blue built 940934 Ultra Slim Wall Mount Instruction Manual
- June 1, 2024
- blue built
Table of Contents
blue built 940934 Ultra Slim Wall Mount
Product Specifications
- Model Numbers : 940934 – BBUSWM3255, 940935 – BBUSWM5585
- Mount Type : Ultra Slim Wall Mount
- Compatibility: Suitable for TVs with VESA mounting patterns
Product Usage Instructions
Step 1: Get your TV ready
Place your TV screen down on a rug and identify the screws from bag A that fit your TV.
Step 2: Mount the TV frames
Attach the TV frames to the TV by aligning the holes with the VESA size of your TV. Use spacers if needed.
Step 3: Measure the distance
Clamp the wall plate onto the frames and measure the distance from the bottom of the TV to the drill holes in the wall plate.
Step 4: Determine the location
Mark the height on the wall where you want to mount your TV. Use a screw with a ring to mark the upper and lower holes on the frames.
Step 5: Mark the height
Draw an X on the wall at the desired height for the bottom of your TV.
Step 6: Drill the holes
Drill holes in the wall at the marked locations using a 5mm drill followed by a 10mm drill. Insert plugs into the holes.
Step 7: Mount your TV
Attach the TV to the wall plate using screws from bag B. Ensure the TV is level.
Step 8: Neatly store away the strings
Pull down the strings to secure the television. Store away excess strings using the magnetic bottom.
Step 9: The final details
Tighten the bolts with a hex key for a level installation. Coolblue recommends consulting a professional installer if unsure about installation.
FAQ
- Q: How can I check for pipes or cables behind the wall before drilling?
- A : Use a wall scanner to check for any obstructions before drilling. Avoid cutting any wires as they may be necessary when removing the TV.
- Q: What tools are required for installation?
- A : You will need a cross-head screwdriver, wall scanner, 5mm drill, 10mm drill, pencil, tape measure, hammer, impact drill or concrete drill, and a cup of coffee for a successful installation.
- Q: Can I install the wall mount by myself?
- A : While it is possible to install it yourself if in doubt, it is recommended to seek assistance from a professional installer to ensure proper installation and safety.
In the box
Brace yourself
- TV frame
- Wall plate with spirit level
- Bag A : rings and spacers for the TV
- Bag B : hex key, screws, and plugs for the wall
- Installation template
- From your own toolbox:
- Cross-head screwdriver
- Wall scanner
- 5mm drill
- 10mm drill 1
- Pencil
- Tape measure
- Hammer
- Impact drill or concrete drill 14 Cup of coffee
CHECKLIST
Does the tick
Suitable surfaces:
- Solid brick
- Solid concrete
- Drywall with wooden pillars behind it
Before drilling:
Use the wall scanner to check if there aren’t any pipes or cables behind the wall.
Warning!
Don’t cut the wires. You need them when you want to take your TV off the wall.
Do you have a question?
Coolblue.nl/en/customer-service
Coolblue isn’t liable for any injury, damage, or arguments with your partner caused by a wrong installation. In doubt if you can do this yourself? Ask a professional installer.
INSTALLATION
- Place your TV with the screen down on a rug. Find which screws in bag A 3 fit your TV. You only need 1 set.
- First, place a screw with a ring in the upper hole of the frame 1 . Do the same thing with the bottom screw and place it in the hole that aligns with the VESA size of your TV. Place a spacer (from bag A) when you have extra space.
- Clamp the wall plate 2 onto the frames and measure the distance from the bottom of the TV to the drill holes in the wall plate.
- Determine the location of your TV on the wall and draw out where you want the bottom of your TV to be. Move up with the same distance you just measured and draw an X.
- Mark the 4 drill holes of the wall plate 2level at the height of the X you drew. Use the template 5 to make it easier.
- Drill holes in your wall. For extra accuracy, first use the 5mm drill 8 and then the 10mm drill 9 . Then, hammer the plugs from bag B 4 into the holes.
- Fix the wall plate 2 level to the wall with the screws from bag B 4 . Lift the TV with 2 people and attach it to the wall plate. Pull the strings down to lock the television
- Easily store away the strings thanks to the magnetic bottom.
- Use the hex key from bag B 4 to tighten the bolt, so you can place the TV completely level
- BlueBuilt is a registered trademark of Coolbue B.V., Weena 664, 3012 CN Rotterdam, The Netherlands.