Teamgee S3 14 Inch Portable Triple Screen Laptop Workstation Instruction Manual
- July 20, 2024
- Teamgee
Table of Contents
Teamgee S3 14 Inch Portable Triple Screen Laptop Workstation
Specifications:
- Product Name: Triple Screen Laptop Screen Extender
- Supported Ports: Type-C, HDMI, USB-A
- Power Requirement: 5V, 2A
- Maximum Folding Angle: 90 degrees
Product Usage Instructions
Connection Steps:
If your laptop has one full-featured Type-C port, one USB-A port, and one HDMI port, follow these steps:
- Connect one monitor using the USB-C cable.
- Connect the other monitor using the USB-A to USB-C cable and the HDMI to Type-C cable.
Power Supply:
Warm Tips:
- Ensure the Type-C data wire is connected securely.
- If the screen cannot be powered on or restarted, supply external power of 5V, 2A.
- Use the custom HDMI to Type-C data cable included in the packaging for proper connection.
Troubleshooting Tips:
If you encounter issues like “No Signal” or a dark screen, consider the following:
- Check for connection failures.
- If the screen does not light up, connect an external power supply providing 5V/2A.
- Contact customer support for further assistance.
How to Connect:
If your laptop has two full-featured Type-C ports, connect the S3 directly to your laptop with two Type-C cables.
Tips for Use:
Please follow these tips to avoid damage:
-
Refer to the pictures provided to correctly plug and unplug the data cable.
-
Adjust the support stand to the appropriate angle and place it behind the computer screen for dual-screen support.
Packing List
These Ports You Need to Know
Key Definitions
Operation Steps
Open the stand, adjust it to the appropriate supporting angle, place it behind the computer screen, and complete the installation of the dual-screen support.
How to Connect
TYPE-C Connection:
If your laptop has two full-featured Type-C ports, you can connect the S3 directly to your laptop with two Type-C cables.
Notice:
If the display has no signal or the signal is unstable after connection, please connect an external 5V/2A power adapter to power the laptop.
TYPE-C & HDMI & USB-A Connection:
If your laptop has one full-featured Type-c port, one USB-A port and one HDMI port, please first connect one monitor using the USB-C cable. Then connect the other monitor using the USB-A to USB-C cable and the HDMI to Type-C cable.
Notice:
If the display has no signal or the signal is unstable after connection, please connect an external 5V/2A power adapter to power the laptop.
FAQs
- Q1: How can I tell if the USB-C port on my computer is full-featured?
- A1: A USB-C port with one of the following symbols is a full-featured one. Thunderbolt 3 or Thunderbolt 4 ports are also full-featured ports. You can view the port parameters in the manual or on the Web.
- Q2: Why does one monitor show “No Signal” ?
- A2: There may be a connection failure or the computer port does not support video output. Please contact us for troubleshooting. We will provide you with a solution as soon as possible!
- Q3: The screen does not light up after connecting.
- A3: It is possible that your computer does not have enough power. Please charge the monitor with an external power supply that provides 5V/2A power. You can also contact us for further solutions.
Tips for Use
Please refer to the pictures below to plug and unplug the data cable to avoid damage.
For more detailed information, please refer to the product brochure