superbrightleds com LFSMB-xWBK-2PK Solar Powered LED Bollard Lights User Manual
- June 2, 2024
- superbrightleds com
Table of Contents
superbrightleds com LFSMB-xWBK-2PK Solar Powered LED Bollard Lights
Specifications:
- Product: Solar-Powered LED Bollard Lights
- Model: LFSMB-xWBK-2PK
- Power Source: Solar
- Components: Solar Cap, Plastic Isolation Strip, Diffuser,Shaft, Cylinder, Stake
- Warranty: One year under normal use conditions
Product Usage Instructions
Installation:
- Remove cover and plastic isolation strip to connect the internal battery and power the LED.
- Assemble the product following the diagram provided.
- Test the solar head switch by blocking the light; LED should turn on automatically.
- Insert the ground stake and push it into the ground, ensuring proper sunlight exposure for charging.
Safety and Notes:
Ensure proper installation to prevent any accidents or damage.
Always handle with care.
Troubleshooting:
Problems:
- Not working
- Short work time
Reasons:
- Solar panel covered
- Battery damage due to service life
- Improper sunlight exposure
- Winter or rainy days affecting charging
Solutions:
- Charge under the sun
- Cover the solar panel with a cloth
- Replace the battery
- Ensure proper sunlight exposure
- Check after full charge
Warranty Info:
The product is covered by a one-year warranty under normal use conditions.
Warranty details are provided with the purchase.
Frequently Asked Questions (FAQ):
Q: How long does the LED light last on a full charge?
A: The LED light duration varies but typically lasts several hours on a
full charge, depending on usage.
Q: Can the bollard lights be used in extreme weather conditions?
A: While the lights are weather-resistant, it is advisable to avoid using
them in severe weather to prolong their lifespan.
LFSMB-xWBK-2PK
Important: Read all instructions prior to installation.
Parts Diagram
- Solar Cap
- Plastic Isolation Strip
- Diffuser
- Shaft
- Cylinder
- Stake
Installation
- Remove cover and plastic isolation strip. Internal battery will now be connected and LED will have power.
- Connect the product together as shown in the diagram.
- Test solar head switch by covering it to block the light. LED should turn on automatically.
- Insert ground stake and push into the ground.
Note: Ensure installation location has suitable sunlight for proper charging.
Safety and Notes
- For outdoor use only. Not for underwater use.
- Do not use with submersible or pool/spa equipment.
- Light will shut off automatically in excessively cold temperatures (below minimum operating temp.) to protect the light.
- Solar panel must be cleaned at least every three months for best lighting results.
- Weather and physical obstructions that block sunlight will negatively affect the ability of the light to charge.
- Make sure the light is installed in a location where direct sunlight is present.
Troubleshooting
| Problems | Reasons | Solutions |
|---|---|---|
| Not working | power off | Charge under the sun |
| Do not cover the solar panel | Cover with the cloth |
Short work time
| The battery is damaged due to its service life| Change the new battery
Place the product without sunshine|
Place the product under the sun
Winter and the rainy days|
Check after the fully charge
Warranty Info
Warranty The product can be used for one year in the normal use and preservation process.
with this card, one year’s free warranty is provided from the date of purchase
The following conditions shall not enjoy the warranty
- can’t produce the warranty invoices without authorization or purchase vouchers
- dismantling converted the damage is the product) in the process of using handling inadvertently dropped to cause damage or malfunction,Do not according to the instruction to use the maintenance and cause damage because of the company authorized the repair damaged due to improper maintenance organizations,
Damage is caused due to unforeseen natural disasters beyond warranty period