GlocalMe GLMR23A01 4G LTE Wireless Router User Guide

GLMR23A01 4G LTE Wireless Router

Specifications:

• Model: GLMR23A01
• Input: DC 12V 3A
• IP: 192.168.169.1
• SSID: GlocalMe-2.4GHz-xxxxxx, GlocalMe-5GHz-xxxxxx
• Password: XXXXXXXX
• FCC ID: 2AC88-GLMR23A01
• MAC: 123456123456 SN: 012345678912345678
• IMEI: 123456789012345

Product Overview:

1. LTE extension antenna
2. Indicator status
3. Power on/off button
4. SIM card slot
5. Power port
6. Network port
7. Wi-Fi Protected Setup button
8. Reset button

Product Usage Instructions:

1. Download GlocalMe App:

Download the GlocalMe app from the app store on your mobile
device.

2. Create a GlocalMe Account (In App):

Open the app, click on “REGISTER,” and follow the on-screen
instructions to create your GlocalMe account.

3. Link R40 to GlocalMe App:

Turn on the R40 device and connect it to the GlocalMe app using
the provided credentials.

4. Purchase GlocalMe Data Plans (In App):

Within the app, select and purchase the desired data plan for
your usage needs.

5. Install the Antenna:

Remove the protective cover, plug in the antenna, and adjust its
direction for optimal signal reception.

6. Turn on R40:

Press the power button to turn on the R40 device.

7. Connect to Wi-Fi:

Locate and connect to the provided Wi-Fi network names (SSIDs)
with the corresponding passwords.

8. Connect to LAN (optional):

If desired, connect the R40 device to a LAN network using the
available port.

9. Recommended Placement Angles for LTE External Antennas:

To enhance user experience, position LTE external antennas at
recommended angles for better signal reception.

How To Use A Physical SIM Card:

1. Insert Mini-SIM2FF into the designated slot.
2. If the SIM card is PIN-protected, unlock it before use.
3. Manually set the Access Point Name (APN) if necessary for
   network connectivity.

Frequently Asked Questions:

Q: The power light doesn’t turn on when you power on the

device.

A: Please ensure that the power adapter is
properly connected and verify that the power button is pressed.

85*150mm, 80gsm

85mm
R40 User Guide
Copyright © 2023 uCloudlink All Rights Reserved

1.Download GlocalMe App
· Download and install GlocalMe app on your mobile phone
GlocalMe
2.Create a GlocalMe Account (In App)
· ClickLogin- Register · Follow the steps to register an account (You can register with email or mobile phone number)
REGISTER
138
REGISTER

3. Link R40 to GlocalMe App
· Open GlocalMe App and clickDevice- Add a device by QR code Scan the device QR-code on the back of the R40

6.Turn on R40
· Plug in electric adapter and press the power button of R40 until 3G/4G lights are steady on

4G LTE Wireless Router

Model: GLMR23A01

Input: DC 12V 3A

IP: 192.168.169.1

User/Key: admin

SSID:XXX1200AT-2.4GHz-xxxxxx

SSID:XXX1200AT-5GHz-xxxxxx

Password:XXXXXXXX

FCC ID:2AC88-GLMR23A01

MAC:123456123456 SN:012345678912345678

IMEI:123456789012345 UCLOUDLINKcSINGAPOREPTE.LTD.

Made in China

4. Purchase GlocalMe Data Plans (In App)
· Choose the data plans that suit your needs. (You might skip this step if you have ordered data plan while purchasing the device)

Data Packages
Day Pass 2GB high speed
USD X.XX

Monthly Pass 100GB high speed
USD X.XX

Year Pass 150GB high speed/mo
USD X.XX

10GB 15 days
USD X.XX

5. Install the antenna Remove the protective cover, plug in the antenna and adjust the direction.

7.Connect To Wi-Fi
· Find the Wi-Fi network name and password at the back of R40 and connect the network on your mobile device(s) at Wi-Fi setting.

SSID: GlocalMe_2.4GHz_xxxxxx SSID: GlocalMe_5GHz_xxxxxx PWD: xxxxxxxx

4G LTE Wireless Router

Model: GLMR23A01

Input: DC 12V 3A

IP: 192.168.169.1

User/Key: admin

SSID:GlocalMe-2.4GHz-xxxxxx

SSID:GlocalMe-5GHz-xxxxxx

Password:XXXXXXXX

FCC ID:2AC88-GLMR23A01

MAC:123456123456 SN:012345678912345678

IMEI:123456789012345 UCLOUDLINKcSINGAPOREPTE.LTD.

