blue built 934999 Monitor Arm for 2 Monitors Installation Guide

blue built 934999 Monitor Arm for 2 Monitors

Specifications

• Product Name: Monitor Arm for 2 Monitors
• Model Number : 934999 – BBMA2M
• Version: V1.0
• Compatible Desk Thickness: 10-85mm for clamping attachment, 10-40mm for feed-through fixation

Product Usage Instructions

Installing the Monitor Arm:
To install the monitor arm, follow these steps:

• Step 1:
  Place the base (5) on the rod (6) and tighten it with screw (8).

• Step 2A – Clamping Attachment:
  Attach the clamp (3) to the desk depending on the desk thickness.

• Step 3A – Clamping Attachment:
  Place the connection angle (4) on the base and secure it with screws.

• Step 4A – Clamping Attachment:
  Secure the base with the clamp.

• Step 2B – Feed-through Fixation:
  Drill a hole in the desk and pass the clamp through it.

• Step 3B – Feed-through Fixation:
  Place the fixing plate (3) around the feedthrough and secure it.

• Step 4B – Feed-through Fixation:
  Secure the monitor arms (2) on the rod (6) using the Allen key (10).

• Step 5:
  Attach cable clips (7) on the arms and rod for cable management.

• Step 6:
  Mount the monitors on the VESA plate (1) using screws (11).

• Step 7:
  Tighten all screws and adjust the torque of the monitor arm.

• Step 8:
  Secure the base by placing the clamp on the desk and tightening it.

• Step 9:
  Drill a hole through the desk for feed-through fixation.

• Step 10:
  Mount the monitor onto the VESA plate and secure with screws.

• Step 11:
  Tighten all caps with a screwdriver and organize cables through clips.

FAQ

• What is the compatible desk thickness for this monitor arm?
  The monitor arm is suitable for desks between 10 and 85 millimeters thick for clamping attachment and between 10 and 40 millimeters thick for feed- through fixation.

• How can I ensure my monitor fits on the arm?
  Check the VESA size of your monitor to ensure compatibility. The screw holes on your monitor must align with the VESA plate of the arm.

INSTALLATION OPTIONS

• Clamping attachment (A)
  Attach your monitor arm to your desk with the clamp.

• Feed-through fixation (B)
  Drill a hole in your desk and pull the clamp through it.

BOX CONTENT

1. Vesa Plates,
2. Monitor arm,
3. Clamp,
4. Connection angle,
5. Base,
6. Bar,
7. Cable clips,
8. Allen Bolts,
9. Caps,
10. Allen keys,
11. Screws and rings

From your own box:

• 12 Screwdriver,
• 13 Drill

CHECKLIST.

You’re 50% there.

• Check the VESA size of your monitor. Then you know whether it fits on the monitor arm. The screw holes must match between the VESA plate and your monitor.
• Do you have a question? Coolblue.nl/en customer-service
• Coolblue is not liable for any injury, damage or bickering with your friend caused by an incorrect installation.

INSTALLATION INSTRUCTION

• STEP 1.
  Place the base 5 on the rod 6 and tighten it with the screw 8 .

• STEP 2A Clamping attachment.

  • Suitable for desks between 10 and 85 millimetres thick.
  • Place the connection angle 4 on the other side of the base and screw it tight.

• STEP 3A. Clamping attachment
  Determine the thickness of your desk. Depending on this, place the desk clamp 3 in the top or bottom recesses and tighten the bolts 8.

• STEP 4A. Clamping attachment
  Place the clamp on the desk and turn the screw upwards so that the base is firmly secured.

• STEP 2B Feed-through fixation.

  • Suitable for desks between 10 and 40 millimetres thick.
  • Unscrew the disc from the clamp 3 and unscrew the connection angle 4.

• STEP 3B Feed-through fixation.
  Drill a 10-millimetre hole through your desk.

• STEP 4B Feed-through fixation.
  Place the fixing plate 3 around the feed-through. Then screw it through the hole into the base until it is firmly secured.

• STEP 5.
  Place the monitor arms 2 on the rod 6 and tighten it firmly with the Allen key 10 . Make sure that the VESA fasteners are upright.

• STEP 6.
  Click the cable clips 7 on the arms and the rod.

• STEP 7.
  Put your monitors on a cloth and place the top screws 11 in the monitors. Use the washers 11 as an option for extra reinforcement.

• STEP 8.
  Slide the monitor onto the VESA plate 1 and screw the lower screws 11 into the monitor.

• STEP 9.
  Tighten the caps 9 with a screw and screwdriver.

• STEP 10.
  Feed your cables through the clips to tidy them up.

• STEP 11.
  Adjust the torque of the monitor arm with the Allen key 10 provided to determine the smoothness.

References

• Coolblue - tout pour un sourire
• Kundendienst | Coolblue - Kostenlose Lieferung & Rückgabe
• Coolblue - anything for a smile

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>