dyras CHR-HC30 Wireless Car Charger and Holder Instruction Manual

October 30, 2023
dyras

dyras CHR-HC30 Wireless Car Charger and Holder Instruction Manual
dyras CHR-HC30 Wireless Car Charger and Holder

PRODUCT DESCRIPTION

Wireless car holder/gravity car dashboard/window holder/air vent Easy to use.
Rotates 360° degrees, keeps stable the devices.
Strong gel-type absorption panel can be attached to dashboard as well as windshield glass.
Fit to 4-7” inches devices.
Compatible with cordless suitable phones.
Micro USB input

SPECIFICATION

  • Input: DC5V,2A 12V,1.2A(QC3.0/2.0)
  • Output: DC 5V/1A, 5V /1.5A, 9V/1.1A (5W,7.5W,10W)
  • Transmission Distance: ≤ 8 mm
  • Charging efficiency: 83% max
  • Frequency: 110-205KHZ Over current protection, over voltage protection and foreign object detection
  • Operating temperature: -10 °C- +40 °C
  • Material: Plastic
  • Product weight: 248 g
  • Colour: Black

CONTENTS OF BOX

  • air vent parcel
  • gel-type absorption panel
  • part of holding device
  • Micro USB cable

HOW TO USE

Unscrew the mounting ring, insert the ball through the mounting ring, then position your preferred angle and tighten the ring to secure the mount.
HOW TO USE

Place the holder on the dashboard
Insert the car charger into the vehicles 12V power socket. Connect the wireless charger and car charger by cable.

Place your phone inside the part of holding device.
Start charging the phone when the indicator light of wireless charger turns to blue.

THE LED INDICATOR

  1. The indicator light turns to blue when start charging the phone
  2. The indicator light turns to green when full charging
    LED INDICATOR

CAR DASHBOARD HOLDER BASE

After repeated use many times, if the gel sticker surface dirt too much, and it can’t attached the device strongly, this gel sticker can be cleaned by water and washing ,it can be repeated use after cleaning and dry.
DASHBOARD HOLDER BASE

WARNING!

  1. Please do not disassemble the product yourself!
  2. Please do not place the product near heat sources!
  3. Please do not place the product close to water, into water or in damp places!
  4. The product is designed for phone holder usage. Please do not use it for anything else!
  5. For the safety of children, do not allow play with the device, avoiding unnecessary accidents.

WASTE MANAGEMENT

Correct Disposal of this product

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

Manufacturer/Importer: Vöröskő Kft., 8200 Veszprém, Pápai str. 36.

THE CE SYMBOL

The mark is intended to indicate that the product complies with the relevant European Union standards and can be freely marketed in the European Union.

dyras logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals