VEVOR 150DB Train Horns Kit INSTRUCTIONS Manual
- June 1, 2024
- VEVOR
Table of Contents
VEVOR 150DB Train Horns Kit
INSTALLATION INSTRUCTIONS (plan A)
- AIR HORN
- GAS POPE JOINT
- AIR HORN SOLENOID
- AIR TUBE
- AIR COMPR ESSOR
- FUSE WIRE
- HORN BUTTON
- BATTERY IN THE VEHICLE
- PRESSURE METER
- PRESSURE SWITCH
- DRAIN VALVE
- POWER SWITCH
- INSTALL THE SYSTEM EN A COOL DRY AREA. AVOID WET AND HOT AREAS.
- NEVER WET TOUR COMPRESSOR MOTOR.
- COMPRESSOR MOTOR MUST BE INSTALLED IN A FLAT AREA. AVOID INSTALLING AT AN ANGLE.
- IT IS HIGHLY RECOMMENDED THAT YOU INSTALL, THE TANK AND COMPRESSOR IN THE REAR TRUNK OF THE VEHICLE. IF YOU NEED ADDITIONAL NYLON AIR HOSE IT CAN BE OBTAINED AT ANY HARDWARE STORE.
- IT CAN BE OBTAINED AT ANY HARDWARE STORE. AFTER YOU HAVE INSTALLED THE TANK, COMPRESSOR AND HORNS, PROCEED TO INSTALLED THE NYLON HOSES MAKING SURE THAT THEY ENTER THE BRASS
- FITTINGS ALL THE WAY AND PAST THE BULT. IN O-RINGS (SMALL BUMPS). THE ELECTRICAL INSTALLATION SHOULD BE DONE USING 14 GAUGE OR THICKER WIRE DO NOT USE A THINNER WIRE AS THE MOTOR USES 15 AMPS AND UNDER STRESS IT MAY USE AS MUCH AS 20 AMPS.
- POEASE TURN OFF THE POWER SWITCH AFTCH AFTER THE CAR STALLS
- YOU MUST INSTALL A 20 AMP FUSE BETWEEN YOUR POSITIVE 12 VOLT SOURCE AND THE SWITCH LOCATED AT THE AIR TANK.
- ROLLOW THE DRAWING CLOSELY IN OROER TO AVOID MIS. TAKES, IF YOU HAVE ANY DOUBTS CONTACT AN ELECTRO. MECHANIC FOR HELP.
- AVOID USING HOT SOLDER ON THE AUTOMATIC SWITCH LOCATED ON THE AIR TANK. HEAT MAY PERMANENTLY DAMAGE THIS SWITCH.
- DURING THE COMPRESSOR INFLATION, PLEASE STOP FOR COOLING AFTER 10 MINUTES’ CONTINUOUS OPERATION, WIICH CAN EXTEND THE MOTOR’S SERVICE LIFE.
- REGULAR INSPECTION (NORMALLY FOR MONTHS, SHOULD BE ADJUSTED ACCORDING TO THE USE OF WET AND DRY CLIMATE) DRAINED OUT THE CONDENSATE CLEAN OF THE GAS CONTAINER, THE AIR PRESSURE MUST BE LESS THAN 0. 1JMPA WHEN THE WATER IS RELEASED TOAVOID THE RISK!
- THE COMPRESSOR PISTON IS EOUIPPED WITH A LUBRICTING SYSTEM TO ALLOW FOR COOLNESS AND LUBRICATION. CHECK ECERY TWO WEEKS AND ADD A FEW DROPS OF SAE40 MOTOR OIL DO NOT OVERFILL
Package Includes
- 1 x 150DB Train Horns
- 1 x Air Compressor
- 1 x Air Tank (3 liters)
- 1 x Pressure Switch
- 1 x Air Hose
- 1 x Set of Mounting Hardware
- 1 x Solenoid Valve
- 1 x User Manual
Features
-
Loud and Powerful
Emits a powerful 150DB sound for maximum attention. Designed to ensure you are heard even in the loudest environments, this train horn kit provides a warning that cannot be ignored. The four-trumpet configuration amplifies the sound to deliver a robust, clear, and commanding blast. -
Durable Construction
Made from high-quality chrome-plated zinc for longevity. The shiny chrome finish not only adds a stylish look to your vehicle but also ensures durability and resistance to corrosion. This robust construction guarantees the horns will withstand various environmental conditions and continue to perform reliably. -
Complete Kit
Includes all necessary components for a straightforward installation. The kit comes with a 12V air compressor, a 3-liter air tank, a pressure switch, an air hose, a solenoid valve, and all the essential mounting hardware. This comprehensive package ensures you have everything you need to set up your train horn system efficiently. -
High-Capacity Compressor
The 12V 150 PSI compressor ensures efficient air supply. Built for excellent performance, the compressor system comes complete with an air tank and a pressure switch that controls the compressor’s operation. This high- capacity compressor ensures your horns receive a consistent air supply to produce a powerful sound. -
Wide Application
Suitable for various vehicles including trucks, cars, and boats. This train horn kit can be installed on almost any vehicle, making it a versatile solution for those needing a loud and reliable horn system. It is compatible with trucks, cars, vans, tractors, SUVs, boats, and motorcycles. -
4 Trumpet Train Air Horn Kit
The four-trumpet design not only amplifies the sound but also ensures a more comprehensive and effective horn blast. This configuration is optimized to deliver a powerful 150DB sound that stands out in any situation. -
Shiny Chrome Finish
Our air horn has a glistening chrome finish that adds a striking and stylish appearance to any vehicle. The high-quality chromed steel construction ensures durability and longevity, allowing the horn to withstand various environments and conditions. -
120PSI Air Compressor
