LAMONA LAM8676 Built In Dishwasher Instruction Manual
- June 13, 2024
- Lamona
Table of Contents
- LAMONA LAM8676 Built In Dishwasher
- Product Information
- Product Usage Instructions
- Safety Information
- Tools required
- Installation
- Dimensions
- $Dishwasher connections
- Fit feet and raise to 10-15mm below worktop height
- Profile kitchen
- Positioning the dishwasher
- Remove ‘H’ frame for frontal fitting
- Standard decor door preparation
- Decor drawer frontals preparation
- Final adjustment and secure dishwasher
- Documents / Resources
LAMONA LAM8676 Built In Dishwasher
Product Information
- The Built-In Dishwasher model numbers are LAM8676 and LAM8607.
- These dishwashers are designed to be installed in a kitchen cabinet and offer convenient and efficient dishwashing capabilities.
- The dishwashers come with a range of safety features to ensure safe usage and installation.
- The user manual provides detailed instructions on how to install and operate the dishwasher.
Product Usage Instructions
- Before installing the dishwasher, read the Installation Manual provided to ensure safe fitting and use of the appliance.
- The appliance should be fitted by a suitably competent and qualified person.
- Keep the installation instructions in a safe place for future reference.
- To prevent suffocation, keep packaging material away from children.
- Ensure you have a two-person lift when handling the dishwasher as it can be heavy.
- Fix the dishwasher securely and level to avoid any accidents.
- Beware of sharp metal edges and use gloves when handling the dishwasher to prevent injuries.
- Do not install a damaged machine. Check for any damage before installation.
- Remove all packing and transit protectors from the appliance before positioning it.
- Avoid moving the appliance by the door to prevent damage.
- Take care of the surrounding area when moving the appliance to prevent damage to flooring, wall coverings, and pipes.
- Be aware of the instability of the appliance before fitting it into position.
- Do not leave the dishwasher door open to avoid tripping hazards.
- If the electricity cable is damaged, it must be replaced by a competent person.
- If an error code is displayed after installation or during the first use, do not kink hoses behind the machine. Check hoses for any kinks.
- Ensure a proper electrical connection to avoid the risk of fire and electric shock.
- Connect the dishwasher to a cold water supply for proper functioning.
- Refer to the installation overview guide in the manual for detailed steps on dimensions, dishwasher connections, fitting feet, positioning, and adjusting the dishwasher.
- Use the required tools mentioned in the manual, such as a 10mm open-ended spanner, Torx head, flat head, and Phillips head screwdrivers.
- Follow the provided instructions and diagrams to install the dishwasher correctly.
Please note that these usage instructions are a summary. For detailed instructions and safety information, refer to the complete user manual provided with the product.
- Generic instructions, (To be used in conjunction with User Instructions).
- Please read this Installation Manual to ensure safe fitting and use of the appliance.
- The appliance should be fitted by a suitably competent and qualified person.
- Please keep these instructions in a safe place for future reference.
- Danger of suffocation keep packaging material away from children.
Safety Information
Throughout this manual the following symbols are used:
Electrical connection
- WARNING! Risk of fire and electric shock.
- The appliance must be earthed.
- Make sure that the electrical information on the rating plate agrees with the power supply. If not, contact an electrician.
- Do not use multi-plug adapters and extension cables.
- Avoid damage to the mains plug and mains cable. Should the mains cable need to be replaced, contact a LAMONA Authorised Service Agent or a suitably qualified person.
- Connect the mains plug only at the end of the installation. Ensure access to the mains plug after the installation.
- This appliance complies with all relevant E.U. Directives.
- The appliance has a 13amp plug.
- Use fuse: 13amp ASTA (BS 1362).
Water connection (cold water supply)
- Do not kink or damage the hoses during installation.
- Before you connect the fill hose to the appliance; let some water flow through to ensure all debris is removed.
- We suggest you connect the fill hose and open the water valve before pushing the appliance into position.
- Check for leaks during and after installation and after first use.
- If the water inlet hose is damaged, immediately close the water supply valve and disconnect the mains plug from the mains socket.
- The appliance is to be connected to the water mains using the new hose-set supplied with the appliance. Do not re-use old hose-sets.
Tools required
Installation
Parts supplied
Dimensions
- Position the dishwasher relative to service connections.
- For Profile Kitchens, see section 4.
$Dishwasher connections
- All dimensions are to the floor.
- DO NOT insert the hose too deep into the waste pipe,(Maximum hose length, 3.2 metres).
- NOTE: Ensure hoses are not kinked or trapped behind the dishwasher.
- NOTE: If necessary loosen and rotate the water hose towards the water supply and re-tighten. (Always use the new hose supplied with the dishwasher).
- Ensure cap/end is removed from waste pipe spigot.
- NOTE: Issues with hoses or drain will cause machine to malfunction.
- Ensure water is turned on and the isolator valve is accessible after fitting.
- Hose connection – 3/4”.
- Cold water pressure – 0.1 – 1Mpa (0.3 – 1.0 Bar)
- WARNING! This appliance must be earthed. (Socket must be accessible after fitting).
- WARNING! Do not use extension cables / adapters.
- Incorrect waste pipe configuration.
- Correct waste pipe configuration to avoid water flow from the sink to dishwasher
Fit feet and raise to 10-15mm below worktop height
- For standard installation, extension feet need to be fitted.
Profile kitchen
- Pre-install an infill when fitting a dishwasher into a Profile Kitchen.
Protection strip for timber worktops to avoid condensation damage
- NOTE: This strip must be fitted to timber worktops to avoid damage. Ensure protection strip is set to edge of square edged worktops.
- Ensure a clean and dust free surface.
- Cut to fit.
Positioning the dishwasher
Adjust feet and raise dishwasher to underside of worktop (level).
- It is critical that the dishwasher is installed level.
Remove ‘H’ frame for frontal fitting
Standard decor door preparation
Decor drawer frontals preparation
Fit decor door / decor drawer frontals
- DO NOT use hole 1, especially when fitting an integrated handle decor door. ****
Fixing for standard decor door
Phillips head 42mm numbers 3 and 6.
Fixing for decor drawer frontals
- Phillips head 42mm numbers 3, 4 and 6.
- If necessary make final alignment and fully tighten the screws.
- Make sure screws are fastened flush. DO NOT over-tighten.
Final adjustment and secure dishwasher
- It is critical that the dishwasher is installed level.
- Side fixing method for dishwashers
Securing screws x4 positions
Do not overtighten
- Maximum 600mm (+1)
- Adjust the spacer to fill the gap between the dishwasher and the cabinet
- Do not bow dishwasher sides. Make sure the spacer is bridging any gap between the appliance and the cabinet.
Fit plinth
Once decor door / decor drawer frontals are fitted correctly, fit the plinth.
Final checks:
- Decor door opens and closes without clash?
- Dishwasher installed level
- Front Rear,
- Side Side?
- Hoses not kinked?
Switch on water and electric
- Run a programme cycle to confirm successful installation and that there are no leaks.
- www.howdens.com
- Product serial number (Place sticker here)
- Product information correct at the time of publication in October 2023.
- The company has a policy of continuous product development and reserves the right to change any products and specifications given in this manual.
- Subject to the Terms and Conditions of Trading, a copy of the Howdens Terms and Conditions is available upon request.
- Copyright © 2023 Howden Joinery Ltd. All rights reserved.
- www.howdens.com/appliance-registration
Documents / Resources
|
LAMONA LAM8676 Built In
Dishwasher
[pdf] Instruction Manual
LAM8676 Built In Dishwasher, LAM8676, Built In Dishwasher, In Dishwasher
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>