8BitDo PCE 2.4G Wireless Controller User Manual
- June 3, 2024
- 8Bitdo
Table of Contents
8BitDo PCE 2.4G Wireless Controller User Manual
PCE 2.4g / TG16 2.4g / PCE Core 2.4g – Instructions
PC Engine mini & PC Engine Core Grafx mini & TurboGrafx-16 mini
1. Plug the receiver to your chosen device, blue LED blinks once per cycle
2. Press home button on the controller to pair
3. Blue LEDs on both the controller and receiver become solid when connection
is successful
Switch
1. Plug the receiver to your Switch, blue LED blinks 4 times per cycle
2. Press home button on the controller to pair
3. Blue LEDs on both the controller and receiver become solid when connection
is successful
- Switch system needs to be 3.0.0 or above. Go to System Setting > Controller and Sensors> turn on Pro Controller Wired Communication
- Please see button mapping reference for Switch
Battery
| Status | LED Indicator |
|---|---|
| Low battery | Red LED blinks |
| Battery charging | Red LED stays solid |
| Battery fully charged | Red LED turns off |
- Built-in180 mAh Li-on with18 hours of playtime
- Rechargeable via USB cable with 1- 2 hour charging time
- Controller turns off in 1 minute with no connection and 15 minutes with connection but no use
Retrieve a lost connection or connect to a new receiver
1.Turn on the controller then press and hold select button for 3 seconds. Blue LED starts to rapidly blink
2. Move the controller close to the receiver. Blue LED becomes solid when connection is successful
Support
Please visit support.8bitdo.com for further information & additional support
FAQ – Frequently Asked Questions
Can I use two PCE 2.4G on one PCE mini?
Yes, you can. One receiver for one controller port. One receiver for one controller.
Can I change Turbo speed?
Yes, you can. The default Turbo speed is 10 times/second.
Press and hold Select+I+II (lower row) for 5 seconds to change Turbo speed.
Blue LED
blinks 1 time: 10 times/second
blinks 2 times: 15 times/second
blinks 3 times: 20 times/second
Can I use it on Windows and Switch?
Yes, you can use it on Windows 10 and Switch wired via USB cable.
Does it work with other 8BitDo receivers/adapters?
No, it does not. It only works with the 2.4g receiver which comes with it.
How do I charge the controller? How long does the battery last when fully charged?
We suggest you charge it via a phone power adapter and original USB cable.
The controller uses 180mAh rechargeable battery with 1-2 hour charging time.
The battery can last up to 18 hours when fully charged.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>