gioteck WX4 Plus Wireless RGB Controller User Guide

: June 5, 2024
: gioteck

QUICKSTART GUIDE

WX4 +
WIRELESS
RGB CONTROLLER

Before using this product, carefully read this manual and any manuals for compatible hardware.
Retain these instructions for future reference.

BUTTON MAPPING

Left stick
Decrease Buttons
Increase Buttons
Function Buttons
Directional Buttonsn
Screen Shots & Turbo
Home Button
Right stick
RGB lighting
R
L
ZR
ZL
USB TYPE-C
Function Button
Function Button
O (Off) / M (On)
Set / Led Control Button

PRODUCT INTRODUCTION

The WX-4 controller is compatible for use with Switch™ & Windows PC
It can be connected via Bluetooth or alternatively through a wired USB connection
It includes both motion control and rumble functionality
Using the built-in Lithium lon battery, it will give an estimated 10 hours playtime.
Full ergonomic design supporting a more comfortable gaming experience

GENERAL INSTRUCTIONS

Reset to factory default mode
Use a paperclip or a safety pin to reset the controller. Insert and press the Reset Button on the rear of the controller.

Firmware update instructions

Please visit www.Gioteck.com/Firmware
Select WX4 Wireless from the list of controllers
Follow the on-screen instructions, and click on “Download Latest Firmware”

SETUP CONTROLLER

Connecting to Switch™ (via Bluetooth)

In settings, select the “controllers” icon
Select the Change Grip/Order
Press the Y and key until the mode LED lights up. The controller will then automatically connect to the Switch™
After successful connection, you will see the controller highlighted in user 1/2/3/4
Finally, press the key to return to the home screen

Shock adjustment

Press and hold the key, and press or can made shock to increase or decrease

Connecting to Switch™ (via wired USB)

Dock the Switch™ console into its base / stand, and then connect the controller via the USB cable.
The controller will automatically connect to the Switch™
After removing the controller from the Switch™, the controller will revert to utilizing a BT connection automatically.

Use for windows PC (via wired USB)

Connect the controller via USB connection. Press the home button.

Use for windows PC (with Bluetooth)

Turn on the Bluetooth function on the computer (or with a BT adapter).
Press the Y and key until the mode LED turns on.
Select “Add Bluetooth device” on your PC and select “Bluetooth” from the available drop down. You will see “Pro controller” available in the options. Select this and wait for Windows to setup the device.
If there are any issues when connecting via Bluetooth please ensure you have updated the firmware at www.gioteck.com/firmware and follow online guide.
If a password is required, please input 0000 or 12334.

Auto connect function

Whilst the controller is off, Press and hold the key, it will automatically connect back to the last connected device

Turbo function

For use with the following buttons: A, B, X, Y, L, ZL, R, ZR can use turbo functions

Press and hold the key that you want to set the turbo function, then press the key
If you want to disable the turbo key, follow the previous step
After the controller is turned off, the previously selected “turbo” button will be cancelled. If you wish to re-set the turbo mode, then you will need to repeat the initial step.

LED CONTROL

The controller features customisable LEDs. The default setting has the LEDs auto-cycle all colours.
To adjust the LED colours or turn LEDs off:

Check the controller is powered ON (see ‘pairing the controller’ section).
Ensure rear “Off/On” switch is set to the Off position.
Press the “set” button on the rear of the controller. Each press of the button advances the colour mode.
After cycling through all colours, the last setting is OFF.
Pressing the “set” button again when the LEDs are OFF will restart the cycle again.

PROGRAMMING THE CONTROLLER

Ensure rear “Off/On” switch is set to the “On” position.
Press and hold “Set” button for 3 seconds until the LED on the front of the controller flashes repeatedly.
Whilst the LED’s are flashing, press the chosen “command” button (such as “Y”) once.
Now press the chosen “function” button on the back of the controller once.
The LED will stop flashing, and this will have successfully mapped your chosen “command” button to the “function” button.
To remove the “command”, press and hold the “set” button for 6 seconds.