Made in China

Wi-Fi
GlocalMe_2.4GHz-xxxxxx GlocalMe_5GHz_xxxxxx

8.Connect to LAN (optional)
· You can also plug in the network cable through the LAN port and connect to your computer and other devices
9. Recommended placement angles for LTE external antennas to improve user experience.

}How To Use A Physical SIM Card?~
(R40 is default to run on GlocalMe Cloud SIM services, but it also supports local SIM cards
· Turn Off R40 · Insert the SIM card (see the direction showing at below graphic) · Power on and wait until the 3G/4G light staying on. · When the network is ready for access, connect your computer or smart terminal to the R40 via WiFi setting or Ethernet cable. Type 192.168.169.1 into your web’s browser address bar to access the login page. Enter the username “admin” and password “admin” to access the management page. · ClickNetwork– Mobile Network Settings–Select ModePhysical SIM–ClickConfirmation

Insert Mini-SIM2FF

}Unlock the SIM Card (If PIN protected)~
· If your SIM card is protected by a PIN code, please insert the SIM card into your phone and follow the prompts on your mobile phone to unlock the PIN.
}Set The APN Manually~
If you still cannot connect to the network after the above steps, Access the web page entering 192.168.169.1 in the browser address bar. ClickNetwork– Mobile Network Settings—Select Mode select Physical SIMAccess Point Name(APN) setting APNClickSave

R40

Status

Mobile Network Settings

Network

Select Mode

WAN Settings

Physical SIM CONFIRMATION

LAN Settings DHCP Server

Access Point NameAPN)
APN*

Mobile Network Settings

Username

Password Authentication Type NONE

SAVE

CANCEL

1. Indicator Status

Name

Description

Status

Status Description

POWER

On Power Indicator
Off

The device is powered on The device is not powered on

Signal

Cellular Networks Signal strength indicator

1 Bar 2, 3 Bar 4Bar

Weak signal Moderate signal Strong signal

Wi-Fi 3G/4G

On Wi-Fi status
Off

On

Cellular Networks

status

Off

Flashing

There are 2.4GHz and 5GHz Wi-Fi signals
There are no 2.4GHz and 5GHz Wi-Fi signals The cellular network can access the internet normally The cellular network cannot access the internet
The cellular network is experiencing an issue

WAN

Wide Area Network

On Off

Connected via wired network Disconnected from wired network

The Signal light, 3G/4G light, and WAN light are all flashing. The Signal light, 3G/4G light, and WAN light are all flashing.

Restore to factory settings FOTA upgrade

150mm

2.Product overview

1 5

2

6

7

3

8

4

1.LTE extension antenna 2.Indicator status 3.Power on/off button 4.SIM card slot 5.Power port 6.Network port 7.Wi-Fi Protected Setup button 8.Reset button
3.General questions
Q: The power light doesn’t turn on when you power on the device. A: Please ensure that the power adapter is properly connected and verify that the power button is pressed.
Q: I am unable to find the Wi-Fi network. A: Firstly, check if the Wi-Fi light is on. If it is, verify if the SSID is correct or if it is set to hidden. You can make the necessary changes by logging into the management page. If the power light is on but the Wi-Fi light remains off, kindly contact customer service for further assistance.
Q: How many antennas are required for normal internet access? A: For normal internet access, four antennas are required. Please verify if they are installed correctly.

Q: How can I change the Wi-Fi name and password? A: Follow these steps to change the Wi-Fi name and password: Power on the device and connect your computer or smart terminal to the R40 using Wi-Fi or an Ethernet cable. Open a web browser and enter “192.168.169.1” in the address bar. Enter the username “admin” and password “admin” to access the management page. Navigate toNetwork->Wireless 2.4GHz/Wireless 5GHz-> Interface Settings->General Setupand locate the SSID bar. Modify the Wi-Fi name (SSID) accordingly and click “Save.”Proceed toWireless Securityto modify the password and click “Save” to apply the changes.
4.Specification
· Certification Model No.GLMR23A01 · Size17517055mm · Cellular Networks
4G LTE Theoretical Maximum Upstream: 150Mbps 4G LTE Theoretical Maximum Downlink: 600Mbps · North America LTEB2/B4/B5/B7/B12/B13/B14/B25/B26/B29/ B30/B66/B71/B41/B48 WCDMA· EU LTEB1/B3/B5/B7/B8/B20/B28/B32/B38/B40/B41 WCDMA:B1/B3/B5/B8 · JAPAN LTEB1/B3/B8/B18/B19/B26/B41 WCDMAB1/B6/B8/B19

