8BitDo N30 2.4G and SF30 2.4G Wireless Controller User Manual
- June 3, 2024
- 8Bitdo
Table of Contents
8BitDo SN30 2.4G Wireless Controller User Manual
N30 2.4G and SF30 2.4G Instruction
To enter pairing mode: Press and hold SELECT for 3 seconds.
Wireless Connection
Controllers will auto reconnect to your devices once they have been paired.
Wireless Connection
1. Plug the retro receiver to your NES / SFC / SNES Classic console.
2. Press START on the controller, the controller will look to pair with the
receiver.
3. Blue LED will stay solid when the connection is successful.
USB Connection
1. Connect the controller to your Windows/macOS/Android via the USB cable.
2. Blue LED will stay solid when the connection is successful.
Press and hold START for 3 seconds to switch the controller modes between
Xinput, Dinput and Mac.
- Xinput is the default mode.
Battery
| Status | LED Indicator |
|---|---|
| Low battery mode | LED blinks in red |
| Battery charging | LED blinks in green |
| Battery fully charged | LED stops blinking |
- Built-in 180 mAh Li-on with 25 Hours of play time.
- Rechargeable via USB cable with 30 minutes charging time.
Power Saving
1. Sleep mode – 1 minute with no wireless connection.
2. Sleep mode – 15 minutes with wireless connection but no use.
Support
Please visit http://support.8bitdo.com for further information and additional support.
FAQ – Frequently Asked Questions
Can I use this on NES Classic Edition too?
es, you can. SN30 2.4g works with NES and SNES/SFC Classic Editions.
*This does not work on original NES or SNES/SFC.
Can I use two SN30 2.4g on my NES/SNES/SFC Classic Edition?
Yes, you can. One receiver for each controller port. One controller for one receiver.
Does it have Reset function?
Yes, it does. DOWN+SELECT = Reset
Can I access the manual wirelessly?
Yes, you can. Just use DOWN+SELECT key combination to access the manual remotely.
Does it work with 8BitDo Bluetooth receivers/adapters?
No, it does not. It only works with the 2.4g receiver which comes with it.
Does the receiver have a USB port? I would be able to use it on other devices if it had a USB port.
No, it does not have a USB port on the receiver.
However, you can connect the controller itself to Windows 10, macOS, Android,
Raspberry Pi via a USB cable.
*This does not apply to Switch.
How do I charge the controller? How long does the battery last when fully charged?
We suggest you charge it via a phone power adapter.
The controller uses 180mAh rechargeable battery with 1-2 hour charging time.
The battery can last up to 25 hours when fully charged.
Can I use it as a wired controller?
Yes, you can.
You can use it with Windows 10, macOS, Android and Raspberry Pi via a USB
cable.
*This does not apply to Switch.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>