COSMO COSUC30DL Under Cabinet Range Hood Installation Guide

Under Cabinet
Range Hood

Under Cabinet Range Hood
UC & UMC series

Installation Guide & User Manual
IMPORTANT: Read and save these instructions.
NOTICE: Installer: Leave this guide with the homeowner Homeowner: Keep this guide for future reference Rev. 23.06
THANK YOU FOR YOUR PURCHASE
Thank you for your purchase. We know that you have many brands and products to choose from and we are honored to know that you have decided to take one of our products into your home and hope that you enjoy it.
COSMO appliances are designed according to the strictest safety and performance standard for the North American market. We follow the most advanced manufacturing philosophy. Each appliance leaves the factory after thorough quality inspection and testing. Our distributors and our service partners are ready to answer any questions you may have regarding how to install, use and care for your products. We hope that this manual will help you learn to use the product in the safest and most effective manner.
If you have any questions or concerns, please contact the dealer from whom you purchased it, or contact our Customer Support at: 1-888-784-3108.

STAINLESS STEEL BAFFLE FILTERS

About Your New Filters
Stainless Steel Baffle Filters do not need linings or mesh inside of the filters and are completely constructed out of stainless steel. The stainless steel construction allows them to be used again after being cleaned or going through the dishwasher.
How do Baffle Filters Work?
They function by forcing the grease filled air to quickly and continuously change direction as it passes through the filter. The grease is unable to change direction as fast as the air carrying them, they end up getting caught on the metal blades and then trapped into the filter tray.These filters are both efficient and require less maintenance.

IMPORTANT SAFETY INSTRUCTIONS

Read all instructions before using this appliance. Save these instructions for future references Approved for residential appliances For residential use only
CAUTION
FOR GENERAL VENTILATING USE ONLY. DO NOT USE TO EXHAUST HAZARDOUS OR EXPLOSIVE MATERIALS OR VAPORS.
CAUTION
This product Is designed for indoor residential use only.
CAUTION
To reduce risk of fire and to properly exhaust al r, do not vent exhaust air into spaces within walls, ceilings, attics, crawl spaces, or garages.
WARNING
TO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCT WORK. Install this hood in accordance with al requirements specified.
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:
A Use this unit only in the manner intended by the mansearoner. It you herequestions. contact the monde:three B. More =Meng or dearkg the we, wads power off at sent, pawl and lock mace panel charnectreg mans to amen pOnfron bets switched on Mentally. Whet the smite disconnecting means Carnet be lacked, Pear fatten a prominent waning &Me, path as a tag, to the SevICe Met C. Ingaltroon Work and Bectrkst Wens Must Be Dane By Quaffed Person(s) In Poordarce With all Apicable Codes& Standards, Inducing Rented Coutructon. D. Sufkient ail is needed for Mit 0200007n and otatteng of gems through the flue (Chimney) of fuel bunting equipment to prevent back- drafbng. Follsem the hewn; equipment menufecesers guideline and sdety sterderds such as those published by the Netronal Are Protecten ASSIX17000 (WA), Us ernerkan Sudety for Heating RehParathri and At Condoning Engineers (PSHME). and Una local code E. Wm mere Of dating into well or Ming. on net darner !MOM Meg ad Wier Ndden Sift. F. Ducted Hams net Mays be vented to the ourocors.
**   WARNING
To Reduce me Mk Of Flte Or MOM Shock Do Not Ms Tab hood With My Enna Solid State Speed Control Device.
WARNING
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the WWII of an electrical short circuit. grounding reduces the risk of electric shock by providing an escape wire for the electric current_ This appliance is equipped with a cord having a grounding Me with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.
WARNING – IMPROPER GROUNDING CAN RESULT IN A RISK OF ELECTRIC SHOCK
Consult a qualified electrician if the grounding instructions are not completely understood. or if doubt exists as to whether the appliance is properly grounded. Do not use an extension cord. If the power supply cord is too short. have a qualified electrician instal an outlet near the appliance.
WARNING
TO REDUCE THE RISK OF INJURY TO PERSONS, IN THE EVENT OF A RANGE TOP GREASE FIRE, MERV! ME FOLLOWING:
A. SMOTHER RAMS with a Om lathe Id, cookie Met, or crow metal try, Me) turn Oft Me gas PAW or the ele0Jtc element. BE CAREFULTO PREVENT BURNS. if the Bathe do not go out rovnediately. EVACUATE AND CAU. THE FIRE DEPARTMENT.
& NEVER PICK UP A PLANING PAN you may be burned. DO NOT USE WATER strop wet &Moths or towels – a violent Beam capbsan wit result.
Always Iowa safety glib and liters in piece. Without those components, opering throws couldcatch onto hair, fingers and hose clothing. She manubdurer declines all monomials/ in the event afatten) to dame the InstuctIons given here for inallaket maintenance and suitable use of the product The menubdtrer father declines al responsibility for njury due to negligence end the weeny of the isth automatic expos due Dimmers mnittenen07.
WARNING
Unplug or discerned the appliance heat the power supply berm servicing.
****WARNING*
Tits acollance Is roteresed tor normal moor reswentsm use n es not approved for commercial use. ovicloof instaisatice. instanatice over an outdoor B80 ore. of any sorter application not specifically allowed oy this manual. Damage from improper rostatration or use of trios optimise is not covered by the product warrant).

