
- Charging time with the controller on the dock is the same as charging via USB cable
Ultimate Software
- Press profile switch button to switch between 3 custom profiles. The profile indicator will not light up when using the default setting
- It gives you elite control over every piece of your controller: customize button mapping, adjust stick & trigger sensitivity, vibration control and create macros with any button combination. Please visit support.8bitdo.com forthe application
Support
Please visit support.8bitdo.com for further information & additional support