BATTERY POWER

When powered off: Plug in to charge. 4 LED’s will flash during charging process. All lights will be turned off after the controller is fully charged.
When connected: When the device is switched on, the LED’s will initially flash when charging and will remain permanently on to indicate when the controller is fully charged.
During low power: LED’s will flash to indicate low power.
If the controller has no power, it can take up to 2 minutes to charge enough to indicate normal charging is in progress

TURNING OFF THE CONTROLLER

Hold the home button for 5 seconds to manually turn the controller off.
When attempting to connect, if the controller fails to connect to a device within 30 seconds, it will automatically turn itself off
The controller will allow 60 seconds for BT pairing before requiring the process to be restarted.
If no keys are pressed within 5 minutes, the controller will turn itself off

COMMON PROBLEMS

Q: Why can’t | connect to the Switch™?
A: Please ensure your Switch™ is not in flight mode.
Q: Why can’t | connect via Bluetooth on my PC?
A: There may be an issue with your BT adapter. If this fails, please connect via USB cable.
Q: Why won’t my controller charge?
A: Please press and hold the small reset button on the back of the controller for 3 seconds.
Then give a full charge to the controller (2 hours). This should reset the battery.
Some games are designed specifically for the Joy-Cons and therefore rumble and motion control may not work using this controller.

TECHNICAL DATA

Design and specifications are subject to change without notice
USB Charging cable: 1.0m
Wireless Connection: Bluetooth 2.1+EDR
Battery type: Li-ion
Battery capacity: 550mAh
Charging hour: 2.5h
Play hour: 8h (this test base on non-Rumble, the channel light Strip light up)
Input power rating: DC5V/ 1A
Voltage: 5.0V +/-0.2eV
Operating temperature: -10 C—60C
Radiofrequency: ISM 2.4G
Frequency band: 2402—2480MHz(1MHz)
Maximum radio frequency: Odom
Mass: Approx. 167g

ATTENTION:

If you need support, please contact support@gioteck.com
Before using this product, carefully read this manual and any manuals for compatible hardware.
Retain these instructions for future reference.
If you are unable to satisfactorily resolve your issue with the retailer, please contact GBB through its email address support@gioteck.com or alternatively contact GBB directly at: GBB Ltd, Unit 19 Hither Green Industrial Estate, Clevedon, Somerset, BS21 6XU
Authorised Representative (EU}2019R1020: Authorised Representative Service 77 Camden Street Lower, Dublin, D02 XE80 Ireland
GBB warrants to the original consumer purchaser that the product will be free of defects in materials and/or workmanship for the length of time specified in the warrant period from the date of purchase, this being one (1) year. If a defect covered by this warranty occurs during the warranty period, GooodBetterBest at its option will repair or replace, at no charge, any part that GoodBetter- Best determines to be defective.
This warranty shall not apply if the product has been damaged by abuse, misuse, negligence, accident, modification, tampering or by any causes unrelated to defective materials and/or workmanship. Repair or replacement as provided under this warranty is Good Better Best exclusive prerogative. In order to obtain warranty services under certain circumstances (particularly when the retailer will not accept the return of the defective product), you may be required by GBB to return the product directly to GBB in the United Kingdom for inspection and evaluation, along with evidence of purchase (including the price paid and the date the item was purchased], for a determination of whether the warranty applies. IF you have been asked by GBB to return the product to GBB in the United Kingdom, and the product is defective and covered under the applicable warranty period, GBB shall provide the appropriate warranty services.
If the warranty does not apply (either due to misuse, damage, negligence etc, or because the warranty period has expired}, you may be charged to return the product to you (if you instruct us to do so). Any applicable implied warranties, including warranties or merchantability and fitness for a particular purpose, are hereby limited to the length of time specified in the warrant periods below, beginning from the date of purchase and are subject to the condition set forth in this limited warranty.
In no event shall GBB be accountable for incidental damages resulting from the breach of any express or implied warranties. You may have different or additional legal rights, including longer warranty periods, which vary from jurisdiction to jurisdiction. Some jurisdictions do not allow certain limitations on how long and implied warranty lasts, so the above limitations may not apply to you. In addition, consumers have the legal rights under applicable national legislation governing the sales of consumer goods. Such rights are not affected by the warranties set for herein, except to the extent allowed by law.
This product is covered by a one (1) year manufacturer warranty. For terms and conditions and for technical assistance please contact support@gioteck.com

Use and handling

Before use, check that there is plenty of space around you.
When using the controller, grip it firmly and make sure it cannot slip out of your hand.
If using a controller that is connected to the SWITCH system with a cable, make sure that the cable will not hit a person or object. Also take care to avoid pulling out the cable from the SWITCH system.

