RS PRO V8534 Breaking Torque Handles Instruction Manual
- June 4, 2024
- RS PRO
Table of Contents
RS PRO V8534 Breaking Torque Handles
Adjustment
-
Engage the 1/4″ square drive into the appropriate RS Torque Analyser and slowly apply torque in a clockwise direction until the handle ‘breaks’. Note the reading.
-
Remove handle from Analyser and using hexagon key provided remove handle end cap.
-
Insert 3mm hexagon key into grub screw in the end of the adjusting screw. Turn grub screw 1/4 turn ‘anti-clockwise’ to unlock existing torque setting. Insert black adjusting key into handle of tool and engage adjusting screw. Rotate using 5 mm hexagon key. Turn ‘clockwise’ to increase or’anticlockwise’ to decrease torque.
Do not unscrew beyond 6mm of end of handle.
When set correctly, ‘lock’ torque setting by re-inserting 3mm hexagon key into grub screw and turn ‘clockwise’.
Do not attempt to adjust torque setting without first releasing the lock. -
Re-check torque setting.
Use
- Adjust torque handle to required torque setting, using adjustment procedure above.
- Always hold torque handle by plastic grip.
- Apply a steady even pull until the handle ‘breaks’. As the tool features a 20° ‘break angle’ and will reset automatically after each application. A break angle of 90° can be achieved by removing the restriction collar. In this case the end fitting must be pushed back by finger pressure. Maximum break angle is 90° -do not exceed.
- This tool operates in a clockwise and anti-clockwise direction.
Maintenance
- Your ‘breaking’ torque handle is a precision tool and should be handled carefully at all times.
- No routine maintenance is required, but keep tool exterior clean and dry and occasionally lubricate pivot area of handle.
RS Components shall not be liable for any liability or loss of any nature (howsoever caused and whether or not due to RS Components’ negligence) which may result from the use of any information provided in RS technical literature.
Instructions
GENERAL INSTRUCTIONS
Documents / Resources
| RS
PRO V8534 Breaking Torque
Handles
[pdf] Instruction Manual
V8534 Breaking Torque Handles, V8534, Breaking Torque Handles, Torque Handles,
Handles
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>