8BitDo Ultimate Wired Controller User Manual
- June 3, 2024
- 8Bitdo
Table of Contents
8BitDo Ultimate Wired Controller User Manual
Ultimate Wired Controller
Windows
Required system: Windows10(1903) or above
1 – connect the controller to your Windows device via its USB cable
2 – wait till the controller is successfully recognized by your Windows to
play, status LED becomes solid
Android
- Required system: Android 9.0 or above
- OTG support is required on your Android device. Please contact yourdevice manufacturer for more details
1. Hold B button, connect the controller to your Android device via its USB
cable
2. Wait till the controller is successfully recognized by your Android to
play, status LED becomes solid
Switch
- OTG cable is required for Switch Lite
- Switch system needs to be 3.0.0 or above
- Go to System Setting> Controller and Sensors> Turn on [Pro Controller Wired Communication]
- NFC scanning, motion control, IR camera, HD rumble, notification LED are not supported, nor can the system be waken up
1. Connect the controller to your Switch dock via its USB cable
2. Wait till the controller is successfully recognized by your Switch to
play, status LED becomes solid
Turbo Function
- D-pad, Left stick, Right stick are not supported
- Status LED blinks continuously when the button with turbo functionality is pressed
- Hold the button you would like to set turbo functionality to and then press the star button to activate/deactivate its turbo functionality
Ultimate Software
- It gives you elite control over every piece of your controller: customize button mapping, adjust stick & trigger sensitivity, vibration control and create macros with any button combinations
- Please visit app.Bbitdo.com for the application
Support
Please visit support.8bitdo.com for further information & additional support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>