MEANWELL IRM-30 Series 30W AC DC PCB Mount Green Power Module Owner’s Manual

: June 1, 2024
: MeanWell

Table of Contents

MEANWELL IRM-30 Series 30W AC DC PCB Mount Green Power Module
Features
Application
Description
Model Encoding
SPECIFICATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MEANWELL IRM-30 Series 30W AC DC PCB Mount Green Power Module

Features

MEANWELL-IRM-30-Series-30W-AC-DC-PCB-Mount-Green-Power-Module-
FIG-7

2.74″x1.54″compact size
PCB, chassis or screw terminal mounting version
Universal input 85~305VAC
No load power consumption<0.1 W
EMI Class B without additional components
Wide operating temp. range -30~70 C
Protections: Short circuit / Overload / Over voltage
Cooling by free air convection
Isolation Class II
Overvoltage category III
Pass LPS(except for 5V)
3 years warranty

Application

Industrial electrical equipment
Mechanical equipment
Factory automation equipment
Hand-held electronic device

GTIN CODE
MW Search: https://www.meanwell.com/serviceGTIN.aspx

Description

IRM-30 is a 30W miniature (69.53924mm) AC-DC module-type power supply, ready to be soldered onto the PCB boards of various kinds of electronic instruments or industrial automation equipment. This product allows the universal input voltage range of 85~305VAC. The 94V-0 flame retardant plastic case and potted with silicone enhance heat dissipation. PCB mounting style model(Blank) meets the anti-vibration demand of up to 2G and the screw terminal style model (ST) meet the anti-vibration demand up to 5G; moreover, it provides fundamental resistance to dust and moisture. With high efficiency up to 90% and extremely low no-load power consumption below 0.1W, the IRM-30 series fulfills the worldwide regulation for the low power consumption requirement for electronics. The entireseries is a Class Il design (no FG pin), incorporating the built-in EMI filtering components, enabling compliance with BS EN/EN55032 Class B; the supreme EMC features to keep the end electronic units from electromagnetic interference. In addition to module-type model, IRM-30 series also offers the screw terminal style model (ST) .BS EN/

Model Encoding

MEANWELL-IRM-30-Series-30W-AC-DC-PCB-Mount-Green-Power-Module-
FIG-1

SPECIFICATION

MODEL| IRM-30-5| IRM-30-12| IRM-30-15| IRM-30-24| IRM-30-48
---|---|---|---|---|---

OUTPUT

| DC VOLTAGE| 5V| 12V| 15V| 24V| 48V
RATED CURRENT| 6A| 2.5A| 2A| 1.3A| 0.63A
CURRENT RANGE| 0 ~ 6A| 0 ~ 2.5A| 0 ~ 2A| 0 ~ 1.3A| 0 ~ 0.63A
RATED POWER| 30W| 30W| 30W| 31.2W| 30.2W
RIPPLE & NOISE (max.) **Note.2| 120mVp-p| 150mVp-p| 200mVp-p| 240mVp-p| 300mVp-p
VOLTAGE TOLERANCE Note.3| ±2.5%| ±2.5%| ±2.5%| ±2.5%| ±2.5%
LINE REGULATION| ±0.5%| ±0.5%| ±0.5%| ±0.5%| ±0.5%
LOAD REGULATION| ±1.0%| ±0.5%| ±0.5%| ±0.5%| ±0.5%
SETUP, RISE TIME| 1000ms, 30ms/230VAC 1500ms, 30ms/115VAC at full load
HOLD UP TIME (Typ.)**| 40ms/230VAC 12ms/115VAC at full load

INPUT

PROTECTION

| ****

OVERLOAD

| 105% ~ 160% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed

OVER VOLTAGE

| 5.25 ~ 6.75V| 12.6 ~ 16.2V| 15.75 ~ 20.25V| 25.2 ~ 32.4V| 50.4 ~ 64V
Protection type : Shut off o/p voltage, clamping by zener diode

ENVIRONMENT

VIBRATION

| Blank:10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
ST:10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes
SOLDERING TEMPERATURE| Wave soldering: 265℃,5s (max.); Manual soldering: 390℃,3s (max.)
OVERVOLTAGE CATEGORY| Ⅲ; According to EN62368-1;altitude up to 2000 meters
OPERATING ALTITUDE Note.4| 2000 meters

SAFETY &

EMC

(Note.5)

| SAFETY STANDARDS| IEC62368-1, UL62368-1, TUV BS EN/EN62368-1, BS EN/EN60335-1, EAC TP TC 004, BSMI CNS14336-1 approved
WITHSTAND VOLTAGE| I/P-O/P:4KVAC
ISOLATION RESISTANCE| I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH

EMC EMISSION

EMC IMMUNITY

＞95% interruptions 250 periods

OTHERS

| MTBF| 7713.0K hrs min. Telcordia SR-332 (Bellcore) ; 593.4K hrs min. MIL-HDBK-217F (25℃)
DIMENSION| PCB mounting style : 69.53924mm (LWH) Screw terminal style : 9139.528.5mm (LWH)
PACKING| PCB mounting style : 0.094Kg;144pcs/14.5Kg/0.94CUFT Screw terminal style :0.113Kg;120pcs/14.6Kg/0.83CUFT
NOTE| 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1μF & 47μF parallel capacitor.

3. Tolerance: includes set up tolerance, line regulation and load regulation.

4. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitudes higher than 2000m(6500ft).

5. The power supply is considered as an independent unit , but the final equipment still needs to confirm that the whole system complies with the EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”

(as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf )

※ Product Liability Disclaimer： For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx

Block Diagram

MEANWELL-IRM-30-Series-30W-AC-DC-PCB-Mount-Green-Power-Module-
FIG-2