blue built BBMAG1UM Monitor Arm with Mechanical Spring 1 Ultrawide Monitor Instruction Manual

: June 1, 2024
: blue built

Table of Contents

SET UP MONITOR ARM.
CHECKLIST.
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

blue built BBMAG1UM Monitor Arm with Mechanical Spring 1 Ultrawide Monitor

blue-built-BBMAG1UM-Monitor-Arm-with-Mechanical-Spring-1-Ultrawide-Monitor-
product

Product Specifications

Product Name: Monitor Arm with Mechanical Spring for 1 Ultrawide Monitor
Model Number: 935000 – BBMAG1UM
Version: V1.1
Mounting Options: Clamp mount (A) & Feed-through mount (B)
Compatible Monitor Size: Ultrawide
Desk Thickness Compatibility: 10mm to 80mm

Feed-through Mount Setup

Step 1: Drill a 10mm hole through your desk.
Step 2: Place the mounting plate 7 around the feed-through mount and screw it into the stand via the hole.
Step 3: Attach the swivel arm 1 to the stand and tighten the screw.
Step 4: Attach the lift arm 2 and tighten the screw.
Step 5: Attach the VESA plate 3 to the monitor arm and tighten the screw 9.
Step 6: Place the clamp on the desk and tighten the screw upwards until the stand is fastened tightly.
Step 7: Unscrew the desk clamp 5 from the clamp attachment and attach the triangular mounting plate 7 to the bottom of the stand.
Step 8: Place your monitor on a rug, insert the top screws 11 into the monitor, then slide it onto the VESA plate and secure with bottom screws 11.
Step 9: Slide the cable duct upwards, place monitor cables inside, and close it.
Step 10: Adjust the connector of the monitor arm using the included hex key 10 for flexibility.

Frequently Asked Questions (FAQ):
Q: What is the recommended thickness range for desk compatibility?
A: The monitor arm is suitable for desks with a thickness between 10mm and 80mm.

FLYING START.
Whoooo.

Monitor Arm with Mechanical Spring for 1 Ultrawide Monitor
Monitorarm met Mechanische Veer voor 1 Ultrawide Monitor
Bras d’Écran PC avec Ressort Mécanique pour 1 Écran PC Ultralarge Monitorhalterung mit Mechanischer Feder für 1 Ultrawide-Monitor

$blue-built-BBMAG1UM-Monitor-Arm-with-Mechanical-Spring-1-Ultrawide-Monitor- $2$$

SET UP MONITOR ARM.

A helping hand.

$blue-built-BBMAG1UM-Monitor-Arm-with-Mechanical-Spring-1-Ultrawide-Monitor- $3$$

In the box

Swivel arm
Lift arm
VESA plate
Stand
Clamp
Protective plate
Mounting plate
Socket head bolts
Socket head bolt and nut
Hex keys 4, 5, and 6mm
Screws and washers
From your own toolbox:
Screwdriver 13 Drill

CHECKLIST.

Does the tick.

Check the VESA size of your monitor. That way, you can be sure it fits on the monitor arm. The screw holes of the VESA plate and your monitor have to match.

Do you have a question?
Coolblue.nl/en/ customer-service

Coolblue isn’t liable for any injury, damage, or arguments with your partner caused by a wrong installation.

Suitable for desks with a thickness between 10 and 40mm.
Attach the plastic protective plate 6 to the clamp attachment 5 .
Attach the clamp attachment to the stand 4 and tighten the bolts 8 .
Determine the thickness of your desk. Depending on that, you place the desk clamp 5 in the upper or lower notches and tighten the bolts.
$blue-built-BBMAG1UM-Monitor-Arm-with-Mechanical-Spring-1-Ultrawide-Monitor- $4$$
Place the clamp on the desk and tighten the screw upwards until the stand is fastened tightly.
Suitable for desks with a thickness between 40 and 80mm.
Unscrew the desk clamp 5 from the clamp attachment. Unscrew the disc from the clamp and then unscrew the clamp attachment from the clamp.
Screw the triangular mounting plate 7 to the bottom of the stand.
$blue-built-BBMAG1UM-Monitor-Arm-with-Mechanical-Spring-1-Ultrawide-Monitor- $6$$ Drill a 10mm hole through your desk.
Place the mounting plate 7 around the feed-through mount. Then screw it into the stand via the hole until it’s fastened tightly.
Attach the swivel arm 1 to the stand. Tighten the screw to your liking. The tighter the screw, the less flexibly the arm can move.
Attach the lift arm 2 . Tighten the screw to your liking.
Attach the VESA plate 3 to the monitor arm and tighten the screw 9 . $blue-built-BBMAG1UM-Monitor-Arm-with-Mechanical-Spring-1-Ultrawide-Monitor- $7$$
Place your monitor on a rug and insert the top screws 11 into the monitor. You can use the washers 11 to make it sturdier.
Slide the monitor onto the VESA plate and screw the bottom screws 11 into the monitor.
Slide the cable duct upwards to open it. Put the cables of your monitor inside and close it again.
Adjust the connector of the monitor arm with the included hex key 10 to determine the flexibility.
$blue-built-BBMAG1UM-Monitor-Arm-with-Mechanical-Spring-1-Ultrawide-Monitor- $1$$