PARTS DIAGRAM

PARTS DIAGRAM

PARTS DIAGRAM

PARTS DIAGRAM

PARTS INCLUDED

PRE-INSTALLATION REQUIREMENTS

1. Do not install the Range Hood where there are many dorrs or win- dows in order to avoid effecting the exhaust efficiency caused by air convection.
2. Install the Range hood directly above the cooking surface. The recommended distance between the cooking surface and the bottom of the range is minimum 24” and Maximum 30”.
3. In order to get the optimum performance, do not extend the vent pipe too far , adjust the vent pipe, and make sure the hood is level and vertical.
4. The air outlet must not be connected to chimney flues or combustion gas ducts. The air outlet must not be connected to ventilation ducts for rooms in which fuel-burning appliances are installed.

SAFETY WARNING
HOOD MAY HAVE SHARP EDGES; PLEASE WEAR PROTECTIVE GLOVES IF ITS NECESSARY TO REMOVE ANY PARTS FOR INSTALLING, CLEANING, OR SERVICING.

INSTALLATION INSTRUCTIONS

1. 1.Drill two 8mm holes in position for Wall Anchor (Part B) placement. (See Page 5 for placement location).

2. Tap Wall anchors securely into each of the drilled holes.

3. After Wall anchors have been tapped in place, Insert 4×30 screws, but leave 1/4of the screw sticking out of the wall. (This will give your Range Hood something to hang onto).

4. Take the hood unit along with the 6Round Aluminum duct (Part D). Secure the round alumi-num duct to the vent hole at the top of the hood unit using HVAC Aluminum foil tape. If mounting to a cabinet, skip step 5 and proceed with steps 6-11.

5. If mounting to the wall only, drill a 6-1/4 round hole on the back wall above the hood, OR into the ceiling directly above the hood. 5a. Remove baffle filters from underneath the hood and set them aside. 5b. Lift the hood and hang the hood unit on the back

6. wall using the screws drilled in Step  Once the hood is securely hung on the wall, tighten the screws from the interior of the hood. 5c. Pull round aluminum duct through the newly drilled hole in the wall. Plug unit into power outlet. Reinstall baffle filters.

7. Drill a 6 – 1/4Round Hole into the bottom of the cabinet. Drill a 1 – 1/thole into the bottom of the cabinet for the Electrical Access hole. See Page 5 for hole location according to the diagram (Top View).
   6a. Pull the round duct & power cord through the bottom of the new cabinet holes.

8. Lift the hood and hang the hood unit on the back wall using the screws drilled in Step 3.

9. Once the Hood is hung to the back wall, Remove the baffle filters from underneath the hood.

10. Drill each of the five pieces of 4×30 screws (Part C) into the bottom of the cabinet using the five screw holes at the top of the hood.

11. Once the hood is secured into the cabinet, tighten the wood screws located in the back of the hood. Install Baffle filters back into place. Make sure hood is secure by pressing on it. Plug unit into power outlet.

IMPORTANT SAFETY INSTRUCTIONS

• Please always supervise children and any other individuals that should be monitored while using this appliance.
• Do not connect the air outlet to chimney fuels or combustion gas ducts.
• Do not leave unattended open flames under this hood.
• In case of any damage to power cable, replace the broken cable with a new one by a qualified professional.
• Clean the hood as instructed in this manual. If the hood is not cleaned or cleaned improperly, it may cause fire, or the range hood may function incorrectly.
• The LED lamp should be replaced by a qualified professional. Always use a 2W LED light or less.
• Do not wash the control switch with water, as it will cause elec-trical issues for the range hood.
• Do not pull the plug from the power supply with wet hands to avoid electrical shock.
• Disconnect the hood from the power supply if the appliance will not be used for an extended period of time.

OPERATING INSTRUCTIONS

Push Button Controls COMPATIBLE MODELS: UC30 / UC36

How to use the Push Button:

| Press to select on/off.
---|---
Press to select the low speed.
Press to select the medium speed.
Press to select the high speed.
Press to turn on /off the light.

OPERATING INSTRUCTIONS
Soft Touch Controls COMPATIBLE MODELS: UMC30 / UMC36
A. Light. Press to turn light on / off.
B. Timer Button
C. Minus Button (Fan Speed)
D. Plus Button (Fan Speed)
E. Fan Power Button (Starts Max Fan Speed)
F. Power Button. Press to turn unit On/Off Note: 1147flel Fen is ON + or • button ,eng go to Min or Max Settings
Setting the Clock
Clock is in Military Time and cannot be changed.

1. Hold Timer Button for 3 Seconds Use Light Button (A) to set Minutes Use Fan Speed Button (E) to set Hours
2. Once time is set, Press Timer button to complete.
3. After setting the time, leave the unit alone for 5 seconds for the changes to save.

