GlocalMe U3X Duoturbo Mobile Wi-Fi Hotspot User Guide
- June 14, 2024
- GlocalMe
Table of Contents
GlocalMe U3X Duoturbo Mobile Wi-Fi Hotspot
How To Use GlocalMe Cloud SIM Service?
- Download GlocalMe App
- Download and install the GlocalMe App on your mobile
- Download and install the GlocalMe App on your mobile
- Register a GlocalMe Account (in the App)
- Press【Login】–【Register】
- Follow the steps to register an account
- (You can register by email or mobile number)
- Turn on DuoTurbo
- Press and hold the power button for 3 seconds
- Press【QR code】on home page and the device QR code on the screen
- Activate DuoTurbo
- GlocalMe App 【 My Device】– 【Activate Device】
- Scan the device QR code(Step 3) on DuoTurbo
- Re-start your DuoTurbo after activation success
- Connect the Wi-Fi
- Press【Data usage SSID】on DuoTurbo and the Wi-Fi name and password
- Connect your mobile device to the Wi-Fi setting
For more information, please download the complete guide on glocalme.com/manuals. This manual is for reference only, the actual product shall prevail. The information is subject to change without notice.
How To Use A Physical SIM Card?
- Insert A SIM Card
- Please turn off your device when inserting/removing the SIM card
- Open the SIM card tray with a pin and insert the SIM card as shown in the picture below (DuoTurbo device only supports Nano-SIM cards.)
- Press SIM card manager Turn on the SIM Card Network
- Unlock the SIM Card (If PIN-protected)
- If the SIM card is PIN protected, please input the PIN on the screen to unlock the SIM card
- Set The APN Manually
- If you still cannot connect to the network after the above steps, you must add the APN manually. 【SIM card manager】–【APN】Enter the APN of your SIM card provider according to the instructions and save the setting
FCC
Warning
Specific Absorption Rate (SAR) refers to the rate at which the body absorbs RF
energy. The SAR limit is 1.6 watts per kilogram in countries that set the
limit averaged over 1 gram of tissue and 2.0 watts per kilogram in countries
that set the limit averaged over 10 grams of tissue. During testing, the
devices are set to their highest transmission levels in all tested frequency
bands, although the SAR is determined at the highest certified power level,
the actual SAR level of the device while operating can be well below the
maximum value.
EU Regulatory conformance
The device complies with RF specifications and when used with an accessory
that contains no metal and that positions the device a minimum of 0.5 cm from
the body.
The SAR limit adopted is 2.0W/kg averaging over 10 grams of tissue. The
highest SAR value reported for the device when properly worn on the body
complies with the limit.
FCC Regulatory conformance
For body-worn operation, the device complies with FCC RF exposure guidelines
when used with an accessory that contains no metal and that positions the
device a minimum of 1.0 cm from the body.
The SAR limit adopted by the FCC is 1.6W/kg averaging over 1 gram of tissue.
The highest SAR value reported for the device when properly worn on the body
complies with the limit.
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause. Undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and complies with the limits for a
class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur during
installation. If the device does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is suggested to try to correct the interference by the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the distance between the equipment and the receiver
- Connect the equipment to an outlet on a different circuit to the receiver
- Consult the manufacturer or an experienced radio/TV technician for help.
Ocean Trading GmbH Anhalter Str.10, 10963, Berlin, Germany
Tel/Mobile:0049-30/25758899
ear@oceantrading.de
UKRP: OCEAN SUPPORT LTD Amber, Office 119, Luminous House 300 South Row,
Milton Keynes, MK9 2FR Tel/Mobile:+447539916864
E-mail:Info@topouxun.com
- For the declaration of conformity, visit the website https://m.media-amazon.com/images/S/aplus-me-dia/sc/2bf27293-0552-4906-8428-f713da223dc7.pdf
- For more information, please download the complete guide on glocalme.com/manuals. This manual is for reference only, the actual product shall prevail. The information is subject to change without notice.
- Hong Kong uCloudlink Network Technology Limited E-mail: service@ucloudlink.com
- Live chat: GlocalMe website / GlocalMe mobile app Hotline: +852 8191 2660
- Facebook: GlocalMe
- Instagram: @GlocalMeMoments
- Twitter: @GlocalMeMoments
- Youtube: GlocalMe
- Address: Suit 603, 6/F, Laws Commercial Plaza
- 788 Cheung Sha Wan Road, Kowloon, Hong Kong
- Information on the disposal and recycling of the devices.
- This symbol (with or without a solid bar) on the device, batteries (if included), and/or the packaging, indicates that the device and its electrical accessories (for example, a headset, adapter, or cable) and batteries should not be disposed of as household garbage.
- These items should not be disposed of as unsorted municipal waste and should be taken to a certified collection point for recycling or proper disposal. For detailed information about the device or battery recycling, contact your local city office, household waste disposal service, or retail store.
- Disposal of the device and batteries ( if included) is subject to WEEE. Directive recast (Directive 2012/19/EU) and battery directives (Directive 2006/66/etc). The purpose of separating WEEE and batteries from other waste is to minimize the potential environmental impacts and human health risks of any hazardous substances that may be present.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>