8BitDo N30 2.4G Nt Wireless Controller User Manual
- June 3, 2024
- 8Bitdo
Table of Contents
8BitDo N30 2.4G Nt Wireless Controller User Manual
N30 2.4G Nt Wireless Controller Instructions
Nintendo Entertainment System & Nintendo Family Computer (Model HVC-101) & Analogue Nt / Nt mini
1. Plug the receiver to your chosen system, Blue LED blinks once per cycle
2. Press start on the controller to pair
3. Blue LEDs on both the controller and receiver become solid when connection
is successful
Battery
| Status | LED Indicator |
|---|---|
| Low battery | Red LED blinks |
| Battery charging | Red LED stays solid |
| Battery fully charged | Red LED turns off |
- Built-in180 mAh Li-on with18 hours of playtime
- Rechargeable via USB cable with 1- 2 hour charging time
- Controller turns off in 1 minute with no connection and 15 minutes with connection but no use
Retrieve a lost connection or connect to a new receiver
1.Turn on the controller then press and hold select button for 3 seconds. Blue LED starts to rapidly blink 2 – Move the controller close to the receiver. Blue LED becomes solid when connection is successful
Support
Please visit support.8bitdo.com for further information & additional support
FAQ – Frequently Asked Questions
What are TA, TB buttons on this controller for?
T stands for Turbo. TA is for turbo A, TB is for turbo B.
What is the difference between N30 2.4G NT and N30 2.4G?
N30 2.4G NT works with original NES / NFC (Model HVC-101) console.
N30 2.4G works with NES Classic console.
Does it have a wireless receiver?
Yes, there is a 2.4g receiver for NES that comes with it.
Can I use two N30 2.4G NT on one NES?
Yes, you can. One receiver for one controller port. One receiver for one controller.
Can I use it on Windows and Switch?
Yes, you can use it on Windows 10 and Switch wired via USB cable.
Does it work with other 8BitDo receivers/adapters?
No, it does not. It only works with the 2.4g receiver which comes with it.
How do I charge the controller? How long does the battery last when fully charged?
We suggest you charge it via a phone power adapter and original USB cable.
The controller uses 180mAh rechargeable battery with 1-2 hour charging time.
The battery can last up to 18 hours when fully charged.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>