Our compressor system includes a 12-volt compressor, air tank, pressure switch, and mounting hardware, all built for excellent performance and easy installation. This setup ensures that your horns produce the loudest sound possible, making them really sing when activated. -
Reinforced Security
Equipped with a safety valve and in-line fuse, the pump will automatically shut off when the tank pressure exceeds 120 PSI. This safety feature ensures the longevity of the compressor and prevents potential damage from over- pressurization. -
Easy Installation
This train horn kit provides everything you need for installation, including horns, compressor, air tank, pressure switch, hose, and basic mounting hardware. The straightforward installation process means you can have your new horn system up and running quickly without the need for specialized tools or skills. -
Extensive Uses
The train horn is suitable for almost any vehicle. While it is the perfect upgrade for trucks, it is also compatible with cars, vans, tractors, SUVs, boats, and motorcycles. This extensive compatibility makes it an ideal choice for anyone needing a reliable and loud horn system for their vehicle.
Usage
- Installation: Follow the user manual for installing the horn kit, including mounting the horns and connecting the air compressor.
- Wiring: Connect the horn to the vehicle’s battery and install the pressure switch to control the air compressor.
- Operation: Once installed, activate the horn using the vehicle’s horn button for a powerful 150DB sound.
Care and Maintenance
- Regular Inspections: Periodically check all connections, hoses, and components for wear or damage.
- Cleaning: Keep the horns clean from dirt and debris to maintain sound quality.
- Compressor Maintenance: Ensure the air compressor’s intake is free from obstructions and occasionally check for moisture build-up in the air tank.
Troubleshooting
- Horn Not Sounding:
- Check electrical connections and ensure the battery is properly connected.
- Verify the pressure switch and solenoid valve are functioning correctly.
- Weak Sound:
- Inspect the air hoses for leaks or blockages.
- Ensure the compressor is building adequate pressure (150 PSI).
- Intermittent Operation:
- Check for loose connections and secure all mounting hardware.
- Verify the air tank has no cracks or damage and holds pressure effectively.
FAQs
What is the maximum sound output of the VEVOR 150DB Train Horns Kit?
The VEVOR 150DB Train Horns Kit can generate a powerful 150 dB sound.
How many trumpets does the VEVOR 150DB Train Horns Kit have?
The VEVOR 150DB Train Horns Kit comes with a 4-trumpet air horn kit.
What is the material composition of the VEVOR 150DB Train Horns Kit?
The VEVOR 150DB Train Horns Kit is made of zinc chrome-plated material and carbon steel body for maximum strength and durability.
What type of vehicles is the VEVOR 150DB Train Horns Kit suitable for?
The VEVOR 150DB Train Horns Kit is designed for use on any 12V vehicle, including cars, trucks, trains, vans, and boats.
What is the maximum air pressure of the compressor included in the VEVOR 150DB Train Horns Kit?
The VEVOR 150DB Train Horns Kit comes with a 120 PSI air compressor.
What is the capacity of the air tank included in the VEVOR 150DB Train Horns Kit?
The VEVOR 150DB Train Horns Kit includes a 1.6 gallon (6 L) air tank with a gauge.
What is the purpose of the VEVOR 150DB Train Horns Kit?
The VEVOR 150DB Train Horns Kit is designed to effectively alert cars, pedestrians, and animals, especially during long-distance driving, sharp turns, and adverse weather conditions.
What additional components are included in the VEVOR 150DB Train Horns Kit?
The VEVOR 150DB Train Horns Kit includes four horns, a solenoid valve, an air tank, a compressor, and air pipes.
What is the trumpet width of the VEVOR 150DB Train Horns Kit?
The trumpet width of the VEVOR 150DB Train Horns Kit is 90 mm (4 inches).
Is a power cord required for the compressor in the VEVOR 150DB Train Horns Kit?
The VEVOR 150DB Train Horns Kit includes a compressor, but it is unclear if a separate power cord is needed.
What is the purpose of the solenoid valve included in the VEVOR 150DB Train Horns Kit?
The solenoid valve is likely used to control the airflow to the horns in the VEVOR 150DB Train Horns Kit.
What is the maximum engine displacement of vehicles suitable for the VEVOR 150DB Train Horns Kit?
The VEVOR 150DB Train Horns Kit does not specify the maximum engine displacement of compatible vehicles.
Video-VEVOR 150DB Train Horns Kit
Download this manual:VEVOR 150DB Train Horns Kit INSTRUCTIONS Manual