GlocalMe HomeFlex 4G LTE Dual Band WiFi Router User Manual

GlocalMe HomeFlex 4G LTE Dual Band WiFi Router User Manual

Product Overview

Indicator status

ON/ OFF-In the power-on state, press and hold the power bLiton for rrore than 3s to shLi down; in the power-df state, press and hold the power button for more than 3s to turn ctf.

4G Indicator –

The lighl is blue when the networl< type is ‘4G L TE’ ; the light is off when other network types are selected.

Wi f i Indicator –

When there is data transmission, the indicator light blinks blue. and the indicator light is always blue when dialing or changing cards

System Indicator –

The light will flash during the system startup or upgrade. The light will stay on after the startup or upgrade is complete.
Reset- Long press the reset key for more than 6s to restore the fadory settings.

Technical Specification

Specifications

• Application Environment: Home, office, M2M, serurity

• Maximum number of wireless oonnections: 31

• CPU MT7628AN, MT7612EN

• Network Port: 3″10/100 Mbps RJ45

• Button: Power button, reset button

• Power input: DC12V/2A

• Flash Memory 16Ml/128MB

• LED System indicator, Wi-Fi indicator, 4G indicator

• S~e 12cm’8cm’18.6cm

• Antenna: 22.4G antenna, 25G antenna, 2*4G antenna

• Wireless Frequenor 2.4GHz, 5GHz

• Wireless Standards: IEEE802 11 a/blglnlac
  L TE-FDD B2I4I517I12113117I18119/25126/66 LTE-TDD: B41 WCDMA: B2/415 GSM 850/1900 Working Environment
  Operating Temperature Nomal o•c to +45°C
  Storage Temperature -20°C to +70°C
  Warning Humidity: 10% to 90%
  Storage Humidity: 10% to 90%

• Max Upload Speed 50Mbps

• Max Download Speed 150Mbps

Note:

Listed wireless data transfer rates are the theoretical maximum_ The actual data transfer rate may vary depending on the network environment and carrier’s coverage.

FAQ

1. How to deal w ith t he pro blem of being unable to access t he Inte rnet?
   a) Check whether the information entered in the connection to the CPE hotspot is inoorrect, such as username, password, etc;
   b). If the above steps cannot solve the problem, restart the CPE and try again;
   c) If the above steps cannot solve the problem, reset the CPE to factory settings and wait for the CPE to restart and try again;
   d). Contact customer serv Ice for technical support.

2. Howto deal wit h the proble m of forgetting t he CPE WIFI password?
   a). Try to login with default password s7wks68q;
   b). LogintotheCPE management background, clickNetwork->Wireless SGHz /W,reless 2.4GHz inthenav,gation bar to get theW,F, password;
   q If the CPE management interface login password is also forgotten, try to restore the factory settings. Connect to CPE WiFi with default password
   s7wks68q after factory reset.
   3. How to re store factory settings?
   a). Method 1 Press and hold the reset button for 6 seconds until all the indicators flash, release the button and wait for the CPE to restart to restore the CPE to the factory settings;
   b). Method 2: login CPE management background, in the guide bar dick on the ·system· ->·restore/upgrade·, select ·execute reser to restore factory settings

3. How to dea l w ith the problem t hat I ca n not log in to t he CPE management background?
   a). If the device is wired to the CPE, please check whether the connected network cable is connected normally;
   b). Please confirm whether the IP address of the connected device logging in to the CPE management bedground is correct. The IP address is 192.168.169.1;
   q Restore factory settings and try again. Get CPE User Manual and Management Portal Guide by visiting WNw.glocalme.oom

Warning

RF Exposure (Hea lth) Information
This equipment complies with relevant RF radiation exposure limits set forth for a publidunoontrolled environment. This equipment should be installed and’ or operated with a minimum distance of 25 an as below between the radiator and your body.

EU Reg ulatory conformance

R102FG complies with the following European directives and regulations

• 201 4I53,EU(RED)
• 2011I65/EU (RoHS)
• 2012/19/EU (WEEE)
  FCC Regulatory conformance
  This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this derive must accept any  interference received, inducting interference that may cause.
  Undesired operation. Any change modifications  and expressly approved by the party responsible compline couvade the user’s authority to operate the quitrent

Worming

RF Exposure (Health) Information This equipment complies with relevant RF radiation exposure limits set forth for a public/uncontrolled environment. This equipment should be installed and/or operated with a minimum distance of 25 cm as below between the radiator and your body.
EU Regulatory conformance R102FG complies with the following European directives and regulations.

• 2014153/EU(RED)
• 2011/65/EU (RoHS)
• 2012/19/EU (WEEE)

FCC Regulatory conformance

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause. Undesired operation. Gamechanger modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note:

This equipment has been tested and complies with the limits for a class digital device, pursuant part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and: if not installed and used in accordance with the instructions: may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur during installation_ If the device does cause harmful interference to radio or television reception, which can be determined by turning the quitrent off and on, the user is suggested to try to correct the interference by the following measures:
–Reorient or relocate the receiving antenna
. –Increase the distance between the equipment and receiver
–Connect the equipment to an outlet on different circuit to the receiver
–Consult the manufacturer or an experienced radio/TV technician for help.

Information on the disposal and recycling of the devices. This symbol (with or without a solid bar) on the device, batteries (if included), and/or the packaging, indicates that the device and its electrical accessories (for example, a headset, adapter, or cable) and batteries should not be disposed of as household garbage. These items should not be disposed of as unsorted municipal wasted and should be taken to a certified collection point for recycling or proper disposal. For detailed information about device or battery recycling, contact your local city office, housed hold waste disposal service, or retail store. Disposal of the device and batteries ( if included) is subject to W EEE. Directive recast (Directive 2012/19/EU) and battery derive (Directive 2006166lec). The purpose of separating WEEE and batteries from other waste is to minimize the potential environmental impacts and human health risk of any hazardous substances that may be present.

Contact Us

Hong Kong Cloudlink Network Technology Limited E-mail: seriice@ucloudlinkcom Hotline: +852 8191 2660 or +86 400 699 1314 (China ) Facebook: GlobalMeet Instagram: @GlocalMeMoments Twitter: @G locaI Me Moments You Tube: GlocalMe Address: SUITE 603, &’F, LAWS COMMERCIAL PLAZA, 788 CHEUNG SHA WAN ROAD, KOWLOON, HONG KONG

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>