MEANWELL RPS-60-12 60W Reliable Green Medical Power Supply Instruction Manual

June 13, 2024
MeanWell

60W Reliable Green Medical Power Supply
R P S – 6 0series

RPS-60-12 60W Reliable Green Medical Power Supply

MEANWELL RPS-60-12 60W Reliable Green Medical Power
Supplyhttps://www.meanwell.com/Upload/PDF/Medical_EN.pdfMEANWELL
RPS-60-12 60W Reliable Green Medical Power Supply - icon
1

Features

  • 4″%x2″ compact size
  • IT & Medical safety approved (2 x MOPP) according to ANSI/AAMI ES60601-1, IEC/BS EN/EN60601-1 and IEC/BS EN/EN/UL 62368-1
  • Suitable for BF application with appropriate system consideration
  • Cooling by free air convection
  • EMI class B forclass I configuration
  • No load power consumption<0.75W
  • Protections: Short circuit / Overload / Over voltage
  • Operating altitude up to 3000 meters
  • 3 years warranty

Applications

  • Oralirrigator
  • Hemodialysis machine
  • Medical computer monitors
  • Sleep apnea devices

GTIN CODE

MW Search: https://www.meanwell.com/serviceGTIN.aspx

Description

RPS-60is a 60W highly reliable green PCB type medical power supply with a high power density on the 4” by 2” footprint. It accepts 90~264VAC input and offers various output voltages between 3.3V and 48V. The working efficiency is up to 86% and the extremely low no load power consumption is down below 0.75W. RPS-60 is able to be used for Class I (with FG) system design. The extremely low leakage current isless than 130xA. In addition, it conforms to international IT and medical regulations (2*MOPP) and EMC BS EN/EN55022/BS EN/EN55011, perfectly fitting all kinds of BF rated “patient contact” medical system equipment.

Model Encoding

MEANWELL RPS-60-12 60W Reliable Green Medical Power Supply -
Encoding

SPECIFICATION

MODEL RPS-60-3.3 RPS-60-S RPS-60-12 RPS-60-15 RPS-66-24 RPS-60-48
OUTPUT DC VOLTAGE 3.3V 5V 12V 15V 24V
RATED CURRENT 10A 10A 5A 4A 2.5A 1.25A
CURRENT RANGE 0 ~ 11A 0 ~ 11A 0 ~5.5A 0 ~ 4.4A 0 ~ 2.75A 0~ 1.375A
RATED POWER 33W 50W 60W 60W 60W 60W
PEAK LOAD(10sec.) Note.2 36.3W 55W 66W 66W 66W 66W
RIPPLE & NOISE (max.) Note.3 60mVp-p 60mVp-p 60mVp-p lOOmVp-p lOOmVp-p

