Breville The Mini Wizz BFP100 Food Processor Instruction Manual

: June 2, 2024
: Breville

the Mini Wizz Instruction Booklet

BREVILLE RECOMMENDS SAFETY FIRST

At Breville we are very safety conscious. We design and manufacture consumer products with the safety of you, our valued customer, foremost in mind. In addition we ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions.

IMPORTANT SAFEGUARDS

READ ALL INSTRUCTIONS BEFORE USE AND SAVE FOR FUTURE REFERENCE.

Carefully read all instructions before operating and save for future reference.
Remove any packaging material and promotional stickers before using the Mini Wizz for the first time.
Do not place the Mini Wizz near the edge of a bench or table during operation. Ensure the surface is level, clean and free of water, flour, etc.
Do not place the Mini Wizz on or near a hot gas or electric burner, or where it could touch a heated oven.
Handle the Mini Wizz and attachments with care – remember the blade is very sharp and should be kept out of reach of children.
Always make sure the Mini Wizz is completely assembled before operating. The appliance will not operate unless properly assembled.
Ensure the Mini Wizz is turned off at the ON/OFF switch, the power is switched off at the power outlet and the cord is unplugged from the power outlet before attaching the blade, whisk or processing lid.
Always secure the processing bowl onto the motor base before attaching the blade or whisk.
Always operate the Mini Wizz with the processing lid in position.
Do not use attachments other than those provided with the Mini Wizz.
Do not attempt to operate the Mini Wizz by any method other than those described in this booklet.
Do not process or pour hot liquids into the processing bowl as hot liquid may be ejected out of the appliance due to a sudden steaming. Allow liquids to cool before placing into the processing bowl.
Do not operate the appliance continuously on heavy loads for more than 1 minute. Allow the motor to rest for 10 minutes after each 1 minute of operation. None of the recipes in this manual are considered a heavy load.
Do not operate the appliance with a heavy load.
Do not run the motor without food in the bowl.
Always ensure the Mini Wizz is turned off at the ON/OFF switch, the power is switched off at the power outlet and the cord is unplugged from the power outlet before attempting to move the appliance, when not in use, if left unattended and before disassembling, cleaning or storing.
Do not use the Mini Wizz on uneven metal surfaces, for example a sink drain board.
To protect against electric shock do not immerse the motor base cord or power plug in water or any other liquid.
Do not move the Mini Wizz during operation.
Do not leave the Mini Wizz unattended when in use.
Keep the appliance clean. Follow the cleaning instructions provided in this book.
The processing blades are extremely sharp. Take extra care when handling the blades, emptying the bowl or cleaning the blades.

IMPORTANT SAFEGUARDS FOR ALL ELECTRICAL APPLIANCES

Unwind the power cord fully before use. • Do not let the power cord hang over the edge of a table counter, touch hot surfaces or become knotted.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure they do not play with the appliance.
It is recommended to regularly inspect the appliance. Do not use the appliance if power supply cord, plug or appliance becomes damaged in any way. Return the entire appliance to the nearest authorised Breville Service Centre for examination and/or repair.
Any maintenance other than cleaning should be performed at an authorised Breville Service Centre.
This appliance is for household use only. Do not use this appliance for anything other than its intended use. Do not use in moving vehicles or boats. Do not use outdoors.
The installation of a residual current device (safety switch) is recommended to provide additional safety protection when using electrical appliances. It is advisable that a safety switch with a rated residual operating current not exceeding 30mA be installed in the electrical circuit supplying the appliance. See your electrician for professional advice.

KNOW your Breville Mini Wizz

KNOW YOUR BREVILLE MINI WIZZ

A. Release lever
B. Lid for processing bowl with drop holes for emulsion.
C. 500ml processing bowl for use with chopping/mixing blade or whisk attachment.
D. ON/OFF switch
E. Stainless steel universal chopping/ mixing blade
F. Release button
G. 3 speed soft touch control CHOP, WHISK, GRIND.
H. 250 watt motor for high speed processing.

NOT SHOWN
Cord wrap facility (under the motor base)
ACCESSORIES
Storage Lid
Whisk attachment

HOW TO OPERATE YOUR BREVILLE MINI WIZZ

Before using your Breville Mini Wizz, remove all packaging materials and promotional materials, being careful when handling the blade, as it is very sharp. Wash the bowl, lid and other attachments in warm, soapy water.

CHOPPING, GRINDING AND WHISKING

CHOP function button – use for pulsing and rapid chopping/mixing with the chopping/mixing blade rotating clockwise.
GRIND function button – use for pulsing and rapid grinding with the
chopping/mixing blade rotating anticlockwise.
WHISK function button – use for whisking and blending with the whisk attachment rotating anti-clockwise.

Place the motor base on a dry, level surface. Ensure the Mini Wizz is turned off at the ON/OFF switch, the power is switched off at the power outlet and the power plug is unplugged from the power outlet.
Place the processing bowl over the motor shaft and turn the bowl slightly to the left until it drops down into position on the motor body. Gently turn the bowl clockwise to lock into position.
Place the chopping/mixing blade onto the motor shaft.
Add food to be processed into the bowl.
Place the lid on top of the bowl with the raised locking tab facing towards the release lever on the rear column on the motor base. Turn the lid clockwise until the lid locks into place.
Push the release lever on the rear column of the motor base down onto the raised locking tab of the lid until it locks in place.
Insert the power plug into a 230/240V power outlet and switch on at the power outlet.
Press the ON/OFF switch to ON and select either the Chop or Grind buttons to start the chopping/mixing or grinding functions. Press the appropriate button in short bursts.
To whisk ingredients, use the Whisk attachment and the Whisk button. Remove the lid and chopping/mixing blade by following steps. “How to disassemble the Mini Wizz”. Attach the Whisk attachment by following steps 3 to 8.