· WLANIEEE 802.11a/b/g/n/ac · Maximum wireless connections32 · Network port1000Mbps WAN 11000Mbps LAN3 · Button: Power on/off buttonWPS ButtonRESET Button · Power input: DC12V/3A · SIM card: 2FF SIM card · Work environment
Operating temperature: 0 to +40 Storage temperature: -20 to 75 Operating humidity: 10% to 90% Storage humidity:10% to 90%

Operation frequency (Max power)

Radio WiFi 2.4G
WiFi 5G
WCDMA LTE FDD LTE TDD

Frequency

Max. power

2412-2472MHz

20dBm

5150-5250MHz

18.5dBm

5725-5850MHz

13.9dBm

Bands 1/3/5/8

25dBm

Bands 1/3/5/7/8/20/28 25dBm

Bands 38/40/41/42/43 25dBm

Note: Listed wireless data transfer rates are the theoretical maximum. The actual data transfer rate may vary depending on the network environment and carrier’s coverage.

For more information, please download the complete guide on glocalme.com/manuals. This manual is for reference only, the actual product shall prevail. The information is subject to change without notice.

RF exposure statement RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of 20 cm between the device and the human body. To maintain compliance with RF exposure requirement, use product that maintain a 20cm distance between the device and human body. The device is restricted to indoor use when operated in the European Community using frequency 5150MHz-5250MHz to reduce the potential for interference. Restriction in BE, BG, CZ, DK, DE, EE, IE, EL, ES, FR, HR, IT, CY, LV, LT, LU, HU, MT, NL, AT, PL, PT, RO, SI, SK, FI, SE, UK(NI).
EU Regulatory conformance Hereby, UCLOUDLINK (SINGAPORE) PTE.LTD declares that the radio equipment type GLMR23A01 is in compliance with Directive 2014/53/EU and this product is allowed to be used in all EU member states.The full text of the EU declaration of conformity is available atthe following internet address: www.glocalme.com
FCC Regulatory conformance This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause. Undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and complies with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur during installation. If the device does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is suggested to try to correct the interference by the following measures: –Reorient or relocate the receiving antenna. –Increase the distance between the equipment and receiver. –Connect the equipment to an outlet on a different circuit to the receiver. –Consult the manufacturer or an experienced radio/TV technician for help.

EC REP
Ocean Trading GmbH Anhalter Str.10, 10963, Berlin, Germany Tel/Mobile:0049-30/25758899 ear@oceantrading.de
UK REP
UKRPOCEAN SUPPORT LTD Amber, Office 119, Luminous House 300 South Row, Milton keynes, MK9 2FR Tel/Mobile:+447539916864 E-mail:Info@topouxun.com

Information on the disposal and recycling of the device This symbol (with or without a solid bar) on the device, batteries (if included), and/or the packaging, indicates that the device and its electrical accessories (for example, a headset, adapter, or cable) and batteries should not be disposed of as household garbage. These items should not be disposed of as unsorted municipal waste and should be taken to a certified collection point for recycling or proper disposal. For detailed information about device or battery recycling, contact your local city office, household waste disposal service, or retail store. Disposal of the device and batteries (if included) is subject to WEEE. Directive Recast (Directive 2012/19/EU) and Battery Directive (Directive 2006/66/EC). The purpose of separating WEEE and batteries from other waste is to minimize the potential environmental impacts and human health risk of any hazardous substances that may be present. Do not disassemble or modify, do not short-circuit, do not dispose in fire, do not expose to high temperature, be disable after soaking. Do not squeeze or bump the battery. Do not continue to use if serious.

For more information, please download the complete guide on glocalme.com/manuals. This manual is for reference only, the actual product shall prevail. The information is subject to change without notice.

UCLOUDLINKSINGAPOREPTE.LTD. Mail: service@ucloudlink.com Live chat: GlocalMe website / GlocalMe mobile app Hotline: +852 8191 2660 Facebook: GlocalMe Instagram: @GlocalMeMoments Twitter: @GlocalMeMoments YouTube: GlocalMe Address: 80 ROBINSON ROAD #02-00 SINGAPORE(068898)

References

• GlocalMe | Always Better Connected
• GlocalMe® Official Site- Always Better Connected. ESIM Mobile Hotspot Provider.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>