lOOmVp-p
VOLTAGE ADJ. RANGE| 3.1~ 3.6V| 4.75 ~ 5.5V| 11.4 ~13.2V| 13.5 ~ 16.5V| 22.8~ 27.6V| 45.6 ~ 52.8V
VOLTAGE TOLERANCE NoteA| ±2.0%| ±2.0%| ±2.0%| ±2.0%| ±1.0%| ±1.0%
LINE REGULATION| ±0.5%| ±0.5%| ±0.5%| ±0.5%| ±0.5%| ±0.5%
LOAD REGULATION| ±1.0%| ±1.0%| ±1.0%| ±1.0%| ±1.0%| ±1.0%
SETUP, RISE TIME| 500ms, 30ms/230VAC 500ms, 30ms/115VAC at full load
HOLD UP TIME (Typ.)| 60ms/230VAC 12ms/115VAC at ful load
INPUT| VOLTAGE RANGE| 90 ~ 264VAC 127 ~ 370VDC
FREQUENCY RANGE| 47 ~ 63Hz
EFFICIENCY (Typ.)| 74%| I79%| 184%| 185%| 187%| 186%
AC CURRENT (Typ.)| 1.8A/115VAC 1 N230VAC
INRUSH CURRENT (Typ.)| COLD START 60A/230VAC 30A1115VAC
LEAKAGE CURRENT(max.)Note.5| Earth leakage current < 1300/264VAC , Touch current <1001/N264VAC
PROTECTION| OVER LOAD| 115 -150% rated output power
Protection type : hiccup mode, recovers automaticaly after fault condition is removed
OVER VOLTAGE| 3.8 ~ 5V| I 5.7 ~6.8V| 1 13.8~16.2V| 1 17.2 ~ 20.3V| 1 28.4 ~ 32.4V| 1 55.2 ~ 64.8V
Protection type : Shutdown oft) voltage, re-power on to recover
EIMROINENI| WORKING TEMP.| -20 ~+70°C (Refer to “Derating Curve)
WORKING HUMIDITY| 20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY| -40 ~+85°C , 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT| ± 0.03%f C (0 ~ 50° 0)
VIBRATION| 10 ~ 500Hz, 2G 10mini1cycle, period for 60min. each along X, Y, Z axes
OPERATING ALTITUDE Motel.| 3000 meters
SAFETY &
EMC (Note8)| SAFETY STANDARDS| I EC,62368-1, U L62368-1, TUV BS EN/EN62368-1, IEC60601-1, TUV BS EN/EN60601-1, UL ANSI /AAMI ES60601-1 (3.1 version), CAN/CSA-C22.2 No. 60601-1:14 – Edition 3, EAC TP TC 004 approved; Design refer to BS EN/EN60335-1
ISOLATION LEVEL| Primary-Secondary: 2xMOPP, Prinary-Earth:lxMOPP, Secondary- Earth:lxMOPP
WITHSTAND VOLTAGE| I/P-0/P:4KVAC I/P-FG2KVAC 0/P-FG;1.5KVAC
ISOLATION RESISTANCE| I/P-0/P, I/P-FG, 0/P-FG:100M Ohms /500VDC/25°C/70% RH
EMC EMISSION| Parameter| Standard| Test Level / Note
Conducted emission| BS EN/EN55011(CISPR11)| Class B
Radiated emission| BS EN/EN55011 (CISPR11)| Class B
Harmonic current| BS EWE N61000-3-2| Class A
Voltage flicker| BS EWE N61000-3-3| —-
EMC IMMUNRY| BS EN/E1455035 . BS EN/EN60601-1-2
Parameter| Standard| Test Level / Note
ESD| BS EWE N61000-4-2| Level 4, 15KV air ; Level 4, 8KV contact
RF field susceptibility| BS EWE N61000-4-3| Level 3, 10V/m(80MEtz-2.7GHz ) Table 9, 9-28V1m( 385MHz-5.78GEtz )
EFT bursts| BS EWEN61000-4-4| Level 3, 2KV
Surge susceptibility| BS EWE N61000-4-5| Level 4, 4KV/Line-FG; 2KV/Line-Line
Conducted susceptibility| BS EWE N61000.4-6| Level 3,10V
Magnetic field immunity| BS EWE N61000-4-8| Level 4, 30A/m
Voltage dip, interruption| BS EWE N61000-4-11| 100% dip 1 pLOods.30%dip25periods, 1CO% int nwices 250 periods
OTHERS| MTBF| 5153.0K hrs min. Telcordia SR-332 (Bellcore) ; 353.6K hrs min. MIL-HDBK-217F (25t )
DIMENSION (1.11rH)| 101.6’50.8’29mm or 4″ 2″ 1.141″ inch
PACKING| 0.15Kg;96pcs/15.4Kg/0.89CUFT
NOTE| 1.All parameters NOT speda h/ mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
2.33% Duty cyde maximum within every 30 seconds. Average output power should not exceed the rated power.
3.Ripple & noise are measured at 20MHz of bandwidth by using a lr twisted pair-wire terminated with a 0.14 & 47pf parallel capacibr.
4.Tolerance : includes set up tolerance, line regulation and load regulation.
5.Touch current was measured from primary input to DC Output.
6.The ambient temperature derating of 3.5.01000m with fanless models and of 5t /1000m with fan models for operating altitude higher than 200006500ff)
7.Heat Sink HS1,HS2 can not be shorted.
8.The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm’360mm metal plate with lmm of thickness. The final equipment must be re- confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to -EMI testing of component power supplies.”(as available on http://www.meanwell.com)
※ Product Liability Disdaimer : For detailed information, please refer to https://www.meanwell.00miserviceDisclaimeraspx

Block Diagram

MEANWELL RPS-60-12 60W Reliable Green Medical Power Supply -
Diagram

Output Derating

MEANWELL RPS-60-12 60W Reliable Green Medical Power Supply -
Diagram1

Output Derating VS Input Voltage

MEANWELL RPS-60-12 60W Reliable Green Medical Power Supply -
Diagram2

Mechanical Specification

MEANWELL RPS-60-12 60W Reliable Green Medical Power Supply -
Diagram3AC Input Connector (CN1) : JST B3P-VH or equivalent

Pin No. Assignment Mating Housing Terminal
1 AC/N JST VHR or equivalent JST SVH-21T-P1.1 or equivalent
2 No Pin
3 AC/L

DC Output Connector (CN2) : JST B4P-VH or equivalent

Pin No. Assignment Mating Housing Terminal
1,2 +V JST VHR
or equivalent JST SVH-21T-P1.1

or equivalent
3,4| -V

: Grounding Required
1.HS1,HS2 cannot be shorted.
2.M1 is safety ground. For better EMC performance,
Please secure an electrical connection between
M1,M2 and chassis grounding.
Installation Manual
Please refer to : http://www.meanwell.com/manual.html

File Name:RPS-60-SPEC 2022-09-20
Downloaded from Arrow.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals