GIOTECK Smart TV Plus Duo Wireless Controller User Guide
- June 4, 2024
- gioteck
Table of Contents
SMART TV+ DUO WIRELESS
CONTROLLER
PRODUCT OVERVIEW
- Left stick (press for L3)
- View button
- Home button
- Menu button
- Function buttons
- Turbo button
- Directional pad (D-pad)
- Right stick (press for R3)
- Status LED
- Right bumper and trigger
- Left bumper and trigger
- USB connector (for data only)
- Mode switch (located on back of controller)
- USB Wireless Adapter (ships inside the Controller battery compartment).
- USB data cable
BATTERIES
The controller requires 2x AA batteries for Wireless operation. Alkaline or
Rechargeable batteries can be used. Always use the same brand, chemistry,
voltage, and size of battery. Mixing diferent batteries can result in battery
leakage and sub-optimal controller performance.
NOTE: Rechargeable batteries cannot be charged in the controller.
CONNECTION MODES
SMART TV CONNECTIONS
Smart TV models and their apps support diferent connection methods. Some
support both Wired USB and Bluetooth Wireless connections while others only
support Wired USB. Read below for details on how to setup the controller for
Wired USB, 2.4GHz Wireless (using the included USB Wireless Adapter) and
Bluetooth® Wireless connections.
CONNECT USING 2.4GHz WIRELESS
- Set the Mode Switch on the back of the controller to 2.4G and plug the included USB Wireless Adapter into an available USB port on your compatible device.
- Power on the controller by pressing the home button.
- The controller pairs to the USB Wireless Adapter. The Status LED turns ON, not flashing.
CONNECT USING BLUETOOTH® WIRELESS
-
Check your device supports Bluetooth® Wireless.
NOTE: It is recommended to remove the USB Wireless Adapter from any device as the controller automatically searches for this connection. -
Check the controller is OFF and set the Mode Switch on the back of the controller according to the device you plan to connect the controller to (either iOS, Android or PC).
-
Press and hold the home button to power ON the controller and place it into pairing mode (the Status LED flashes quickly to indicate pairing mode).
-
The controller is now discoverable as WIRELESS CONTROLLER on the device that supports Bluetooth®. Follow the instructions on the device to complete the pairing process. If connecting to a Smart TV app, you may need to select “pair a controller” from within the app itself to display the Bluetooth device list and allow the TV to search for the controller.
NOTE: If it takes too long to connect to the device, the controller may exit pairing mode. If this occurs, power OFF the controller and repeat step 3 above.
NOTE: The Controller automatically reconnects to the most recent
Bluetooth® device that it was connected to. On the Bluetooth® device, you can
select to disconnect or forget the Controller to prioritize other connections.
CONNECT USING A USB CABLE
Connect the included USB data cable to the controller and connect the other
end to an available USB port on the device you want to connect to. The
controller should automatically connect with the device.
Note: Connecting the USB cable disconnects wireless connections.
BASIC OPERATION
- To Power On: Press the Home button until the Status LED illuminates
- To Power off: Press and hold the Home button for 5secs until the Status LED turns off.
- When the battery charge level becomes low, the Status LED will flash.
- The function of the View button varies depending on the app or game.
- The menu button accesses game and app options like settings and help.
CUSTOMIZING THE STICK LEDS
The colour of the Stick LEDs can be adjusted or set to OFF. Press down and hold both sticks at the same time to cycle through diferent colour settings. At the end of the cycle, the LEDs will power off. Pressing down on both sticks again will restart the colour cycle.
TURBO FUNCTIONS
Turbo mode: The programmed button is set to continuously activate only while
pressed.
Turbo Hold mode: The programmed button continuously activates without being
pressed.
The following buttons can be set to Turbo or Turbo Hold mode: A, B, X, Y, Left
Bumper, Left Trigger, Right Bumper, Right Trigger.
See the diagram for instructions on how to setup and clear Turbo functions.
TURBO INSTRUCTIONS DIAGRAM
TECHNICAL DATA
Design and specifications are subject to change without notice.
USB Data cable: 2.5m
Wireless Connection: Bluetooth 5.0
Battery type: 2x 1.5 volt AA (LR6)
Battery life: up to 30 hours (depends on battery type, wireless mode, LED
usage)
Voltage: 3V
Operating temperature: -10°C—60°C
Radio frequency: 2402—2480MHz(1MHz)
Frequency band: 2402—2480MHz(1MHz)
Maximum radio-frequency: 0dbm
Mass: Approx. 223g (controller only – no batteries)
CUSTOMER SUPPORT
Do not return this product to store. Contact us, we can help.
