MeanWell HRP-300N 300W Single Output Type AC/DC Power Supply Specifications Manual
- June 2, 2024
- MeanWell
Table of Contents
300W Single Output with PFC Function
HRP-300N series
Features
- Universal AC input / Full range
- Built-in active PFC function, PF >0.95
- 200% peak power capability
- High efficiency of up to 89%
- Withstand 300VAC surge input for 5 seconds
- Protections: Short circuit / Overload / Over voltage / Over temperature
- 1U low profile 41 mm
- Built-in cooling fan NO-OFF control
- Built-in DC OK signal
- Built-in remote sense function
- 5 years warranty
Application
- Industrial automation machinery
- Industrial control system
- Mechanical and electrical equipment
- Diagnostic or biological facilities
- Test or measurement systems
- Telecommunication equipment
Description
HRP-300N is a 300W single-output type AC/DC power supply. This series operates for 85~264VAC input voltage and offers the models with the DC output mostly demanded from the industry. Each model is cooled by the built-in fan with fan NO-OFF control, working for a temperature up to 70’C. Moreover, HRP-300N provides 200% short-duration peak power for motor applications and electromechanical loads requiring much higher power during start-up.
Model Encoding
SPECIFICATION
Function Manual
- Remote Sense
The remote sensing compensates voltage drop on the load wiring up to 0.5V.
2. D.C-OK Signal
DC-OK Signal is a TTL level signal. High when PSU turns on.
3. Peak Power
Mechanical Specification
Installation Manual
Please refer to: http://www.meanwell.com/manual.html
MeanWell HRP-300N 300W Single Output Type AC/DC Power Supply Specifications
Manual – Optimized PDF
MeanWell HRP-300N 300W Single Output Type AC/DC Power Supply Specifications
Manual – Original PDF