LAMONA LAM6352 Integrated Fridge and Freezer Instruction Manual Product Information
- June 1, 2024
- Lamona
Table of Contents
LAM6352 Integrated Fridge and Freezer
“`html
Product Information
Specifications
-
Compatible with 50:50, 70:30 & Full height
fridge/freezers -
Distance: 21mm
-
Screw Size: 3.9 x 13mm x 8
Product Usage Instructions
-
Unscrew and remove old sliders from the door.
-
Locate the new slider into the retainer and align it with the
correct distance of 21mm. -
Fix the slider to the decor door securely.
-
Carefully snap off the distance spacing tabs as needed.
-
Use the provided 3.9 x 13mm screws to secure the slider in
place. -
Open and close the doors to ensure correct function, adding
cover trims if necessary.
FAQ
Q: Can I use power tools to fit the sliders?
A: No, do not use power tools to fit the sliders. It is
recommended to install them manually.
Q: Do I need to replace all sliders even if some are not
broken?
A: Yes, it is advised to remove and replace all slides on the
door for consistent performance.
Q: What should I do if I encounter issues with door
functionality after replacement?
A: Ensure that the sliders are correctly aligned and securely
fixed. Check for any obstructions that may impede proper door
movement.
“`
Door slide replacement
Door slide replacement
This leaflet is for all 50:50, 70:30 & Full height fridge/freezers
Remove and replace all slides on the door, even if some are not broken.
!
Do not use power tools to fit the sliders Replace each slider one at a time, for ease of fitting
1
Unscrew and remove old sliders.
2
Locate slider into the retainer and align with
décor door edge, (the tab on the slider
gives the correct distance of 21mm).
21mm
4 Positions
3
Fix slider to decor door.
4
Carefully snap off the distance spacing tabs.
4 Positions
5
3.9 x 13mm x8 Screws
Open / close doors checking for correct function. Add cover trims.
!
4 Positions
HD321091
4 Positions