See our FAQs at gioteck.com/support
If you still need help, please contact our support team:
support@gioteck.com
FIRMWARE UPDATES
- Visit www.gioteck.com/firmware
- Select the controller you are updating and follow the on-screen instructions.
The controller can be reset to factory settings by inserting a paperclip into the hole on the rear of the controller.
LIMITED WARRANTY
This product is covered by a one (1) year limited warranty.
Visit www.gioteck.com/contact-support for details.
Freemode Go warrants to the original consumer purchaser that product will be
free from defects in materials and/or workmanship for the length of time
specified in the warranty period from the date of purchase as set forth at
gioteck.com/support. If a defect covered by this warranty occurs during the
warranty period, Freemode Go at its option will repair or replace, at no
charge, any part that Freemode Go deems is defective.
This warranty shall not apply if the product has been damaged by abuse,
misuse, negligence, accident, modification, tampering or by any cause unrelated
to defective materials and/or workmanship. Repair or replacement as provided
under the warranty is the exclusive prerogative of Freemode Go. To obtain
warranty services, under certain circumstances, you may be required to return
the item to Freemode Go for inspection and evaluation. You will be required to
provide a valid proof of purchase, including the price paid and the date the
product was purchased for Freemode Go to determine the warranty status.
Products purchased from unauthorized dealers, such as marketplaces i.e. eBay
and Facebook are excluded from this warranty.
In no event shall Freemode Go be accountable for incidental damages resulting
from the breach of any different additional legal rights, including longer
warranty periods, which vary from jurisdiction to jurisdiction. Some
jurisdictions do not allow certain limitations on how long implied warranty
lasts. In addition, consumers have legal rights under applicable national
legislation governing the sale of consumer goods. Such rights are not affected
by warranties set forth herein, except to the extent allowed in law.
SAFETY STATEMENTS
Use and handling
- Before use, check that there is plenty of space around you.
- When using the controller, grip it firmly and make sure it cannot slip out of your hand.
- If using a controller that is connected to a device with a cable, make sure that the cable will not hit a person or object. Also take care to avoid pulling out the cable from the console.
Exterior protection
Follow the instructions below to help prevent the product exterior from
deteriorating or becoming discoloured.
Do not place any rubber or vinyl materials on the product exterior for an
extended period. Use a so of, dry cloth to clean the product. Do not use
solvents or other chemicals.
SAFETY
-
Avoid prolonged use of this product. Take a break at about 30 minute intervals.
-
Stop using this unit immediately if you begin to feel tired or if you experience discomfort or pain in your hands or arms during use. If the condition persists consult a doctor.
-
This product is intended for use with your hands only, do not bring it into close contact with your head, face or the bones of any other part of the body.
-
The vibration function of this product can aggravate injuries, do not use the vibration function if you have any ailment or injury to the bones, joints or muscles of your hands or arms.
-
Permanent hearing loss may occur if the headset or headphones are used at high volume. Set the volume to a safe level. Over time, increasingly loud audio may start to sound normal but can actually be damaging to your hearing. If you experience ringing or any discomfort in your ears or muffed speech, stop listening and have your hearing checked. The louder the volume, the sooner your hearing could be affected. To protect your hearing:
– Limit the amount of time you use headset or headphones at high volume.
– Avoid raising the volume to block out noisy surroundings.
– Lower the volume if you can’t hear people speaking near you. -
Do not stare at the light on the controller when it is blinking, if you experience discomfort or pain anywhere in or on your body from light stimulation, stop using immediately.
-
Never disassemble or modify the product.
-
Do not expose the product to high temperatures, high humidity or direct sunlight.
-
Do not allow the product to come into contact with liquids.
-
Do not put heavy objects on the product.
-
Do not throw or drop the product or subject it to strong physical shock.
-
Do not touch the ports or insert any foreign objects into them.
FREEMODE GO Ltd hereby declares that this product follows the essential
requirements and other provisions of EMC Directive 2014/30/EU and RED
directive 2014/53/EU. The full text of the EU Declaration of Conformity is
available at the following internet address:
www.gioteck.com/docs
This product should NOT be disposed of in normal household waste. It should be
disposed of separately. Please take it to an electrical waste collection
point.
Authorised Representative (EU)2019R1020: Authorised Representative Service 77
Camden Street Lower, Dublin, D02 XE80 Ireland
For help with the set-up or operation of this product please
go to: GIOTECK.COM/SUPPORT
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>