VEVOR ZD200 Monitor Desk Mount User Manual
- June 1, 2024
- VEVOR
Table of Contents
VEVOR ZD200 Monitor Desk Mount
Product Information
Specifications
-
Model: ZD200
-
Safe Loading Weight: Total: 52.9 lbs Max;
Single: 26.4 lbs Max -
VESA: 7575mm, 100100mm
-
Product Size: 1020110500mm
Product Usage Instructions
Safety Instructions
WARNING: Read this material before using this product. Failure to do so can result in serious injury.
- Assemble only according to the provided instructions.
- Keep the assembly area clean and well-lit.
- Avoid assembling when tired or under the influence of substances.
- Ensure proper assembly for product capabilities.
- Refer to the Assembly Diagram for additional information on parts.
Use Precautions
- Do not exceed the rated weight capacity to prevent instability.
- Follow mounting instructions to avoid damage or injury.
- Ensure the supporting surface can hold the weight of the equipment.
- Avoid over-tightening mounting screws.
- Keep small parts away from children to prevent choking hazards.
- Use the product indoors only to avoid product failure and injury.
FAQ
Q: Where can I find technical support or warranty information?
A: For technical support or an e-warranty certificate, visit www.vevor.com/support or email [email protected].
Q: What is the model of the monitor desk mount?
A: The model is ZD200 with a safe loading weight of 52.9 lbs total and 26.4 lbs for a single monitor.
We continue to be committed to providing you tools at a competitive price Save Half”, “Half Price” or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are saving half in comparison with the top major brands.
MODEL
MODEL: ZD200
- This is the original instruction, please read all manual instructions carefully before operating.
- VEVOR reserves a clear interpretation of our user manual.
- The appearance of the product shall be subject to the product you received.
- Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
SAFETY INSTRUCTIONS
WARNING: Read this material before using this product. Failure to do so can result in serious injury.
Assembly precautions
- Assemble only according to these instructions. Improper assembly can create hazards.
- Keep the assembly area clean and well-lit.
- Keep bystanders out of the area during assembly.
- Do not assemble when tired or when under the influence of alcohol, drugs, or medication.
- The product capabilities apply to properly and completely assembled products only.
- For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts in a clean work area.
Use precautions
- Use with products heavier than the rated weights indicated may result in instability causing possible injury.
- Mounts must be attached as specified in assembly instructions. Improper installation may result in damage or serious personal injury.
- Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
- Use the mounting screws provided and DO NOT OVER-TIGHTEN mounting screws.
- This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
PRODUCT PARAMETER
| Model | ZD200 |
|---|---|
| Safe Loading Weight | Total:52.9 lbs Max; Single:26.4 lbs Max |
| VESA | 7575mm, 100100mm |
| Product Size | 1020110500mm |
PARTS LIST
ASSEMBLY STEP
Method 1 —–1a
Method 2—–1b
The desktop has a hole for item 2 to go through
Connect With monitor
- Use a wrench (G) to screw the screws (A/B) into the four holes at the back of the monitor to avoid damaging the moni-tor by over-tightening the screws.
- When the display is inserted into the quick-release head, make sure the knob is vertical.
- After insertion, rotate the knob 90 degrees to the left.
Case 1: Monitor/Arm fall after installing your monitor
- Press the arm to make it keep it in a horizontal position and then use the Allen Key to adjust the screw on the arm.
- Turn counter-clockwise”+ ” direction) to increase gas spring tension till can hold the weight of your monitor.
- Note: You may need to turn the screw by many circles to tighten the arm.
Case 2: Monitor/Arm pops up after installing your monitor
- Press the arm to make it keep it in a horizontal position and then use the Allen Key to adjust the screw on the arm.
- Turn clockwise”- ” direction) to reduce gas spring tension till can stay in the position needed.
- Note: You may need to turn the screw by many circles to tighten the arm.
Adjust Flexibility
- If you feel the pitching angle is too tight or too loose when adjusting the mount, please adjust the Screw
Cable Management
Adjustable Instruction
- Manufacturer: Shanghaimuxinmuyeyouxiangongsi
- Address: Shuangchenglu 803nong 11hao 1602A-1609shi, baoshanqu, shanghai 200000 CN.
- Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia
- Imported to the USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
- EC REP E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfurt am Main.
- UK REP YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX
NEED HELP? CONTACT US!
- Have product questions? Need technical support? Please contact us: [email protected]
- Technical Support and E-Warranty Certificate www.vevor.com/support
Documents / Resources
|
VEVOR ZD200 Monitor Desk
Mount
[pdf] User Manual
ZD200 Monitor Desk Mount, ZD200, Monitor Desk Mount, Desk Mount, Mount
---|---