dyras SM-2011B Stand Mixer Instruction Manual
- June 1, 2024
- dyras
Table of Contents
dyras SM-2011B Stand Mixer Instruction Manual
GENERAL SAFETY INSTRUCTION
Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the internal packing. If you give this device to other people, please also pass on the operating instructions.
- The appliance is designed exclusively for private use and for the envisaged purpose. This appliance is not fit for commercial use. Do not use it outdoors (except if it is designed to be used outdoors). Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges. Do not use the appliance with wet hands. If the appliance is humid or wet, unplug it immediately.
- When cleaning or putting it away, switch off the appliance and always pull out the plug from the socket (pull on the plug, not the cable) if the appliance is not being used and remove the attached accessories.
- Do not operate the machine without supervision. If you should leave the workplace, always switch the machine off or remove the plug from the socket (pull the plug itself, not the lead).
- Check the appliance and the cable for damage on a regular basis. Do not use the appliance if it is damaged.
- Do not try to repair the appliance on your own. Always contact an authorized technician. To avoid the exposure to danger, always have a faulty cable be replaced only by the manufacturer, by our customer service or by a qualified person and with a cable of the same type.
- Use only original spare parts.
- In order to ensure your children’s safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach.
- Caution! Do not allow small children to play with the foil as there is a danger of suffocation!
- In order to protect children or frail individuals from the hazards of electrical equipment, please ensure that this device is only used under supervision. This device is not a toy. Do not allow small children to play with it.
- Only operate this machine under supervision.
- Do not insert anything into the rotating hooks while the machine is working.
- Place the machine on a smooth, flat and stable working surface.
- Do not insert the mains plug of the machine into the power socket without having installed all the necessary accessories.
MAIN COMPONENTS AND STANDARD ACCESSORIES
- Body
- Stainless steel bowl
- Locking press button
- Switch knob
- Dough hook
- Whisk
- Beater
USING THE MIXING BOWL
- Place the mixing bowl into its holding device and turn the bowl until it locks into place.
- In order to lift the arm, push the Locking press button down. The arm will now move upwards.
- Mount the required utensil by inserting the top into the output shaft and locking.
- Now fill in your ingredients.
- Do not overfill the machine – the maximum quantity of ingredients is 1.2 kg.
- Lower the arm using the Locking press button.
- Insert the mains plug into a properly installed 230 V/50 Hz safety power socket.
- Switch the machine using the speed button to a speed between 1 and 6.
- For pulse operation (kneading at short intervals), turn the switch to the “PULSE” position. The switch has to be held in this position according to the desired interval length. When the switch is released it returns automatically to the “0” position.
Adjusting the levels and using the hook for not more than 1.2 kg of Mixture.
** Levels Use| Type of Mixture**
---|---
1-2 Dough hook| Heavy mixtures(e.g. bread or short pastry)
3-4 Beater| Medium-heavy mixtures(e.g. crepes or sponge mixture)
5-6 Whisk| Light mixtures (e.g. cream, egg white, blancmange)
Pulse| Whisk Interval (e.g. for mixing under sponge, egg white)
Short operation time: With heavy mixtures, do not operate the machine for more than six minutes, and then allow it to cool down for a further fifteen minutes.
- After kneading/stirring turn the speed knob back to the “0” position as soon as the mixture has formed a ball. Then remove the mains plug.
- The mixture can now be released with the help of a spatula and removed from the bowl.
- Press the Locking press button downwards and the arm will be raised.
- The mixing bowl can now be removed.
- Clean the parts as described under “Cleaning”.
CLEANING
- Before cleaning remove the mains lead from the socket.
- Never immerse the housing with motor into water!
- Do not use any sharp or abrasive detergents.
Motor Housing:
- Only a damp rinsing cloth should be used to clean the outside of the housing.
Mixing Bowl, Mixing Equipment:
- Components that have come into contact with food can be cleaned in soapy water.
- Allow the parts to dry thoroughly before reassembling the device.
CAUTION: Only the dough hook, whisk and beater suitable for cleaning in a dishwasher. If exposed to heat or caustic cleaners they might become misshapen or discoloured.
TECHNICAL SPECIFICATIONS
Model: SM-2011B
Rated voltage: 220-240V~,
Rated frequency: 50/60Hz
Power consumption: 1000W
Protection class: II.
WASTE MANAGEMENT
Correct Disposal of this product
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
Manufacturer/Importer: Vöröskő Kft., 8200 Veszprém, Pápai str. 36.
CE SYMBOL
The mark is intended to indicate that the product complies with the relevant European Union standards and can be freely marketed in the European Union.
DEAR CUSTOMER!
Please note that the following operating, storage, environmental, and environmental conditions may affect the lifetime and usability of the device, and may adversely affect, shorten, or prolong its life if not permanently or temporarily.
Always protect your device from the following:
- Use or storage in a humid, damp environment may cause:
- premature aging of the device’s enclosure,
- electrical insulation,
- premature wear and aging of the structural components of plastics and rubber
- Improve, accelerate the corrosion of electrical units, wires oxidation, metal parts.
- Use in dusty environments or in kitchens (where the atmosphere is exposed to, for example, cooking oil or cooking fat) may cause:
- Deposition of greasy powder coating on the mechanical and electrical components and casing of the unit, which can cause electrical contact failure, even total malfunction, and damage to plastic and rubber components.
- Direct sunlight can cause:
- Premature aging of the device casing, plastic and rubber parts, deterioration of strength and other structural features, porosity and brittleness of their surface, which may endanger proper, safe use.
- Continuous industrial use may cause:
- Premature structural wear due to forced operation of the device, premature engine wear,
- damage due to continuous wear and overheating.
- Device storage in freezing cold conditions may cause:
- Structural damage or breakage of plastics and rubber parts which endangers the intended safe use,
- Oxidation due to condensation, corrosion of metal parts of the device.
- Can be caused by radiation or direct heat (such as providing an inappropriate distance from the stove, radiator):
- structural damage, deformation, deformation, softening, melting, weakening of electrical insulation of plastic and rubber parts, coverings.
To prolong the life of the device and prevent improper use, avoid or prevent the above conditions and always follow the product operating instructions, otherwise you will be responsible for improper operation for which the manufacturer assumes no responsibility. We recommend that you have your appliance periodically inspected by an authorized service centre, even if you do not experience any malfunctions, as this may help you troubleshoot an early-stage problem and increase the life of your product.
