EZCOO HDMI 2.0 Splitter Switch Bi Directional User Manual
- June 14, 2024
- ezcoo
Table of Contents
EZCOO HDMI 2.0 Splitter Switch Bi Directional
OVERVIEW
EZ-SP22H2EARCO is a 2 in 2 out splitter for HDMI with Ultra HD 4K support.
This splitter reliably switch two HDMI source signal to two HDMI outputs.
Especially when you have TV do not support eARC, You can use this splitter to
emulate an eARC port and transmit high quality Atmos sound to your soundbar.
one 4K TV and one 1080P TV, It supports 4K and 1080P output simultaneously.
It supports HDMI 2.0 specification features including data rates up to 4K@60Hz
4:4:4 8bit, Dolby vision, HOR and HDCP2.2, Deep Color, 3D, Lip Sync, and HD
lossless AudioNideo formats. Output2 support ARC/eARC for soundbar when the
out2 switch set to ‘soundbar mode(ARC/eARC)’.
FEATURES
- OUT2 simulated an eARC port of your TV to connect to your soundbar.
- Distributes switch two HDMI source signal to two HDMI. displays. It supports 4K and 1080P output
- Support HDMI 2.0 4K@60Hz 4:4:4 8bit Dolby vision and HDCP 2.2.
- Support Audio DE-embed, Optical Audio out without TV
- Support EDID
- Support 30, Support deep color 30bit,
- Support Blue-Ray 24/50/60fs/HD-DVD/xvYCC.
- Dolby Digital Audio format, HDMI ports support Dolby Atmos Audio; SPDIF Optical Audio supports Dolby Digital/DTS-HD Master Audio/Dolby-AC3/DSD/LPCM/PCM 2.1/5.1CH
- Support HDMI signal re-timing, never lose
- Plug and Play; No driver required; Installs in minutes.
PRODUCT DIAGRAM
INSTALLATION
Splitter mode
- Connect 2 HDMI2.0 cable(less then 3M) from HDMI source devices to HDMI Splitter input.
- Connect 2 HDMI2.0 cable(less then 3M) from each display (monitor or projector) to the HDMI Splitter outputs.
- Out 2 switch set to ‘splitter mode’.
Soundbar mode(ARC/eARC)
- Connect 2 HDMl2.0 cable(less then 3M) from HDMI source devices to HDMI Splitter input.
- Connect 1 HDMl2.0 cable(less then 3M) from display (monitor or projector) to the HDMI Splitter output1;Connect 1 HDMl2.0 cable(less then 3M) from soundbar HDMl(ARC/eARC) to the HDMI Splitter output2
- Out2 switch set to ‘Soundbar mode(ARC/eARC)
SPECIFICATIONS
HDMI version | HDMI 2.0 | HDMI version | HDCP 2.2 |
---|---|---|---|
HDMI resolution | Up to 4K/60Hz YUV4:4:4 8bit | Video format | 24/30/36 bit deep |
color
Audio format| DTS-HD/Dolby-Atmos/DTS/Dolby-trueHD/DSD
Power adapter format I| A_C(500VH; Z,6OHZ)100VI 24 Output: DC5V/2A|
Max working| current 2000mA
Operating Temperature range| (-10 to +55C)| Max baud rate| 18Gbps
Dimension (LxWxH)| 130.2×64.7×20.2 (mm)| Weight| 160g
USING TIPS
- Re-powering and unplugging the HDMI cable is a common troubleshooting method.
- ln splitter mode, the two outputs are mirrored and can also be used as an HDMI switch2X1, not 2X2 matrix.
- ln soundbar mode, OUT2 only for audio(ARC/eARC), Please make sure all devices in the setup support ARC/eARC
- Please use qualified or brand-new HDMI 2.0 standard cable less than 3 meter.
- This device does not have an infrared receiving window. If you want to use the remote control to switch input, please connect the infrared receiving head to the IR Ext.
NOTES
Please use this machine based on below instructions to keep longer lifetime.
- The machine should be placed at the spot far away from the Damp, High-Temperature, Dusty, Erosive, and Oxidant
- All parts will be free from the strong shake, hit,
- Touching the device with the wet hands is prohibited.
- Please turn power off when machine is not used for long time.
- Please do not open the cover and do not touch the inside parts.
- Please use the original factory power adaptor.
- Before power on, please check the connection cable carefully. And make sure that all interfaces are normally connected.
DISCLAIMER
The information in this manual has been carefully checked and is believed to be accurate. EZCOO TECHNOLOGY INC. assumes no responsibility for any infringement of patents or other rights of third parties which may result from its use. EZCOO TECHNOLOGY INC. assumes no responsibility for any inaccuracies that may be contained in this document. EZCOO TECHNOLOGY INC. also makes no commitment to update or to keep current the information contained in this document. EZCOO TECHNOLOGY INC. reserves the right to make improvements to this document and/or product at any time and without notice.
CONTACTS
When you need any technical assistance, please send e-mail to
support@easycoolav.com
Visit to learn more. https://www.easycoolav.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>