dyras PSW866-AT Articulating TV Wall Mount Instruction Manual
- June 1, 2024
- dyras
Table of Contents
PSW866-AT
Instruction manual
Articulating TV Wall Mount
Model: PSW866-AT
Please carefully read the instructions before using!
IMPORTANT INFORMATION
This product contains small items that could be a choking hazard if swallowed.
Keep these items away from young children.
Make sure these instructions are read and completely understood before
attempting installation. If you are unsure of any part of this installation,
please contact a professional installer for assistance.
The wall or mounting surface must be capable of supporting the combined weight
of the mount and the display, otherwise the structure must be reinforced.
Safety gear and proper tools must be used. A minimum of two people are
required for this installation. Failure to use safety gear can result in
property damage, serious injury or death.
Please check joint parts every two months, making sure the screws are loosened
or not.
This product was designed to be installed on wood stud walls and solid
concrete walls. Before installing, make sure the wall will support the
combined load of the equipment and hardware. Never exceed the maximum load
capacity 25 kg, or else it may result in product failure or personal injury.
Note: This product is intended for indoor use only. Use of this product
outdoors could lead to product failure or personal injury.
SPARE PARTS
- Wall plate
- TV plate
- Magnetic removable bubble level
- Bracket
Step1: Solid concrete mounting
- Magnetic removable bubble level
- Concrete wall
Wood Stud Mounting
- Wood stud
- Magnetic removable bubble level
Step2: Attaching Brackets to screen
Step3: Hang the TV onto the wall plate
- Fal
- TV plate
- Bracket
Tighten or loosen the screw to adjust the tilt angle
WASTE MANAGEMENT
Correct Disposal of this product
| This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
Manufacturer/Importer: Vörösk Kft., 8200 Veszprém, Pápai str. 36.
Copyright © 2023 The dyras wwe.factory LLC U.S.A.
No parts of the content (including logos, design, photos, text, colour scheem arrangements, etc.) may be reproduced, reused or redistributed for any purpose whatsoever, or distributed to a third party for such purposes, without the written permission of The dyras wwe.factory LLC.
®= registered trademark of Dyras Europe Kft.