IXYS CS30-16io1 Thyristor Owner’s Manual
- June 1, 2024
- IXYS
Table of Contents
CS30-16io1
Thyristor
Single Thyristor
Part number
CS30-16io1
CS30-16io1 Thyristor
VRRM = 1600V
I TAV = 30A
VT = 103V
Features / Advantages:
- Thyristor for line frequency
- Planar passivated chip
- Long-term stability
Applications:
- Line rectifying 50/60 Hz
- Softstart AC motor control
- DC Motor control
- Power converter
- AC power control
- Lighting and temperature control
Package: TO-247
- Industry standard outline
- RoHS compliant
- Epoxy meets UL 94V-0
Disclaimer Notice
Information furnished is believed to be accurate and reliable. However, users
should independently evaluate the suitability of and test each product
selected for their own applications. Littelfuse products are not designed for,
and may not be used in, all applications. Read complete Disclaimer Notice at
www.littelfuse.com/disclaimer-electronics.
| Thyristor | Ratings |
|---|---|
| Symbol | Definition |
| max. | Unit |
| VRSM/DSM | max. non-repetitive reverse/forward blocking voltage |
| TVJ = 25°C | |
| VRRM/DRM | max. repetitive reverse/forward blocking voltage |
| 25°C | |
| I R/D | reverse current, drain current |
| 50 | µA |
| VR/D = 1600 V | |
| VT | forward voltage drop |
| I T = 60 A | |
| IT = 30 A | TVJ = 125 °C |
| I T = 60 A | |
| I TAV | average forward current |
| I T(RMS) | RMS forward current |
| VT0 r T | threshold voltage for power loss calculation only |
| = 150°C | |
| slope resistance | |
| RthJC | thermal resistance junction to case |
| RthCH | thermal resistance case to heatsink |
| Ptot | total power dissipation |
| ITSM | max. forward surge current |
| 45°C | |
| t = 8,3 ms; (60 Hz), sine | VR = 0 V |
| t = 10 ms; (50 Hz), sine | TVJ = 150°C |
| t = 8,3 ms; (60 Hz), sine | VR = 0 V |
| I²t | value for fusing |
A²s
t = 8,3 ms; (60 Hz), sine| VR = 0 V| | | 770| A²s
t = 10 ms; (50 Hz), sine| TVJ = 150°C| | | 580| A²s
t = 8,3 ms; (60 Hz), sine| VR = 0 V| | | 555| A²s
C J| junction capacitance| VR = 400 V f = 1 MHz| TVJ = 25°C| | 16| |
pF
PGM| max. gate power dissipation| tP = 30 µs| TC = 150°C| | | 10| W
tP = 300 µs| | | | 5| W
PGAV| average gate power dissipation| | | | | 0.5| W
(di/dt) cr| critical rate of rise of current| TVJ = 125 °C; f = 50
Hz| repetitive, IT = 90 A| | | 150| A/µs
tP = 200 µs; diG /dt = 0.3 A/µs;| | | | |
IG = 0.3 A; V = ⅔ VDRM| non-repet., IT = 30 A| | | 500| A/µs
(dv/dt) cr| critical rate of rise of voltage (linear voltage rise)| V
= ⅔ VDRM
R GK = ∞; method 1| TVJ = 125°C| | | 1000| V/µs
VGT| gate trigger voltage| VD = 6 V| TVJ = 25°C| | | 1| V
IGT| gate trigger current| | TVJ = -40°C| | | 1.2| V
VD = 6 V| TVJ = 25°C| | | 55| mA
VGD| gate non-trigger voltage| | TVJ = -40°C| | | 80| mA
VD = ⅔ VDRM| TVJ = 125°C| | | 0.2| V
IGD| gate non-trigger current| | | | | 5| mA
I L| latching current| t p =10 µs
IG = 0.3 A; diG/dt = 0.3 A/µs| TVJ = 25 °C| | | 150| mA
I H| holding current| VD = 6 V RGK = ∞| TVJ = 25 °C| | | 100| mA
tgd| gate controlled delay time| VD = ½ VDRM
IG = 0.3 A; diG/dt = 0.3 A/µs| TVJ = 25 °C| | | 2| µs
t q| turn-off time VR = 100 V; IT = 30A; V = ⅔ VDRM TVJ 125 °C
di/dt = 15 A/µs dv/dt = 20 V/µs tp = 200 µs| | 150| | µs
Package| TO- 247| Ratings
---|---|---
Symbol| Definition| Conditions| min.| typ.|
max.| Unit
I RMS| RMS current| per terminal| | | 70| A
T VJ| virtual junction temperature| | -40| | 150| °C
T op| operation temperature| | -40| | 125| °C
T stg| storage temperature| | -40| | 150| °C
Weight| | 6| | g
M D| mounting torque| | 0.8| | 1.2| Nm
F C| mounting force with clip| | 20| 120| N
Ordering| Ordering Number| Marking on Product|
Delivery Mode| Quantity| Code No.
---|---|---|---|---|---
Standard| CS30-16io1| CS30-16io1| Tube| 30| 466581
Similar Part| Package| Voltage class
---|---|---
CS30-12io1| TO-247AD (3)| 1200
CS30-14io1| TO-247AD (3)| 1400
Equivalent Circuits for Simulation
- on die level
| Thyristor| TVJ= 150 °C
---|---|---
V 0 max threshold voltage| 0,87| V
R 0 max slope resistance *| 11.7| mΩ
Outlines TO-247
| Sym. | Inches | Millimeter **** |
|---|---|---|
| **** | min. | **** max. |
| A | 0.185 | 0.209 |
| A1 | 0.087 | 0.102 |
| A2 | 0.059 | 0.098 |
| D | 0.819 | 0.845 |
| E | 0.610 | 0.640 |
| E2 | 0.170 | 0.216 |
| e | 0.215 | BSC |
| L | 0.780 | 0.800 |
| L1 | – | 0.177 |
| Ø P | 0.140 | 0.144 |
| Q | 0.212 | 0.244 |
| S | 0.242 | BSC |
| b | 0.039 | 0.055 |
| b2 | 0.065 | 0.094 |
| b4 | 0.102 | 0.135 |
| c | 0.015 | 0.035 |
| D1 | 0.515 | – |
| D2 | 0.020 | 0.053 |
| E1 | 0.530 | – |
| Ø P1 | – | 0.29 |
Thyristor
IXYS reserves the right to change limits, conditions and dimensions.
Data according to IEC 60747and per semiconductor unless otherwise specified
© 2019 IXYS all rights reserved
Downloaded from Arrow.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>