superbrightleds LFB-W07 LED Ready Landscape Well Light User Manual
- May 15, 2024
- superbrightleds
Table of Contents
superbrightleds LFB-W07 LED Ready Landscape Well Light User Manual
LED Ready Landscape Well Light
Safety and Notes
- For use with OUTDOOR, low-voltage landscape lighting systems
- NOT FOR USE with submersible or pool/spa
- Do not submerge in water, the product can be
- For low voltage use Power supply voltage must match installed bulb.
- LFB-W07, LFB-W08, LFB-W09, and LFB-W10 are designed for MR16 (GU5.3 base) bulbs only. LFB-W06 is designed for PAR36 bulbs only. Bulb not
- The housing for LFB-W06 can be installed two ways—for a flat or slantedtop—depending on preference.
Recommended Accessories
| Part Number | Description |
|---|---|
| WWN-2212 | silicone filled twist-on wire connector |
| SFT-20 | self fusing silicone tape |
| WP14-2DB | 14 gauge landscape wire |
| WP12-2DB | 12 gauge landscape wire |
Assembly
Installation Instructions
- Install compatible
- Lay fixtures out as they will be
- Run landscape wire from power supply to each Wire must be within 3” of mounting stake to allow power connections to be made.
- Use waterproof connectors to connect lights to supply wires as well as wires running to additional
- Dig out an appropriate hole for and install the
- Turn on power supply and ensure all fixtures are If one or more individual fixtures are not working, check each connection. It is recommended to wrap all connections in electrical or self-fusing tape.
- Bury landscape wire, fixture pigtails, and A depth of 3” is
recommended. Wires and connectors can also be covered by mulch or stone.
Note: LFB-W07 shown, others are similar
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Loading......