nVent IFBS20 Eriflex IFBS Bracing System Installation Guide

Table of Contents

The product is an installation accessory that is designed to be used with nVent products.
It is available in various models including IFBS20, IFBS24, IFBS32, IFBS40, IFBS50, and IFBS63.
The product is made of durable materials and is designed to withstand specified load ratings.

Specifications

Mounting Instructions

Choose the appropriate model based on your requirements (IFBS20, IFBS24, IFBS32, IFBS40, IFBS50, or IFBS63).
If using the Clic mounting option, align the product with the specified distance of at least 50mm from other objects.
If using the Unclic mounting option, follow the instructions provided with the product for proper installation.
If required, use the DIN 7504 M – 3,9X13 mounting option for additional support.

Optional Accessory Installation

If you have the optional accessory (IFBSXXSCXX), follow these steps for installation:

Ensure the minimum distance of A is M8.
Use the provided screws (x1, x2, x3, etc.) to attach the accessory to the product.
Follow any additional instructions provided with the accessory for proper installation.

FAQ

Q: Can I use the product for purposes other than what it was designed for?

A: No, nVent products must only be used for their intended purpose as specified in the instruction sheets and training materials.

Q: What should I do if I experience product malfunction?

A: If you experience product malfunction, property damage, or any issues with the product, please contact nVent technical support at www.nVent.com for assistance.

Q: Can I modify the product specifications?

A: No, any modification to the product specifications may void your warranty and compromise the safety and performance of the product.

nVent-IFBS20-Eriflex-IFBS-Bracing-System-FIG-2

WARNING:

nVent products shall be installed and used only as indicated in nVent product instruction sheets and training materials. Instruction sheets are available at www.nVent.com and from your nVent customer service representative.
nVent products must never be used for a purpose other than the purpose for which they were designed or in a manner that exceeds specified load ratings. damage, serious bodily injury and/or death, and void your warranty.

All governing codes and regulations and those required by the job site must be observed.
Always use appropriate safety equipment such as eye protection, hard hat, and gloves as appropriate to the application. nVent, nVent CADDY, nVent ERICO Cadweld, nVent ERICO Critec, nVent ERICO, nVent ERIFLEX, and nVent LENTON are owned by nVent or its global affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without prior notice.

nVent-IFBS20-Eriflex-IFBS-Bracing-System-FIG-5

nVent, nVent CADDY, nVent ERICO Cadweld, nVent ERICO Critec, nVent ERICO, nVent ERIFLEX, and nVent LENTON are owned by nVent or its global affiliates.
All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without prior notice.
TECHNICAL SUPPORTwww.nVent.com