dyras CNSL-652B Adjustable Wall Mount Installation Guide
- June 1, 2024
- dyras
Table of Contents
dyras CNSL-652B Adjustable Wall Mount Installation Guide
CNSL-652B
Instruction manual
Adjustable Wall Mount
Model: CNSL652-B
Please carefully read the instructions before using!
IMPORTANT INFORMATION
This product contains small items that could be a choking hazard if swallowed. Keep these items away from young children.
Make sure these instructions are read and completely understood before attempting installation. If you are unsure of any part of this installation, please contact a professional installer for assistance.
The wall or mounting surface must be capable of supporting the combined weight of the mount and the display, otherwise the structure must be reinforced.
Safety gear and proper tools must be used. A minimum of two people are required for this installation. Failure to use safety gear can result in property damage, serious injury or death.
Please check joint parts every two months, making sure the screws are loosened or not.
This product was designed to be installed on wood stud walls and solid concrete walls. Before installing, make sure the wall will support the combined load of the equipment and hardware. Never exceed the maximum load capacity 25 kg, or else it may result in product failure or personal injury.
Note: This product is intended for indoor use only. Use of this product outdoors could lead to product failure or personal injury.
Accessories
- Magnetic removable bubble level
- TV plate
- Cable ducting
- Wall plate
Step 1: Solid concrete mounting
- Concrete wall
- magnetic removable bubble level
Step2: Attaching the VESA plate to the monitor
If the VESA hole of your TV is shallow, please prepare some short screws by
yourself.
For TV-s with a curved back or obstruction
Step3: Hang the TV onto the wall plate
Step4: Tighten the left screws, and tighten or loose the right screws on TV plate to adjust the tilting angle.
WASTE MANAGEMENT
Correct Disposal of this product
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
Manufacturer/Importer: Vöröskő Kft., 8200 Veszprém, Pápai str. 36.
Copyright © 2023 The dyras wwe.factory LLC U.S.A.
No parts of the content (including logos, design, photos, text, colour scheem arrangements, etc.) may be reproduced, reused or redistributed for any purpose whatsoever, or distributed to a thirdparty for such purposes, without the written permission of The dyras wwe.factory LLC.
®= registered trademark of Dyras Europe Kft.