superbrightleds HLV8 Series LED Headlight Bulbs with Internal Driver User Manual
- June 1, 2024
- superbrightleds
Table of Contents
superbright LEDs HLV8 Series LED Headlight Bulbs with Internal Driver
Product Information
Specifications:
- Product Series : HLV8 Series
- Revision Date : V4 03/27/2023
Product Usage Instructions
Installation:
-
1. Remove the old light bulb from the headlight housing. - For models with a removable collar (e.g. H4s), remove the collar from the light (no tools required) and mount the collar in the headlight housing.
- Install an LED lamp in the correct direction.
Note: The lighting pattern is adjustable by rotating the lamp body on removable collar models only.
- Connect the plug to the wiring harness.
- If clearance allows, reinstall the dust cap on the rear of the headlight housing if applicable.
FAQ
- Q: Can the LED lamp be replaced?
- A: Yes, the LED lamp can be replaced following the installation instructions provided in the manual.
- Q: Is the lighting pattern adjustable on all models?
- A: The lighting pattern is adjustable by rotating the lamp body only on models with a removable collar.
Warranty
A 5-year warranty is given from the date of purchase to the original purchaser on halogen replacement bulbs. The warranty is for replacement and covers manufacturing faults only. Labor costs are not covered by warranty. Any damage caused by improper installation, physical damage, or connecting to voltages other than 12–24 VDC (halogen replacements) or an OEM ballast (HID replacements) will not be covered.
Safety and Notes
- The product should be installed by a qualified technician where possible.
- LED headlight replacements are only water-resistant when used in an enclosed headlight housing assembly. Do not expose the chip side of the light to water directly or submerse the bulbs.
- Adequate ventilation is necessary for good heat dissipation, which will prolong the lifespan of the bulbs.
- Check the voltage of the vehicle to be sure it complies with the operating voltage of this product (12–24 VDC for halogen replacements).
- Ensure all wire connections and polarities are correct before applying power to avoid damage to the bulbs.
- If a fault occurs, contact Super Bright LEDs to initiate a return. Do not attempt to repair this product by yourself.
- For HID replacement bulbs, ensure the existing ballast is working and still installed properly as it is required for operation. Note: These bulbs will not work with Marelli Automotive Lighting part numbers 1 307 329 153 and 1 307 329 115 (as well as any numbers this supersede).
Installation
- Remove the old light bulb from the headlight housing.
- For models with a removable collar (e.g. H4s), remove the collar from the light (no tools required) and mount the collar in the headlight housing.
- Install an LED lamp in the correct direction.
- Note : The lighting pattern is adjustable by rotating the lamp body on removable collar models only.
- Connect the plug to the wiring harness.
- If clearance allows, reinstall the dust cap on the rear of the headlight housing if applicable.
- 4400 Earth City Expy, St. Louis, MO 63045
- 866-590-3533
- superbrightleds.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>