HANDY HINTS FOR BEST RESULTS

Do not overload the appliance by putting in too much food (Refer to table for quantities).
Limit cream to be whisked to 200ml.
Do not operate continuously for more than one minute.
Always remove blade before pouring out food.
Chop larger quantities in batches; do not exceed recommended maximum quantities.
To ensure even chopping results, cut food into pieces of similar size up to 2cm square.
When chopping herbs, ensure they are as dry as possible.
To avoid damage to the chopping/ mixing blade, do not process, or grind hard items such as frozen foods, ice, cereals, rice, spices and coffee.
Do not process thin liquids such as water or milk

RECOMMENDED FOODS, QUANTITIES AND FUNCTION

RECOMMENDED FOODS

TROUBLESHOOTING

HOW TO DISASSEMBLE THE MINI WIZZ

Turn the Mini Wizz to OFF at the ON/ OFF switch, switch the power off at the power outlet and unplug from the power outlet.
Press the button on the rear column of the motor base to unlock the release lever from the processing lid.
Turn the processing lid anticlockwise until it unlocks and pull the lid upwards to remove.
Carefully turn the processing bowl anticlockwise until it unlocks, then lift the bowl upwards to remove. Remove the chopping/mixing blade (or whisk) from the motor shaft by lifting the blade upwards.

CARE, CLEANING & STORAGE

When finished processing, follow instructions How to Disassemble the Mini Wizz.

CLEANING

Motor base

Wipe the motor base over with a clean damp cloth after each use.

Other parts

Hand wash the bowl, processing lid, storage lid, chopping/mixing blade and whisk in hot soapy water using a mild detergent. Rinse and dry thoroughly with a soft cloth. Do not use steel wool, scouring pads or abrasive cleaners, as these will scratch the surfaces. It is not recommended to wash any parts of this appliance in a dishwasher as exposure to harsh detergents and hot water temperatures will damage and shorten the life of the plastic parts.

NOTE: The chopping/mixing blade is very sharp so handle with care at all times. Use extreme care when washing. To avoid accidental cuts do not leave blade to soak in soapy water.

Food Stains and Odours

Food such as carrot may leave a stain on plastic parts whilst other foods such as garlic will leave a strong odour. To remove either, soak the parts for 5 minutes in 1 litre water with ¼ cup lemon juice.

Storage

Before storing, thoroughly dry all parts. Store the Mini Wizz assembled, with the chopping/mixing blade in place in the bowl, on the kitchen bench or in an easy to access cupboard. Store the blade out of reach of children. Store the appliance upright.
Do not store anything on top of the appliance.

NOTE: The chopper cutting blade is very sharp, use extreme care when storing.
WARNING: Never immerse the motor base, cord or power plug in water or any other liquid.

RECIPES

STARTERS & DIPS

GREEK YOGHURT DIP

INGREDIENTS

½ Lebanese cucumber
1 tablespoon salt
2 cloves garlic
200g carton natural yoghurt
1 tablespoon olive oil
Black pepper to taste
Black olives, for serving

METHOD

Wash and dry the cucumber and cut into cubes.
Assemble Wizz using chopping/ mixing blade.
Place cucumber, in batches, into processing bowl and process finely using the CHOP function.
Remove cucumber and mix with salt. Allow to stand 10 minutes.
Place cucumber in a sieve and rinse quickly under cold water.
Drain cucumber and press out excess water with the back of a spoon.
Reassemble using the chopping/ mixing blade.
Place garlic into the processing bowl and process finely using the CHOP function.
Add the yoghurt, oil and pepper and process until smooth using the CHOP function.
Stir cucumber into yoghurt mixture.
Cover and refrigerate until well chilled

Serve garnished with black olives and accompanied with crisp Lebanese bread strips or raw vegetable pieces.

PESTO DIP

INGREDIENTS

½ cup fresh basil leaves
1 clove garlic, peeled
25g pine nuts
¼ cup cottage cheese
1 tablespoon Parmesan cheese, grated

METHOD

Wash and dry the basil leaves.
Assemble Wizz using chopping/ mixing blade.
Place basil leaves and garlic into processing bowl and chop for 10–15 seconds using the CHOP function.
Add pine nuts and process for 10 seconds. Add cheeses and process until smooth.
Scrape mixture from sides of bowl with a spatula.
Process mixture in short bursts until smooth.
Cover and refrigerate until well chilled.

Serve with a selection of crisp breads and cracker biscuits.

SMOKED SALMON PATE

INGREDIENTS

1 teaspoon grated lemon rind
1 tablespoon lemon juice
75g cream cheese
75g smoked fish, skin and bones removed
(salmon, trout or mackerel)
1 teaspoon horseradish cream
1 teaspoon fresh parsley sprigs
White pepper, to taste

METHOD

Assemble Wizz using chopping/ mixing blade.
Place lemon rind, juice and cream cheese into processing bowl and process until smooth using the CHOP function.
Add fish, horseradish cream, parsley and pepper and process for 10–15 seconds.
Scrape mixture from sides of bowl with a spatula.
Process mixture in short bursts until smooth.
Cover and refrigerate until well chilled.

Serve with water biscuits or Melba toasts.

ETC

Breville The Mini Wizz BFP100 Food Processor Instruction Manual – Optimized PDF
Breville The Mini Wizz BFP100 Food Processor Instruction Manual – Original PDF