Setting the Timer

1. Turn fan on and set to desired fan speed.
2. Press the Timer Button (B). Continue tapping the Timer Button (B) to set the time duration before the fan should automatically turn off.
3. After setting the timer, leave the unit alone for 5 seconds for the changes to save and the timer will start counting down.

RECIRCULATING CHARCOAL FILTERS

Skip this page if you are installing a Ducted Range Hood. Charcoal Filters are only included with Ductless Models
Step 1 Remove the ARC-FLOW Baffle Filters.
Step 2: Locate the motor (pictured below) and align one of the filters with the right side of the motor. Step 3: Twist and lock the liter into place. Step
4: Repeat Steps 2-3 on the left side of the motor. Step 5: Reinstall the ARC- FLOW Baffle Filters back into place. Ductless Installation: Vent duct through cabinet and attach grate on top of cabinet (sold separately).
SCAN OR CODE FOR INSTALLATION VIDEO

https://cosmoappliances.com/cfk1install/

It is recommended that the charcoal filter be replaced every 4-6 months. Charcoal filter replacements are available for purchase at: www.cosmoappliances.com Charcoal Filter Kit Part* CFK1-TM

MAINTENANCE

CAUTION: Never put your hand inside the unit while it is operating. For the best performance clean your unit frequently.
CLEANING:

1. Use only mild soap or cleaning solutions to clean the range hoods outer surface. Dry surfaces using a soft cloth.
2. Stainless Steel cleaner may be used on the external surface.
3. Cleaning the Baffle Filters: For daily cleaning, use hot, soapy water and a soft cloth. Wipe dry and finish with a damp micro-fiber cloth. Baffle filters can also be cleaned in the dishwasher.
4. Clean the Range Hood assembly once every 6 months.
5. DO NOT clean motor or electrical components with water or any other liquid.

REPLACING LIGHT BULBS
CAUTION: LED LAMP UNIT IS HOT! WAIT BEFORE ATTEMPTING BEFORE ATTEMPTING TO REPLACE LED LAMPS. PLEASE BE SURE THE UNIT IS POWERED OFF & UNPLUGGED.
NOTE: INDIVIDUAL LED BULBS CANNOT BE REPLACED. ONLY LED LAMPS.

1. Remove the baffle filters
2. Find the wire connection of the lamp and unplug.
3. Remove old LED lamp.
4. Plug in new LED lamp.
5. Reinstall the baffle filters.

TROUBLESHOOTING

CAUTION: ALWAYS UNPLUG UNIT FROM POWER BEFORE SERVICING

and remove.
If your range hood is sh 71 noisy after checking,
please cell 1-888-784-3108.| Phillips Screwdriver
My range hood has poor performance| A.The range hood and cooktop are too far away from each other.
Optimal distance is 24″ to 36″
B.There are too many open windows or doors in the area. Close some doors or windows.
C.The motor performance has decreased due to wear. Replace motor.
D.Check and make sure the tape holding down the damper flaps at the vent hole are removed before use.
E.The filters are clogged and need to be cleaned.| Phillips Screwdriver
My range hood shakes| A.The installation is not secure. Check again and make sure the installation hardware is securely mounted.
B.The fan is broken or not balanced. Re-align or replace fan.
C.The motor is loose. Check and make sure the motor is solidly mounted to the unit.
D.Baffle filter is loose and is not installed correctly. Read page 12 for Installation instructions.| Phillips Screwdriver
Range Hood does
not turn on| A.Make sure that range hood is plugged into powered outlet. Test outlet with other device if not working.
B.Remove baffle filters, reach Inside behind the control panel and locate the wire with clip. Make sure control panel is securely plugged in.| Phillips Screwdriver
Light bulbs went out| A.Replace with a new LED lamp assembly.
B.Remove baffle filters. reach inside behind the control panel and locate the wire with clip behind the light housing. Make sure the light is securely plugged in.| Phillips Screwdriver

IF YOU HAVE TRIED ALL SOLUTIONS AND STILL EXPERIENCE ISSUES, PLEASE CALL SUPPORT: 1-888-7843108.

TECHNICAL INFORMATION

UC 30/UMC 30
UC 36/UMC 36

WARRANTY AND SERVICE
For full warranty details on this product please visit:
http://www.cosmoappliances.com/warranty
TO RECEIVE WARRANTY SERVICE, YOUR
PRODUCT MUST BE REGISTERED. TO REGISTER, VISIT:
WWW.COSMOAPPLIANCES.COM/WARRANTY
SCAN TO REGISTER

https://cosmoappliances.com/WARRANTY

IMPORTANT
Do Not Return This Product To The Store If
you have a problem with this product. please contact
Cosmo Customer Support at +888)784-3106
DATED PROOF OF PURCHASE, MODEE #, AND SERIAL #
REQUIRED FOR WARRANTY SERVICE
Correct Disposal of this product: This marking indicates that this appliance shouki not be disposed with other housshold wastes. To prevent Possible horm to the environment or humon hecth from uncontrolled waste disposal, recycte it responsibly to promote the sustainable reuse of material resources.

Alsetronic version of this manual is avaitabie at.
Wery. COSMOS PHANCSS 2.11

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>