CAAVO W4RC1 Remote Controller User Guide
- June 6, 2024
- CAAVO
Table of Contents
**CAAVO W4RC1 Remote Controller User Guide
**
Getting Started
This guide is here to help you get started with Control Center. If you have any questions, you can contact Caavo support at support.caavo.com at any time.
-
If you’ve already created your Caavo Account, skip this step. If you haven’t created your Caavo Account online, go to https://setup.caavo.com and create one.
-
Unpack Control Center.
Your box includes: Control Center, Caavo Remote + Batteries, IR Blasters, Power Cable. -
Place the included AA batteries into the Caavo Remote.
-
If you have an Audio Video Receiver (AVR) or Sound Bar connected to your TV via HDMI, leave it connected on both ends. Then, disconnect all your HDMI source devices from your AVR/Sound Bar. You will connect Caavo to your AVR/ Sound Bar. OR If you do not have an AVR/Sound Bar, or your AVR/Sound Bar is connected via RCA or optical, disconnect all your HDMI source devices from your TV. You will connect Caavo directly to your TV.
-
Place Control Center in a central location where IR signals can reach both your source devices and your AVR or TV.
-
Plug in your source devices to the 4 INPUT ports on the back of Control Center
-
Plug in an HDMI cable from the OUT port on Control Center into your AVR, Soundbar, or directly into your TV (if you are not using AVR or Soundbar).
-
Connect the Caavo power cord to a wall outlet.
-
Turn on your TV with your TV’s remote (and AVR/Sound Bar too). Follow the on-screen instructions to complete your setup experience. During setup, you will be instructed how to use the included IR accessories (if needed).
Three common ways to connect Control Center
-
Connect devices to Control Center, Then, to your TV
-
Connect devices to Control Center, Then, to your AVR/Soundbar, then TV
-
Connect devices to Control Center, Then, to your TV and then optical from TV to AVR or Soundbar
Your Caavo Account
The last step in the setup process is to sign in to (or create) your Caavo account. Here you will be asked to select the apps and streaming services that you want to use with Caavo. You’ll need to make sure you’ve downloaded the apps on each source device, streamer box, or STB in order to use them with Caavo.
Read more about signing into you Caavo account>
Related articles
-
Getting Started Tips and Tricks
Getting Started This guide is here to h.. -
HDMI-IR Controller
The HDMI-IR controller is specifically … -
TV-IR Controller
The TV-IR controller is 9 feet long and… -
How Many Caavo Top Cover Types Are There?
The Caavo wood top cover comes in three… -
Power Cord
The included Caavo power cord is design… -
Wall Charger
The included USB wall charger is design… -
What To Do If I’d Like A Different Wood Top For My Caavo
Please contact customer support via sup…
Comments
0 comments
Article is closed for comments
Facebook
Twitter
Linked in
YouTube
© Copyright 2018 Caavo Inc. All Rights Reserved.
FCC Information
This device complies with part 15 of the FCC Results. Operation is subject to
the
following two conditions :
- This Device may not cause harmful interface, and
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for CLASS B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which receiver is connected.
- Consult the dealer or experienced radio/TV technician for help.
WARNING
Changes or modifications not expressly approved by the manufacturer could void
the user’s authority to operate the equipment.
“CAUTION : Exposure to Radio Frequency Radiation.
Antenna shall be mounted in such a manner to minimize the potential for human
contact during normal operation. The antenna should not be contacted during
operation to avoid the possibility of exceeding the FCC radio frequency
exposure limit.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>