LAMONA LAM6703 Integrated White Larder Fridge Instruction Manual

LAMONA LAM6703 Integrated White Larder Fridge

Product Information

Specifications:

• Product Name: Lamona Tall Integrated Larder Fridge
• Model Number: LAM6703
• Type: Frost Free
• Product Name: Lamona Tall Integrated Frost Free Freezer
• Model Number: LAM6803

Product Usage Instructions

Installation Instructions:
Ensure safe fitting and use of the appliance by a suitably competent and qualified person. Keep instructions for future reference. Avoid suffocation by keeping packaging material away from children.

Safety Information:

• Always use a two-person lift when handling the appliance.
• Securely fix and level the appliance.
• Do not install a damaged appliance.
• Beware of metal edges and use gloves when handling.
• Do not use extension cables/adapters.

Installation Overview Guide:

1. Establish power socket location for accessibility.
2. Prepare the cabinet by removing back panels, fitting upper shelf, and plinth vent.
3. Fit and adjust decor doors.
4. If necessary, reverse appliance door.
5. Fit side seal trim and top trim to the appliance.
6. Protect cabinet edges with masking tape.
7. Lift appliance into the cabinet and align using adjustable feet and spacer brackets.
8. Fix spacer brackets to the appliance and screw to cabinet sides.
9. Make final adjustments to align the appliance to brackets and ensure correct spacing depths.
10. Tighten appliance brackets, do not over tighten, and refit appliance door.
11. Attach door sliders, remove bracket spacer tabs, and install cover caps and trims.

Tools Required:

• 2mm drill bit
• TORX25 and cross head screwdriver
• Avoid using high-speed impact power tools.

FAQ

• Can I use extension cables with the appliance?
  No, it is not recommended to use extension cables or adapters with the appliance.

• What should I do if the appliance door does not close fully?
  Ensure the appliance is installed at a depth of 42mm using brackets with tabs. Incorrect installation depth may cause issues such as the light staying on, alarms sounding (for frost-free models), or the appliance not working correctly.

Generic instructions, (To be used in conjunction with User Instructions).

• Please read this Installation Manual to ensure safe fitting and use of the appliance.
• The appliance should be fitted by a suitably competent and qualified person.
• Please keep these instructions in a safe place for future reference.
• Danger of suffocation keep packaging material away from children.

Safety Information

Throughout this manual the following symbols are used.

Installation overview guide$

• Please use brackets with tabs to ensure appliance install depth is 42mm. (Use front feet adjustment to assist)
• If installed deeper than 42mm (at either side) the appliance door may not close fully causing issues such as:-
  THE LIGHT WILL STAY ON THE ALARM WILL SOUND (*Frost free models) THE APPLIANCE WILL NOT WORK CORRECTLY (Not cooling, icing-up, water leaking etc.)

Tools required

Installation

Parts supplied – PLEASE RETAIN, DO NOT THROW AWAY!

Remove parts bag from appliance drawer

Cabinet pre-build and airflow

THE CABINET WILL NEED MODIFYING BEFORE INSTALLING YOUR APPLIANCE.

1. Remove rear panels.
2. Attach feet.
3. Fit and align doors.
4. Fit upper shelf.

Fit side seal trim

1. Cut side seal to length, 1710mm.
2. Apply seal 30mm from top edge of the appliance, removing backing tape as you progress.

Fit top trim, (BAG 1)

1. Cut indicated 3mm off each end of the top trim and chamfer inwards.
2. lign the top trim to the non hinge side of the appliance and fix.

Inserting into cabinet

1. Protect areas * with masking tape.
2. Carefully lift the appliance.
3. Place rear feet onto cabinet base.
4. Level and gently slide into position.

Remove appliance door and level

1. Support door 1 , remove inner screw 2 , rotate hinge upward 3 , remove door 4 , (Careful not to damage door and fittings).
2. Position the appliance c.40mm back from cabinet front edge.
3. Turn adjustable feet so that the appliance stands vertically true in the cabinet and the top trim aligns with the upper fascia infill.

Securing the appliance (Vertically true and level in cabinet.)

1. Spacer brackets will set the appliance to the correct depth 42mm. Adjust feet and appliance to achieve correct alignment.

2. Non hinge side spacer brackets, (top and bottom). DO NOT fully tighten.
   

3. Hinge side spacer brackets, (top and bottom). DO NOT fully tighten.
   

4. Once spacing is correct at all four corners, fully secure brackets to cabinet sides. Carefully snap off the distance spacing tabs, (use knife to trim or pre-score).
   

Refit appliance door (Take care not to damage the appliance.)

1. Remove top hinge side spacer bracket. Keep in a safe place.
2. Remove inner screw from the top hinge.
3. Rotate hinge upwards.
4. Replace the plastic washer 1 , appliance door 2 . Refit the top hinge and spacer bracket 3 .

Profile Kitchen – Bracket modification

1. Position appliance 42mm from front edge of cabinet.
2. Drill bracket so screw fixing is angled into cabinet.

Door slider fitting, (BAG 4)
Door reversal and slider fixing

• Punch or pilot drill the pre-marked holes on the fridge freezer door.
• Remove and fix the slider retainers to opposite side of the doors.

1. Locate slider and align with decor door edge, (the tab on the slider gives the correct distance of 21mm).
2. Mark, pilot and fix slider to decor door.
3. Carefully snap off distance spacing tabs. Add cover trims, (use knife to trim or pre-score).
   Note: If refrigerator door doesn’t close fully a spacer will need to be placed behind the decor door slider to ensure correct closure.

Bracket trims

1. Insert cover trims over screw holes, (BAG 2). Clip centre in first then the ends.
2. Insert cover trims over screw holes, (BAG 3).
3. Present hinge covers at 45°, then rotate to fit over the appliance door hinges, (BAG 5).

Plinth vent
Fit a plinth vent for good airflow, see Kitchen Installation Manual for fitting instructions.

Reverse door opening (if desired)

1. Remove plastic cover caps and plug. (DO NOT remove magnet from top of door).
2. Remove hinge 1 , door 2 and hinge 3 .
3. Fit hinge 1 in new position 4 and place washer.
4. Fit door 2 .
5. Fit hinge 3 in new position 5 .

References

• Howdens | The UK's Number 1 Trade Kitchen Supplier
• Register an Appliance | Aftersales | Howdens
• Que Faire de mes Déchets ? Découvrez les solutions pour tous vos déchets et nos conseils pour en produire moins.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>