CREATIVE BT-L4 Bluetoth LE Audio Transmitter Instruction Manual

CREATIVE BT-L4 Bluetoth LE Audio Transmitter

Overview

Connectivity

Bluetooth Pairing: Pairing To A New Device

Creative BT-L4 will automatically enter Bluetooth pairing mode right out the box and would remain in pairing mode for first-time pairing. For subsequent pairing, press and hold the Bluetooth button for 2 seconds to manually trigger Bluetooth pairing.

Creative BT-L4 remembers up to four paired devices at a time. To pair to a new device, repeat the steps above. When powered on, Creative BT-L4 will attempt to reconnect to the last used device.

Streaming Modes

Creative BT-L4 is set to Ultra-low Latency (ULL) mode by default. To switch between modes, follow the instructions below.

Broadcast Mode (LC3)

Broadcast mode lets the user broadcast wireless audio from an audio source to an unlimited number of supported audio devices. The LED indicator will start flashing white to indicate that it is currently broadcasting.
Note that the broadcast stream is unencrypted and any supported device can join the stream if it is within range.

Unicast Mode (LC3)

Unicast mode lets the user wirelessly connect to a compatible LE audio receiver to enjoy high-definition audio streaming on a one-to-one basis.

Super X-Fi Technology

Super X-Fi technology recreates a professional, multi-speaker system experience in your headphones by using computational audio to personalize the headphone experience based on how you hear sound to give you the most optimized and realistic listening experience. After personalizing your Super X-Fi profile, refer to the table below.

Note : If no profile was loaded onto Creative BT-L4, an audio prompt will trigger. Download the SXFI App to personalize and load your profile onto the audio transmitter.

Master Reset

Press and hold the Bluetooth button for 8 seconds to perform a Master Reset. The LED indicator will start flashing red while resetting. Creative BT-L4 will revert to its default state upon completion.

Downloadable Applications

Set up your product, personalize audio settings, enhance your product’s performance, and more with the Creative app*.

• Experience professionally-tuned audio presets for movies, music, and games
• Set up speakers and headphones’ configurations
• Configure Playback, Recording, and other settings
• Enjoy Acoustic Engine sound mode features such as Surround, Crystalizer, Bass, Smart Volume, and Dialog Plus
• Perform software upgrade, product registration, and more
  The Creative app is available on Windows only

Unleash the performance of Super X-Fi with SXFI App. The app allows you to personalize your Super X-Fi profile through an advanced Head & Ear-Mapping process for a complete holography experience.

Download SXFI App from:

• iOS App Store
• Google Play Store

Technical Specifications

• Maximum RF Output Power: 10dBm
• Wireless Frequency: 2402-2480 MHz
• USB Audio Resolution: Up to Stereo 24-bit / 96 kHz
• Wireless Playback Resolution: Up to Stereo 24-bit / 96 kHz
• Input Rating: 5V == 0.5A
• Operating Temperature: 0-45°C

WEEE

The use of the WEEE Symbol indicates that this product may not be treated as household waste. By will nep protect the environment. For more detailed information about the recycling of this product, please contact your local authority, your household waste disposal service provider or the shop where you purchase the product.

PRODUCT REGISTRATION AND WARRANTY

Registering your product ensures you receive the most appropriate service and product support available. You can register your product at creative.com/register. Please note that your warranty rights are not dependent on registration.
Creative warrants the included Creative-branded hardware product (the “Product”) against defects in materials and workmanship (“Defect(s)”) for twelve (12) months (for the European Union, twenty-four (24) months (excluding all wear and tear), subject to certain exceptions as stated in the EU Directive 1999/44/EC) from the date of purchase. The Creative Limited Hardware Warranty (the “Warranty”) does not cover (but not limited to) consumable parts, such as batteries or protective coatings that, due to their nature, tend to diminish over time; normal wear and tear, accidents or misuse. You must provide Creative proof of original purchase of the Product by a dated itemized receipt to be eligible for the Warranty. If a Defect arises and a valid claim is received during the applicable Warranty Period, Creative will at its sole option, service the
Product at no charge using new or refurbished replacement parts at our sole discretion. Warranty benefits are in addition to rights provided under local consumer laws.
For Australia only: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods. [Address: Creative Technology Ltd, 31 International Business Park, #03-01, Singapore 609921. Telephone: +65 6895 4101 (standard international call charges apply.)]

FCC

For the full terms and detailed information on the Warranty, please visit creative.com/compliance/BTL4, or scan the QR code. A printed copy is available upon request to Creative Labs, Inc., 1900 McCarthy Boulevard, Suite 103, Milpitas, CA 95035.
This device contains licence-exempt transmitter(s)/receiv- er(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This EUT is compliance with SAR for general population/uncontrolled exposure limits in IC RSS-102 and had been tested in accordance with the measure- ment methods and procedures specified in IEEE 1528 and IEC 62209. This equipment should be installed and operated with minimum distance 0 mm between the radiator and your head. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information:
FCC RF Exposure requirements: The highest SAR value reported under this standard during product certification for use next to the head with the minimum separation distance of 0mm. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>