U-tec UP01 Smart Plug User Guide
- June 12, 2024
- U-tec
Table of Contents
U-tec UP01 Smart Plug
Product Information
The Smart Plug (V2.0) by U-tec is a versatile device that allows you to control the power supply to your electronic devices remotely. It offers three working modes – Smart Mode, Child Mode, and Standalone Mode. The plug is equipped with a status indicator, setting button, and power switch for easy operation. It alsosupports integration with popular voice assistants such as Amazon Alexa, Google Assistant, IFTTT, and SmartThings.
What’s in the Box
- 1x Smart Plug
- 1x Quick Guide
Technical Specifications
- Model: UP01
- Input: 100-130V~, 60Hz, 15A
- Output Communication: 120V~, 15A Maximum load
- WiFi: 802.11 b/g/n 2.4 GHz
- Bluetooth: 5.0 Mesh
- Operating Humidity: 95%
- Weather resistant: Indoor Use Only
More Ways to Control
The Smart Plug can be integrated with Amazon Alexa, Google Assistant, IFTTT, and SmartThings when set up in the U-tec App.
FCC Compliance Information Statement
This equipment complies with the limits for a Class B digital device as per part 15 of the FCC Rules. It has been tested and designed to provide reasonable protection against harmful interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If interference is experienced, the user is encouraged to try the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for assistance.
Product Usage Instructions
Use it in Smart Mode
- Search for “U-tec” in the App Store (iOS) or Google Play (Android) and download the app.
- Create an account and log in to the app.
- Select the “+” icon in the app’s main interface to add the new Smart Plug device.
- Follow the app’s instructions to complete the setup process.
- Once set up, you can use the app to remotely control the power ON/OFF of the Smart Plug.
Use it in Child Mode
In Child Mode, the Smart Plug can only be controlled through the app. To enable Child Mode:
- Go to the settings page in the app.
- Enable the Child Lock feature.
Use it in Standalone Mode
In Standalone Mode, the Smart Plug functions as a regular plug without any app control. To use it in Standalone Mode:
- Press and hold the Setting Button on the Smart Plug for 5 seconds to reset it.
- Do not set it up using the app.
- Simply use it as a common plug, manually turning the power ON/OFF using the Power Switch.
Note : For detailed instructions and troubleshooting, refer to the User Guide available at www.u-tec.com/power/plug/guide or scan the provided QR code.
First, a word about privacy.
Before using all U-tec products, please read all applicable terms, rules, policies and usage provisions found at www.u-tec.com/company/privacy. By using your device, you agree to be bound by the U-tec Privacy Policy
What’s in the Box
- 1x Smart Plug
- 1x Quick Guide
Need Help?
For technical documents and more
Please visit https://support.u-tec.com
Product Outline
Setting Button
- Power Switch Press to turn the smart plug ON or OFF. If the Child Mode is enabled in App, the Power Switch will be disabled.
- Reset Press and hold the Button for about 5 seconds and release it, the indicator flashes green slowly.
Status Indicator
-
Flashing green slowly
The plug is waitting for your setting. If you don’t set it up in 5 minutes, it will come into Standalone
Mode and power off. -
Solid green
The plug loses WiFi connection in Smart Mode.
The plug is ON in Standalone Mode. -
Flashing green and blue
The plug is in Child Mode.
Solid blue The plug is ON and connects to WiFi succesfully in Smart Mode. -
Light goes off
The plug is OFF in all Mode or you turn off the indicator in App.
Working Mode
Technical Specifications
- Model UP01
- Input 100-130V~, 60Hz, 15A
- Output 120V~, 15A Maximum load
- Communication WiFi 802.11 b/g/n 2.4 GHz
- Bluetooth 5.0 Mesh
- Operating Temperature -4°F – 104°F / -20°C – 40°C
- Operating Humidity: ＜95%
- Weather resistant Indoor Use Only
Online User Guide
Scan QR code to view the User Guide or view: www.u-tec.com/power/plug/guide
Use it in Smart Mode
Search “U-tec” in APP Store (iOS) or Google Play (Android) and download App.
Scan QR code to download the App
Get U-tec App Ready
- Search “U-tec” in APP Store (iOS) or Google Play (Android)
- Download App
- Create Account and Log in
Add New Smart Plug Device
Select the “+” icon in the App main interface to add the new device, then
follow the App instructions to finish the setup process.
Power ON/ OFF
- Control by App
- Press Setting Button
Use it in Child Mode
Go to the setting page and enable the Child Lock.
Power ON/ OFF
Only control by App.
Use it in Standalone Mode
Please press the Setting Button for 5 seconds to reset the smart plug. Don’t set it up by App. Just use it as a common plug.
Power ON/OFF
Only by Setting Button.
More Ways to Control
Smart Plug also supports working with Amazon Alexa, Google Assistant, IFTTT, and SmartTings when the device is set up in the U-tec App.
FCC compliance information statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note : The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This device and its antenna must not be co-located
or operating in conjunction with any other antenna or transmitter To comply
with FCC RF exposure compliance requirements, this grant is applicable to only
Mobile Configurations. The antennas used for this transmitter must be
installed to provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with any other antenna
or transmitter.
We, U-tec Group Inc. , have determined that the equipment shown above has been
shown to comply with the applicable technical standards, FCC part 15. There is
no unauthorized change made to the equipment and the equipment is properly
maintained and operated
Canadian Compliance Statement
This device complies with Industry Canada license-exempt RSSs. Operation is
subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)
- FCC ID : 1234567890ASDF
- IC ID : 1234567890ASDF
Safety Information
Keep the device away from water, fire, humidity or hot environments.
- Do not attempt to disassemble, repair, or modify the device.
- Do not use the device where wireless devices are not allowed.
Please read and follow the above safety information when operating the device.
We cannot guarantee that no accidents or damage will occur due to improper use
of the device. Please use this product with care and operate at your own risk.
© 2023 U-tec Group Inc. U-tec brands and products are trademarked and
protected under law in the United States. Unauthorized use is prohibited.