Exterior protection
Follow the instructions below to help prevent the product exterior from deteriorating or becoming discolored.

Do not place any rubber or vinyl materials on the product exterior for an extended period of time.
Use a soft, dry cloth to clean the product. Do not use solvents or other chemicals.
Do not wipe with a chemically-treated cleaning cloth.

Charging the controller
With the SWITCH system turned on or in rest mode, connect the controller to the console using the cable.

Battery life and duration

The battery has a limited lifespan. Battery duration will gradually decrease with repeated usage and age. Battery life also varies depending on the storage method, conditions of use and environmental factors.
Charge in an environment where the temperature range is between 10 C -30. Charging may not be as effective when performed in other environments.

When not in use

When the wireless controller is not used for an extended period of time, it is recommended that you fully charge it at least once a year to help maintain battery functionality.

When disposing of the wireless controller

The lithium-ion battery of the wireless controller is recyclable. When disposing of the wireless controller, remove the battery and follow local regulations regarding disposing of batteries.

Caution

Remove the battery in a location out of the reach of small children to help prevent accidental swallowing of small parts such as the screws.
Be careful not to hurt your nails or fingers when removing the controller casing.
For safety reasons, attach tape or a seal on the metal part of the battery before disposing.

NOTICE

Other than when disposing of the wireless controller, never remove the screws and never remove the battery from the wireless controller.

SAFETY

Do not handle damaged or leaking lithiumlon batteries.
If you come into contact with material from a leaking battery, take the following actions:
If the material gets into your eyes, do not rub, instead, immediately flush your eyes with clean water and seek medical attention.
If the material comes into contact with the skin or clothes, immediately rinse the affected area with clean water. Consult your physician if inflammation or soreness develops.
Avoid prolonged use of this product. Take a break at about 30-minute intervals.
Stop using this unit immediately if you begin to feel tired or if you experience discomfort or pain in your hands or arms during use. If the ondition persists consult a doctor.
This product is intended for use with your hands only, do not bring it into close contact with your head, face or the bones of any other part of the body.
The vibration function of this product can aggravate injuries, do not use the vibration function if you have any ailment or injury to the bones, joints, or muscles of your hands or arms. You can turn on or turn off the vibration function from (Settings) on the function screen.
Permanent hearing loss may occur if the headset or headphones are used at high volume. Set the volume to a safe level. Over time, increasingly loud audio may start to sound normal but can actually be damaging to your hearing. IF you experience ringing or any discomfort in your ears or muffled speech, stop listening and have your hearing checked. The louder the volume, the sooner your hearing could be affected. To protect your hearing:
Limit the amount of time you use headset or headphones at high volume.
Avoid raising the volume to block out noisy surroundings.
Lower the volume if you can’t hear people speaking near you.
Do not stare at the light on the controller when it is blinking, if you experience discomfort or pain anywhere in or on your body from light stimulation, stop using immediately.
Never disassemble or modify the product.
Do not expose the product to high temperatures, high humidity or direct sunlight.
Do not allow the product to come into contact with liquids.
Do not put heavy objects on the product.
Do not throw or drop the product or subject it to strong physical shock.
Do not touch the ports or insert any foreign objects into them.

Good better best Ltd hereby declares that this product is in compliance with the essential requirements and other provisions of Directive 2014/30/EU (EMC) & 2014/53/EU (RED).

This product should NOT be disposed of in normal household waste. It should be disposed of separately.Please take it to an electrical waste collection point.

For help with the set-up or operation of this product please
go to: SUPPORT@GIOTECK.COM

FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement.