blue built Era 100 Adjustable Stand for Sonos User Manual

blue built Era 100 Adjustable Stand for Sonos

What’s In The Box

In the box:

1. Base plate,

2. Bar,
   

3. Fixing plate,

4. Speaker holder,

5. Spikes,

6. Upright feet,

7. Screws,

8. Bolts,

9. Allen key 1.5 millimetres,

10. Allen key 3 millimetres

From your own box:

11. Spirit level,

12. Pencil,

13. Crosshead screwdriver

CHECKLIST

You’re 50% there.

Horizontal installation:
Make sure that the speaker stand is level. This improves the sound quality of the speaker.

Loadability:
Use the stand only for speakers with a maximum weight of 6 kilograms.

Do you have a question?
Coolblue.nl/en
customer-service

Coolblue is not liable for any injury, damage or bickering with your friend caused by an incorrect installation.

Installations Steps

1. Screw the stand feet 6 into the bottom of the base plate 1 . Are you installing the stand on carpet? Then use the spikes 5 .
   

2. Attach the rod 2 with the slot towards the back to the base plate using the bolts 8 and the supplied Allen key 10 .

3. Unscrew the lower screw from the rod. You don’t need to put these back. Loosen the top 2 screws in the rod with the Allen key 9 to adjust the height of the rod. Then retighten the 2 screws.
   

4. Place the mounting plate 3 on the rod and screw into place.

5. Secure the speaker holder 4 with the screws. Place the notch towards the back.
   This is where you will later feed the cable through.

6. Place the stand in a spot of your choice and then put the speaker on it. Feed the cable through the groove at the back of the post.

BlueBuilt is a registered trademark of Coolbue B.V., Weena 664, 3012 CN Rotterdam, The Netherlands.

References

• Coolblue - anything for a smile
• Klantenservice - Coolblue - alles voor een glimlach

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>